Thesis (Ph. D.)--Michigan State University. Dept. of Chemistry, 2006. / Title from PDF t.p. (viewed on Nov. 17, 2008) Includes bibliographical references. Also issued in print.

Thesis (Ph. D.)--University of Alberta, 2010. / Title from pdf file main screen (viewed on June 22, 2010). A thesis submitted to the Faculty of Graduate Studies and Research in partial fulfillment of the requirements for the degree of Doctor of Philosophy, Department of Chemistry, University of Alberta. Includes bibliographical references.

No description available.

Higher carbon chain sugars have gained increased interest recently; they are important building blocks of natural and unnatural products with biological properties. The synthesis of these higher sugar skeletons is commonly known to be achieved with the Wittig methodology which exploits phosphorus ylide chemistry. This method has been successfully used for the synthesis of the higher carbon sugars. The aim of this project was to synthesise ß,ß'-dioxo sugar-derived phosphorus ylides, a new class of ylides, as versatile intermediates to valuable higher carbon sugar derivatives and carbohydrate mimics. Model reactions were initially conducted; tetrahydro-2-furoic acid and tetrahydro-2H-pyran-4-carboxylic acid, compounds which are structurally similar to the precursor sugars, were identified as suitable model compounds. These compounds were converted to acyl chlorides and then converted to ß,ß'-dioxo phosphorus ylides precursors by acylation. The methodology proved successful and 8 examples were isolated. However, low yields were obtained due to the inevitable formation of triphenylphosphine oxide. The method was then extended to sugar derivatives, prepared using standard protecting group chemistry. It was found that acylation could be achieved using the simple acyl chloride route or peptide coupling methodology for sugar derivatives which were acid sensitive. ß,ß'-dioxo sugar-derived phosphorus ylides (16 examples) were successfully isolated in low yields. The oxidation and thermal reactivity of the ß,ß'-dioxo ylides were studied. Oxidation resulted in the successful synthesis of vicinal tricarbonyls, isolated as a mixture with the gem-diols (hydrates). The thermal decomposition of the ylides gave alkynes in moderate yields.

Higher carbon chain sugars have gained increased interest recently; they are important building blocks of natural and unnatural products with biological properties. The synthesis of these higher sugar skeletons is commonly known to be achieved with the Wittig methodology which exploits phosphorus ylide chemistry. This method has been successfully used for the synthesis of the higher carbon sugars. The aim of this project was to synthesise ß,ß'-dioxo sugar-derived phosphorus ylides, a new class of ylides, as versatile intermediates to valuable higher carbon sugar derivatives and carbohydrate mimics. Model reactions were initially conducted; tetrahydro-2-furoic acid and tetrahydro-2H-pyran-4-carboxylic acid, compounds which are structurally similar to the precursor sugars, were identified as suitable model compounds. These compounds were converted to acyl chlorides and then converted to ß,ß'-dioxo phosphorus ylides precursors by acylation. The methodology proved successful and 8 examples were isolated. However, low yields were obtained due to the inevitable formation of triphenylphosphine oxide. The method was then extended to sugar derivatives, prepared using standard protecting group chemistry. It was found that acylation could be achieved using the simple acyl chloride route or peptide coupling methodology for sugar derivatives which were acid sensitive. ß,ß'-dioxo sugar-derived phosphorus ylides (16 examples) were successfully isolated in low yields. The oxidation and thermal reactivity of the ß,ß'-dioxo ylides were studied. Oxidation resulted in the successful synthesis of vicinal tricarbonyls, isolated as a mixture with the gem-diols (hydrates). The thermal decomposition of the ylides gave alkynes in moderate yields.

