This thesis presents the development and implementation of a machine learning prediction model for concurrently aggregating interval linear step distance predictions before future foot placement. Specifically, on-body inertial measurement units consisting of accelerometers, gyroscopes, and magnetometers, through integrated development by Xsens, are used for measuring human walking behavior in real-time. The data collection process involves measuring activity from two subject participants who travel an intended course consisting of flat, stair, and sloped walking elements. This work discusses the formulation of the ensemble machine learning prediction algorithm, real-time application design considerations, feature extraction and selection, and experimental testing under which this system performed several different test case conditions. It was found that the system was able to predict the linear step distances for 47.2% of 1060 steps within 7.6cm accuracy, 67.5% of 1060 steps within 15.2cm accuracy, and 75.8% of 1060 steps within 23cm. For separated flat walking, it was found that 93% of the 1060 steps have less than 25% error, and 75% of the 1060 steps have less than 10% error which is an improvement over the commingled data set. Future applications and work to expand upon from this system are discussed for improving the results discovered from this work. / Master of Science / This thesis presents the development and implementation of a machine learning prediction model for determining the stepping distance of future steps in real-time walking before their placement occurs. Specialized sensor units for measuring human motion activity are worn on the body for collecting and characterizing human walking behavior in real-time. Two subject participants are asked to walk a planned course consisting of flat, stair, and sloped walking elements. This work discusses the prediction algorithm voting scheme, real-time application design considerations, descriptive data elements for the algorithm, and experimental testing under which this system performed several different test case conditions. Detailed experimental tests are concluded in order to fully understand the extent of the system’s performance and the behaviors it exhibits throughout. The approach explored in this work enables researchers and roboticists to develop improvements and construct variations which may become superior to this method.

The Humanoid Walking Robot (HWR) is a research platform for the study of legged and wearable robots actuated with Hydro Muscles. The fluid operated HWR is representative of a class of biologically inspired, and in some aspects highly biomimetic robotic musculoskeletal appendages showing certain advantages in comparison to more conventional artificial limbs and braces for physical therapy/rehabilitation, assistance of daily living, and augmentation. The HWR closely mimics the human body structure and function, including the skeleton, ligaments, tendons, and muscles. The HWR can emulate close to human-like movements even when subjected to simplified control laws. One of the main drawbacks of this approach is the inaccessibility of an appropriate fluid flow management support system, in the form of affordable, lightweight, compact, and good quality valves suitable for robotics applications. To resolve this shortcoming, the Compact Robotic Flow Control Valve (CRFC Valve) is introduced and successfully proof-of-concept tested. The HWR added with the CRFC Valve has potential to be a highly energy efficient, lightweight, controllable, affordable, and customizable solution that can resolve single muscle action.

abstract: Wearable robotics is a growing sector in the robotics industry, they can increase the productivity of workers and soldiers and can restore some of the lost function to people with disabilities. Wearable robots should be comfortable, easy to use, and intuitive. Robust control methods are needed for wearable robots that assist periodic motion. This dissertation studies a phase based oscillator constructed with a second order dynamic system and a forcing function based on the phase angle of the system. This produces a bounded control signal that can alter the damping and stiffens properties of the dynamic system. It is shown analytically and experimentally that it is stable and robust. It can handle perturbations remarkably well. The forcing function uses the states of the system to produces stable oscillations. Also, this work shows the use of the phase based oscillator in wearable robots to assist periodic human motion focusing on assisting the hip motion. One of the main problems to assist periodic motion properly is to determine the frequency of the signal. The phase oscillator eliminates this problem because the signal always has the correct frequency. The input requires the position and velocity of the system. Additionally, the simplicity of the controller allows for simple implementation. / Dissertation/Thesis / Doctoral Dissertation Mechanical Engineering 2016

