京都大学 / 0048 / 新制・課程博士 / 博士(農学) / 甲第19774号 / 農博第2170号 / 新制||農||1040(附属図書館) / 学位論文||H28||N4990(農学部図書室) / 32810 / 京都大学大学院農学研究科応用生命科学専攻 / (主査)教授 植田 充美, 教授 栗原 達夫, 教授 矢﨑 一史 / 学位規則第4条第1項該当 / Doctor of Agricultural Science / Kyoto University / DFAM

Today there are numerous methods to slow down a corrosion process of metallic materials. However, due to environmental effects and health risk issues, several traditional corrosion inhibitors have to be phased out. Hence, it is of great importance to develop new corrosion inhibitors that are “green”, safe, smart and multifunctional. In this essay, the focus is on mussel adhesive protein (MAP) and its possibility to reduce the rate of the corrosion process. The protein exhibit great adhesive strength and protective properties, allowing it to adhere to a multitude of different surfaces and is therefore of great interest of corrosion science. The protein Mefp-1, derived from the blue mussel´s foot, had been pre-adsorbed on the carbon steel surface and provided good corrosion inhibition in a basic chloride solution for a short exposure time. The protection was further improved with the assist of iron and ceria ions by formation of protein/ions complexes within the surface films and thus enhanced the corrosion protection for longer exposure time. Ceria nanoparticles were used in order to create a multi-layer composite film with an even higher corrosion protection. The results suggest a denser film compared to previous samples and a more uniform surface.

No description available.

Corrosion of metallic materials is a natural process, and our study shows that even in an alkaline environment severe corrosion may occur on a carbon steel surface. While corrosion cannot be stopped it can be retarded. Many of the traditional anti-corrosion approaches such as the chromate process are effective but hazardous to the environment and human health. Mefp-1, a protein derived from blue mussel byssus, is well known for its extraordinary adhesion and film forming properties. Moreover, it has been reported that Mefp-1 confers a certain corrosion protection for stainless steel. All these facts indicate that this protein may be developed into corrosion inhibitors with ‘green’, ‘effective’ and ‘smart’ properties. In this study, a range of surface-sensitive techniques have been used to investigate adsorption kinetics, film forming and film compaction mechanisms of Mefp-1. In situ atomic force microscopy (AFM) enables the protein adsorption on substrates to be visualized, whereas the ex situ AFM facilitates the characterization of micro- and nano-structures of the protein films. In situ Peak Force AFM can be used to determine nano-mechanical properties of the surface layers. The quartz crystal microbalance with dissipation monitoring (QCM-D) was used to reveal the build-up of the Mefp-1 film on substrates and measure the viscoelastic properties of the adsorbed film. Analytical techniques and theoretical calculations were applied to gain insights into the formation and compaction processes such as oxidation and complexation of pre-formed Mefp-1 films. The electron probe micro analyzer (EPMA) and X-ray photoelectron spectroscopy (XPS) were utilized to obtain the chemical composition of the surface layer. Electrochemical impedance spectroscopy (EIS) measurements were performed to evaluate the corrosion inhibition efficiency of different forms of Mefp-1 on carbon steel substrates. The results demonstrate that Mefp-1 adsorbs on carbon steel surfaces across a broad pH interval, and it forms a continuous film covering the substrate providing a certain extent of corrosion protection. At a higher pH, the adsorption is faster and the formed film is more compact. At neutral pH, results on the iron substrate suggest an initially fast adsorption, with the molecules oriented preferentially parallel to the surface, followed by a structural change within the film leading to molecules extending towards solution. Both oxidation and complexation of the Mefp-1 can lead to the compaction of the protein films. Addition of Fe3+ induces a transition from an extended and soft protein layer to a denser and stiffer one by enhancing the formation of tri-Fe3+/catechol complexes in the surface film, leading to water removal and film compaction. Exposure to a NaIO4 solution results in the cross-linking of Mefp-1, which also results in a significant compaction of the pre-formed protein film. Mefp-1 is an effective corrosion inhibitor for carbon steel when added to an acidic solution, and the inhibition efficiency increases with time. As a film-forming corrosion inhibitor, the pre-formed Mefp-1 film provides a certain level of corrosion protection for short term applications, and the protection efficiency can be significantly enhanced by the film compaction processes. For the long term applications, a thin film composed of Mefp-1 and ceria nanoparticles was developed. The deposited Mefp-1/ceria composite film contains micro-sized aggregates of Mefp-1/Fe3+ complexes and CeO2 particles. The Mefp-1/ceria film may promote the further oxidation of ferrous oxides, and the corrosion resistance increases with time. Moreover, phosphate ions react with Fe ions released from the surface and form deposits preferentially at the surface defect sites. The deposits incorporate into the Mefp-1/ceria composite film and heal the surface defects, which result in a significantly improved corrosion inhibition effect for the Mefp-1/ceria composite film in both initial and prolonged exposure situations / <p>QC 20130610</p>