Thesis (MSc)--University of Stellenbosch, 2005. / ENGLISH ABSTRACT: This investigation comprised the synthesis and characterisation of new Au(I) phosphonium ylide complexes and other compounds formed during coordination reactions. These complexes could exploit the synergism between two pharmacologically active substances (gold complex unit and phosphorus ylide) to furnish an even more active substance. Four phosphonium salts were prepared, [C6H5CH2PPh3]Br (1), [Ph3P(CH2)3PPh3]Br2 (2a), p-[{Ph3PCH2}2C6H4]Br2 (3a) and m- [{Ph3PCH2}2C6H4]Br2 (4a), by reacting PPh3 with the corresponding alkylbromides. The 13C and 1H NMR spectra of the compounds 1 – 4a indicated that many of the nuclei are magnetically inequivalent. The aromatic units in PPh3 are normally identical, but multiple, overlapping signals proved that the corresponding ortho, meta and para carbon and proton nuclei are in magnetically different environments from each other. Single crystal structures of salts 3a and 4a were determined. Different methods were followed to deprotonate the phosphonium salts to afford the corresponding ylides and to coordinate the ylides to gold precursor compounds. Most of the reactions yielded inseparable mixtures of products and pure compounds could not be isolated in large enough quantities for characterisation by all physical methods. Sufficient crystals for structure determination by X-ray diffraction were obtained. The product mixtures were characterised by 1H, 13C and 31P NMR spectroscopy and mass spectrometry. Characteristic downfield chemical shift changes after coordination of the ylides to Au(I) were observed for the carbon and phosphorus nuclei, while the protons displayed upfield shifts. Reaction of (C6F5)Au(tht) with the salts 1 – 4a, and subsequent deprotonation yielded the gold(I) ylide complexes [C6H5CH(AuC6F5)PPh3] (5), [{Ph3PCH(AuC6F5)}2CH2] (6), p-[{Ph3PCH(AuC6F5)}2C6H4] (8), and m- [{Ph3PCH(AuC6F5)}2C6H4] (9). The crystal and molecular structures of compounds 5 and 9 were determined. Deprotonation of 4a with n-BuLi, followed by reaction with (C6F5)Au(tht) yielded complexes 9 and [{Ph3PCH2}2C6H4][BrAuC6F5]2 (10). The crystal structure of compound 10 was determined. Two aurocyclic compounds, [μ- {(Ph3PCH)2CH2}2Au2][BF4]2 (12) and [μ–{(Ph3PCH)2C6H4}2Au2][BF4]2 (13) were synthesised by deprotonating salts 2b and 3b with n-BuLi and subsequently reacting the corresponding bisylides with ClAu(tht). Reaction procedures in which Ag2O was used as deprotonating agent for the phosphonium salts 2a, 3a and 4a, yielded mixtures of products. Single crystals of complexes m-[Ph3PCH(AuC6F5)C6H4CH3] (14), [C6F5Au(tht)] (15) and [(C6F5)2Au][(Ph3PCH2)2C6H4] (16) were isolated from the reaction mixtures and subjected to X-ray crystal structure determination. The molecular structure of 15 exhibited unusual aurophilic interactions and represents the first example of a linear gold chain in which the gold···gold distances systematically alternate between 3.13Å, 3.31Å and 3.20Å. Salt 2b was reacted with Ph3PAu(acac) to afford the desired compound, [{Ph3PCH(AuPPh3)}2CH2](BF4)2 (19), along with [CH3C(O)C(AuPPh3)2C(O)CH3] (17) and some byproducts. Compound 17 was characterised by single crystal Xray diffraction. The fluorobiphenylgold(I) complexes, 4,4’-[(AuPPh3)2C12F8] (21) and 2,2’- [(AuPPh3)2C12F8] (22) were synthesised by reaction of ClAuPPh3 with the lithiated 2,2’-dibromooctafluorobiphenyl and 4,4’-dibromooctafluorobiphenyl respectively. The molecular structure of 21 revealed that one of the C–Au–P bond angles deviates from linearity by 12.5°, probably as a result of π-stacking of the tetrafluorophenyl rings and steric requirements of the bulky PPh3 units. The other C–Au–P bond angle is linear [177.9(3)°]. / AFRIKAANSE OPSOMMING: Hierdie studie behels die sintese en karakterisering van nuwe fosfoniumylied goud(I)-komplekse en ander verbindings wat gedurende koördinasiereaksies vorm. Sulke komplekse kan sinergisme tussen twee farmakologies-aktiewe entiteite (goud(I) en fosfoniumylied) om ʼn meer aktiewe verbinding te vorm meebring. Vier fosfoniumsoute is berei, [C6H5CH2PPh3]Br (1), [Ph3P(CH2)3PPh3]Br2 (2a), p- [{Ph3PCH2}2C6H4]Br2 (3a) en m-[{Ph3PCH2}2C6H4]Br2 (4a), deur PPh3 met die ooreenstemmende alkielbromiedes te reageer. Die 13C- en 1H- KMR-spektra van dié verbindings toon dat ʼn aantal kerne in aromatiese ringe magneties onekwivalent is. Normaalweg is die koolstowwe in PPh3-eenhede ekwivalent, maar meervoudige, oorvleuelende pieke het nou getoon dat die ooreenstemmende orto-, meta- en para-koolstof sowel as die ooreenstemmende protonkerne in verskillende magnetiese omgewings voorkom. Die kristalstrukture van die soute 3a en 4a hierbo is met behulp van X-straal tegnieke bepaal. Verskillende metodes is gevolg om die fosfoniumsoute te deprotoneer na die ooreenstemmende yliede en om die yliede dan aan goud-bevattende uitgangstowwe te probeer koördineer. Die meeste reaksies het nie-skeibare mengsels gevorm en enkelprodukte kon nie in groot genoeg konsentrasies geïsoleer word om hulle afsonderlik te karakteriseer nie. Kristalle vir X-straal kristalstruktuur bepalings is verkry. Die produkmengsels is gekarakteriseer met behulp van 1H-, 13C- en 31P- KMR-spektroskopie en massaspektrometrie. Karakteristieke veranderinge in chemiese verskuiwings na laer veldsterktes vir die koolstof en fosfor kerne is waargeneem na koördinasie van die yliede aan Au(I), terwyl die protone na höer veldsterktes verskuif het. Die reaksie tussen (C6F5)Au(tht) (tetrahidrotiofeen) en soute 1 – 4a gevolg deur deprotonering, vorm die goud-yliedkomplekse [C6H5CH(AuC6F5)PPh3] (5), [{Ph3PCH(AuC6F5)}2CH2] (6), p-[{Ph3PCH(AuC6F5)}2C6H4] (8), en m- [{Ph3PCH(AuC6F5)}2C6H4] (9). Die kristalstrukture van komplekse 5 en 9 het al die molekulêre interaksies daarin blootgelê. Deprotonering van 4a met n-BuLi, gevolg deur reaksie met (C6F5)Au(tht) lewer komplekse 9 en [{Ph3PCH2}2C6H4][BrAuC6F5]2 (10). Die kristal- en molekulêre struktuuur van kompleks 10 is bepaal. Twee aurosikliese verbindings, [μ- {(Ph3PCH)2CH2}2Au2][BF4]2 (12) en [μ–{(Ph3PCH)2C6H4}2Au2][BF4]2 (13) is gesintetiseer deur gedeprotoneerde bisyliede verkry van 2b en 3b met substitusie van tht aan die ClAu-eenheid te koördineer. Reaksieprosedures waarin Ag2O vir deprotonering van die fosfoniumsoute 2a, 3a en 4a gebruik is, het tot mengsels van produkte aanleiding gegee. Enkelkristalle van komplekse [Ph3PCH(AuC6F5)C6H4CH3] (14), [C6F5Au(tht)] (15) en [(C6F5)2Au][(Ph3PCH2)2C6H4] (16) is geïsoleer uit die reaksies en kristalstruktuurbepalings is uitgevoer. Die molekulere struktuur van 15 toon ongewone aurofiliese interaksies en verteenwoordig die eerste voorbeeld van ʼn linieêre goudketting; met goud···goud afstande wat sistematies varieër tussen 3.13Å, 3.31Å en 3.20Å. Sout 2b is met Ph3PAu(acac) gereageer om die gewenste produk, [{Ph3PCH(AuPPh3)}2CH2](BF4)2 (19), saam met [CH3C(O)C(AuPPh3)2C(O)CH3] (17) en ander byprodukte te vorm. Verbinding 17 is as enkelkristalle Xstraalkristallografies gekarakteriseer. Die fluorobifeniel goud(I)-komplekse, 4,4’-[(AuPPh3)2C12F8] (21) en 2,2’- [(AuPPh3)2C12F8] (22), is gesintetiseer deur koördinasie van AuPPh3 aan die gelitieërde 2,2’-dibromooktafluorobifeniel en 4,4’-dibromooktafluorobifeniel respektiewelik. Die molekulere struktuur van 21 het getoon dat een van die C-Au- P bindingshoeke met 12.5º afwyk van 180º, waarskynlik as gevolg van π- interaksie van die tetrafluorofenielringe en die steriese vereistes van die groot PPh3-eenhede. Die ander C-Au-P bindingshoek is linieêr [177.9(3)°].