abstract: According to the Center for Disease Control and Prevention report around 29,668 United States residents aged greater than 65 years had died as a result of a fall in 2016. Other injuries like wrist fractures, hip fractures, and head injuries occur as a result of a fall. Certain groups of people are more prone to experience falls than others, one of which being individuals with stroke. The two most common issues with individuals with strokes are ankle weakness and foot drop, both of which contribute to falls. To mitigate this issue, the most popular clinical remedy given to these users is thermoplastic Ankle Foot Orthosis. These AFO's help improving gait velocity, stride length, and cadence. However, studies have shown that a continuous restraint on the ankle harms the compensatory stepping response and forward propulsion. It has been shown in previous studies that compensatory stepping and forward propulsion are crucial for the user's ability to recover from postural perturbations. Hence, there is a need for active devices that can supply a plantarflexion during the push-off and dorsiflexion during the swing phase of gait. Although advancements in the orthotic research have shown major improvements in supporting the ankle joint for rehabilitation, there is a lack of available active devices that can help impaired users in daily activities. In this study, our primary focus is to build an unobtrusive, cost-effective, and easy to wear active device for gait rehabilitation and fall prevention in individuals who are at risk. The device will be using a double-acting cylinder that can be easily incorporated into the user's footwear using a novel custom-designed powered ankle brace. The device will use Inertial Measurement Units to measure kinematic parameters of the lower body and a custom control algorithm to actuate the device based on the measurements. The study can be used to advance the field of gait assistance, rehabilitation, and potentially fall prevention of individuals with lower-limb impairments through the use of Active Ankle Foot Orthosis. / Dissertation/Thesis / Masters Thesis Electrical Engineering 2020

abstract: Wearable robotics has gained huge popularity in recent years due to its wide applications in rehabilitation, military, and industrial fields. The weakness of the skeletal muscles in the aging population and neurological injuries such as stroke and spinal cord injuries seriously limit the abilities of these individuals to perform daily activities. Therefore, there is an increasing attention in the development of wearable robots to assist the elderly and patients with disabilities for motion assistance and rehabilitation. In military and industrial sectors, wearable robots can increase the productivity of workers and soldiers. It is important for the wearable robots to maintain smooth interaction with the user while evolving in complex environments with minimum effort from the user. Therefore, the recognition of the user's activities such as walking or jogging in real time becomes essential to provide appropriate assistance based on the activity. This dissertation proposes two real-time human activity recognition algorithms intelligent fuzzy inference (IFI) algorithm and Amplitude omega ($A \omega$) algorithm to identify the human activities, i.e., stationary and locomotion activities. The IFI algorithm uses knee angle and ground contact forces (GCFs) measurements from four inertial measurement units (IMUs) and a pair of smart shoes. Whereas, the $A \omega$ algorithm is based on thigh angle measurements from a single IMU. This dissertation also attempts to address the problem of online tuning of virtual impedance for an assistive robot based on real-time gait and activity measurement data to personalize the assistance for different users. An automatic impedance tuning (AIT) approach is presented for a knee assistive device (KAD) in which the IFI algorithm is used for real-time activity measurements. This dissertation also proposes an adaptive oscillator method known as amplitude omega adaptive oscillator ($A\omega AO$) method for HeSA (hip exoskeleton for superior augmentation) to provide bilateral hip assistance during human locomotion activities. The $A \omega$ algorithm is integrated into the adaptive oscillator method to make the approach robust for different locomotion activities. Experiments are performed on healthy subjects to validate the efficacy of the human activities recognition algorithms and control strategies proposed in this dissertation. Both the activity recognition algorithms exhibited higher classification accuracy with less update time. The results of AIT demonstrated that the KAD assistive torque was smoother and EMG signal of Vastus Medialis is reduced, compared to constant impedance and finite state machine approaches. The $A\omega AO$ method showed real-time learning of the locomotion activities signals for three healthy subjects while wearing HeSA. To understand the influence of the assistive devices on the inherent dynamic gait stability of the human, stability analysis is performed. For this, the stability metrics derived from dynamical systems theory are used to evaluate unilateral knee assistance applied to the healthy participants. / Dissertation/Thesis / Doctoral Dissertation Aerospace Engineering 2018

Ankle exoskeletons are designed to help people with movement weakness to restore the walking ability . However, people with gait pathology, for instance, drop foot, usually have difficulties in lifting the front part of foot during gait. Thus, different from health subjects, both plantarflexion and dorsiflexion assistance are needed for them to walk better. The purpose of this thesis is to implement an EMG-­driven control strategy for a cable­driven ankle exoskeleton while exploring the use of reinforcement learning in exoskeleton control. The work uses an EMG­-driven musculoskeletal model to predict ankle joint torque. The model uses EMG signals from 4 lower­-limb muscles related to plantarflexion and dorsiflexion to obtain ankle torque and stiffness. The dynamic model for an ankle exoskeleton is built for simulation. The reinforcement learning controller is designed for the ankle exoskeleton tracking the desired ankle joint torques. Based on simulation results, two main conclusions can be drawn, one is that the proposed control strategy can provide precise torque assistance; the other is that using reinforcement learning to track the desired assistive trajectories is effective. / Ankel exoskeletons är utformade för att hjälpa människor med rörelsessvaghet att återställa gångförmågan. Men personer med gångpatologi, till exempel faller fot, har vanligtvis svårt att lyfta den främre delen av foten under gång. Således, annorlunda än hälsoämnen, behövs både plantarflexion- och dorsiflexionshjälp för att de ska kunna gå bättre. Syftet med denna avhandling är att implementera en EMG­-driven kontrollstrategi för ett kabeldrivet vristexoskelet samtidigt som man utforskar användningen av förstärkningsinlärning vid exoskeletskontroll. Arbetet använder en EMG­-driven muskuloskeletal modell för att förutsäga fotledets vridmoment. Modellen använder EMG-­signaler från 4 nedre extremiteter muskler relaterade till plantarflexion och dorsiflexion för att uppnå vridmoment och styvhet. Den dynamiska modellen för ett fotoskeleton är byggd för simulering. Förstärkningsinlärningskontrollern är utformad för fotledets exoskelett som spårar önskade vridmoment i fotleden. Baserat på simuleringsresultat kan två huvudsakliga slutsatser dras, en är att den föreslagna kontrollstrategin kan ge exakt momenthjälp; den andra är att det är effektivt att använda förstärkningslärande för att spåra de önskade hjälpbanorna.