Synthesis and flash vacuum pyrolysis (FVP) of stabilised phosphorus ylides containing an o-amino functionalised benzene ring has been examined for the first time. Model studies using N-methyl-N-tosyl and N-mesyl-N-methyl ylides showed that the ylides could be prepared, although yields were variable, and had the expected spectroscopic properties. Upon FVP, however, the expected loss of Ph₃PO and the sulfonyl group was accompanied by unexpected transfer of the reactive site from nitrogen to carbon giving 3- substituted quinolines rather than the expected indole products. Moving to ylides with an α-cinnamoyl group (or heterocyclic analogue) did, however, result in the originally planned tandem cyclisation leading to ring-fused carbazole products. N-Benzyl was also found to be a suitable thermally labile group and a series of α-cinnamoyl N-benzyl-N-methyl ylides were prepared and characterised. For their synthesis, use of N-cinnamoylbenzotriazoles was found to be preferable to cinnamoyl chloride, requiring only half the amount of amino-functionalised phosphonium salt. While FVP of some of these ylides led to benzo-, furo- and thienocarbazoles in good yield, others again gave quinoline-type products pointing to a fine balance between the two alternative modes of cyclisation. It was noted that one of the furocarbazole products was very similar to a natural product, Eustifoline D, isolated from the medicinally active shrub Murraya euchrestifolia from Taiwan and its synthesis was planned. With a view to producing the required N-H carbazole, N,N-dibenzylamino amino ylides were prepared and were found to exhibit restricted rotation leading to broad NMR signals. Their FVP again led to both quinoline and carbazole products, with the former having usually, but not always, lost a phenyl group. Mechanistic pathways for the formation of the various products are proposed. Complete assignment of the complex ¹H NMR spectra of the various fused-ring heterocyclic products was achieved, assisted by simulations in many cases. The ylide precursor required for Eustifoline D was prepared in five steps and 10% overall yield from 5-methylanthranilic acid. The final FVP step gave a quinoline as the major product, but the minor product was Eustifoline D, spectroscopically identical to the natural product.

Thesis (Ph.D.)--McMaster University (Canada), 1991. / Source: Dissertation Abstracts International, Volume: 54-02, Section: B, page: 0835.

Abstract The first part of this monograph discusses the asymmetric, ylide based, reagent controlled epoxidations. Both different chiral ylides and epoxidation processes, stoichiometric and catalytic, are reviewed. In the following part, new chiral sulfide catalysts were discovered as enantioselective catalysts for the Corey-Chaykovsky reaction (epoxidation of aldehydes via sulfonium ylides). Using a crystal structure of an oxazolidine derivative as a starting point, a thiazolidine ligand family was designed, synthesized and finally employed as catalysts in the asymmetric epoxidation of benzaldehyde. The ligands were prepared starting from L-valine, L-tert-leucine, D-penicillamine and L-cysteine. The differently tuned thiazolidine ligands were demonstrated to catalyze the formation of trans-stilbene oxide with varying enantioselectivities. On the basis of these results, a mechanistic rationale for the asymmetric induction was presented. The results heavily demonstrated the importance of ring rigidity as an affecting factor in the enantioselectivity of the tested thiazolidines.

Yes / A range of twelve stabilised phosphonium ylides containing tetrahydrofuran, tetrahydropyran or 2,2- dimethyl-1,3-dioxolane rings have been prepared and fully characterised, including one X-ray structure determination of each type. The X-ray structures confirm the PvC and CvO functions to be syn and all the compounds undergo thermal extrusion of Ph3PO to give the corresponding alkynes. In some cases there is also competing loss of Ph3P to give different carbene-derived products and evidence has been obtained for the generation of 2-phenyloxete in this way. Raising the pyrolysis temperature leads in several cases to new secondary reactions of the alkyne products involving a sequence of alkyne to vinylidene isomerisation, intramolecular CH insertion, and retro Diels Alder reaction.