The purpose of this thesis is to explore the subject of industrial exoskeleton in accord-ance to the applicability of the technology preventing musculoskeletal disorders within the automotive industry. The modern technology of exoskeletons has a limited field of research and knowledge and is in need to be studied to provide organisations with proper findings for understanding the applicability of the technology. In the auto-motive industry musculoskeletal disorders (MSDs) is one of the most common disor-ders among employees and industries work constantly to decrease and prevent MSDs within their work environments. By conducting literature reviews, the status of exo-skeleton research and development concluded that academic research mostly focuses on technological development of exoskeletons, and not laboratory and/or field testing of currently available industrial exoskeletons. However, through database and website searches, twenty-four available industrial exoskeletons were identified which could be applicable within the automotive industry. Through literature and a case illustration, a number of potential causes for MSDs within the automotive industry were identified and a framework was developed in order to match appropriate available industrial ex-oskeleton to be used in potentially preventing common MSDs. The discussion of the thesis highlights the benefits and challenges of implementing an industrial exoskele-ton within an industry. Proper research on the currently available industrial exoskele-tons is lacking and creates questions of reliability for the technology. However, devel-opment of industrial exoskeletons have shown to focus on prevention of the most common causes of MSDs within industries in their design and development, making the applicability of industrial exoskeletons highly possible.

Although in many of the tasks in robotics, what is sought mainly includes accuracy, precision, flexibility, adaptivity, etc., yet in wearable robotics, there are some other aspects as well that could distinguish a reliable and promising approach. The three key elements that are addressed are as follows: control, actuation, and sensors. Where the goal for each of the previously mentioned objectives is to find a solution/design compatible with humans. A possible way to understand the human motor behaviours is to generate them on human-like robots. Biologically inspired action generation is promising in control of wearable robots as they provide more natural movements. Furthermore, wearable robotics shows exciting progress, also with its design. Soft exosuits use soft materials to build both sensors and actuators. This work investigates an adaptive representation model for actions in robotics. The concrete action model is composed of four modularities: pattern selection, spatial coordination, temporal coordination, and sensory-motor adaptation. Modularity in motor control might provide us with more insights about action learning and generalisation not only for humanoid robots but also for their biological counterparts. Successfully, we tested the model on a humanoid robot by learning to perform a variety of tasks (push recovery, walking, drawing, grasping, etc.). In the next part, we suggest several soft actuation mechanisms that overcome the problem of holding heavy loads and also the issue of on-line programming of the robot motion. The soft actuators use textile materials hosting thermoplastic polyurethane formed as inflatable tubes. Tubes were folded inside housing channels with one strain-limited side to create a flexor actuator. We proposed a new design to control the strained side of the actuator by adding four textile cords along its longitudinal axis. As a result, the actuator behaviour can be on-line programmed to bend and twist in several directions. In the last part of this thesis, we organised piezoresistive elements in a superimposition structure. The sensory structure is used on a sensory gripper to sense and distinguish between pressure and curvature stimuli. Next, we elaborated the sensing gripper by adding proximity sensing through conductive textile parts added to the gripper and work as capacitive sensors. We finally developed a versatile soft strain sensor that uses silicone tubes with an embedded solution that has an electrical resistance proportional to the strain applied on the tubes. Therefore, an entirely soft sensing glove exhibits hand gestures recognition. The proposed combinations of soft actuators, soft sensors, and biologically inspired action representation might open a new perspective to obtain smart wearable robots. / Obwohl bei vielen Aufgaben in der Robotik vor allem Genauigkeit, Präzision, Flexibilität, Anpassungsfähigkeit usw. gefragt sind, gibt es in der Wearable-Robotik auch einige andere Aspekte, die einen zuverlässigen und vielversprechenden Ansatz kennzeichnen. Die drei Schlüsselelemente, sind die folgenden: Steuerung, Aktuatoren und Sensoren. Dabei ist das Ziel für jedes der genannten Elemente, eine menschengerechte Lösung und ein menschengerechtes Design zu finden. Eine Möglichkeit, die menschliche Motorik zu verstehen, besteht darin, sie auf menschenähnlichen Robotern zu erzeugen. Biologisch inspirierte Bewegungsabläufe sind vielversprechend bei der Steuerung von tragbaren Robotern, da sie natürlichere Bewegungen ermöglichen. Darüber hinaus zeigt die tragbare Robotik spannende Fortschritte bei ihrem Design. Zum Beispiel verwenden softe Exoskelette weiche Materialien, um sowohl Sensoren als auch Aktuatoren zu erschaffen. Diese Arbeit erforscht ein adaptives Repräsentationsmodell für Bewegungen in der Robotik. Das konkrete Bewegungsmodell besteht aus vier Modularitäten: Musterauswahl, räumliche Koordination, zeitliche Koordination und sensorisch-motorische Anpassung. Diese Modularität in der Motorsteuerung könnte uns mehr Erkenntnisse über das Erlernen und Verallgemeinern von Handlungen nicht nur für humanoide Roboter, sondern auch für ihre biologischen Gegenstücke liefern. Erfolgreich testeten wir das Modell an einem humanoiden Roboter, indem dieser gelernt hat eine Vielzahl von Aufgaben auszuführen (Stoß-Ausgleichsbewegungen, Gehen, Zeichnen, Greifen, etc.). Im Folgenden schlagen wir mehrere weiche Aktuatoren vor, welche das Problem des Haltens schwerer Lasten und auch die Frage der Online- Programmierung der Roboterbewegung lösen. Diese weichen Aktuatoren verwenden textile Materialien mit thermoplastischem Polyurethan, die als aufblasbare Schläuche geformt sind. Die Schläuche wurden in Gehäusekanäle mit einer dehnungsbegrenzten Seite gefaltet, um Flexoren zu schaffen. Wir haben ein neues Design vorgeschlagen, um die angespannte Seite eines Flexors zu kontrollieren, indem wir vier textile Schnüre entlang seiner Längsachse hinzufügen. Dadurch kann das Verhalten des Flexors online programmiert werden, um ihn in mehrere Richtungen zu biegen und zu verdrehen. Im letzten Teil dieser Arbeit haben wir piezoresistive Elemente in einer Überlagerungsstruktur organisiert. Die sensorische Struktur wird auf einem sensorischen Greifer verwendet, um Druck- und Krümmungsreize zu erfassen und zu unterscheiden. Den sensorischen Greifer haben wir weiterentwickelt indem wir kapazitiv arbeitende Näherungssensoren mittels leitfähiger Textilteile hinzufügten. Schließlich entwickelten wir einen vielseitigen weichen Dehnungssensor, der Silikonschläuche mit einer eingebetteten resistiven Lösung verwendet, deren Wiederstand sich proportional zur Belastung der Schläuche verhält. Dies ermöglicht einem völlig weichen Handschuh die Erkennung von Handgesten. Die vorgeschlagenen Kombinationen aus weichen Aktuatoren, weichen Sensoren und biologisch inspirierter Bewegungsrepräsentation kann eine neue Perspektive eröffnen, um intelligente tragbare Roboter zu erschaffen.

The work presented in this paper aims at developing a hydraulic actuation system for an ankle exoskeleton that is able to deliver a peak power of 250 W, with a maximum torque of 90 N.m and maximum speed of 320 deg/s. After justifying the choice of a servo hydraulic actuator (SHA) over an electro hydrostatic actuator (EHA) for the targeted application, some test results of a first functional prototype are presented. The closed-loop unloaded displacement frequency response of the prototype shows a bandwidth ranging from 5 Hz to 8 Hz for displacement amplitudes between +/-5mm and +/- 20mm, thus demonstrating adequate dynamic performance for normal walking speed. Then, a detailed design is proposed as a combination of commercially available components (in particular a miniature servo valve and a membrane accumulator) and a custom aluminium manifold that incorporates the hydraulic cylinder. The actuator design achieves a total weight of 1.0 kg worn at the ankle.