Polylactic acid (PLA) is one of the most promising bio-compostable and biodegradable thermoplastic made from renewable sources. PLA, is typically obtained by polymerising lactide monomer. The technique mainly used for ring opening polymerization (ROP) of Lactide is based on metallic/bimetallic catalyst (Sn, Zn, and Al) or other organic catalysts in suitable solvent. However, the PLA synthesized using such catalysts may contain trace elements of the catalyst, which may be toxic. In this work, reactive extrusion experiments using stannous octoate Sn(Oct)2 and tri-phenyl phosphine (PPh)3 were considered to perform ROP of lactide monomer using ultrasound as an alternative energy (AE) source for activating and/or boosting the polymerization. Mathematical model of ROP of lactide, was developed to estimate the impact of reaction kinetics and AE source on the polymerization process. Ludovic® software, a commercial code was used. It was adopted for the simulation of continuous reactive extrusion of PLA. Results from experiments and simulations were compared to validate the simulation methodology. Results indicate that the application of AE source in reaction process boost the PLA formation rate. Result obtained through Ludovic simulation and experiments were validated. It was shown that there is a case for reducing the residence time distribution (RTD) in Ludovic due to the ‘liquid’ monomer flow in the extruder. This change in the parameters resulted in validation of the simulation. However, it was concluded that the assumption would have to be established by doing further validations. The simulation model includes the details of kinetics of reactions involved with in the process and helps to upscale the reaction output. This work also estimates the usefulness and drawbacks of using different catalysts as well as effect of alternative energies and future aspects for PLA production.

abstract: Photovoltaic (PV) systems are one of the next generation's renewable energy sources for our world energy demand. PV modules are highly reliable. However, in polluted environments, over time, they will collect grime and dust. There are also limited field data studies about soiling losses on PV modules. The study showed how important it is to investigate the effect of tilt angle on soiling. The study includes two sets of mini-modules. Each set has 9 PV modules tilted at 0, 5, 10, 15, 20, 23, 30, 33 and 40°. The first set called "Cleaned" was cleaned every other day. The second set called "Soiled" was never cleaned after the first day. The short circuit current, a measure of irradiance, and module temperature was monitored and recorded every two minutes over three months (January-March 2011). The data were analyzed to investigate the effect of tilt angle on daily and monthly soiling, and hence transmitted solar insolation and energy production by PV modules. The study shows that during the period of January through March 2011 there was an average loss due to soiling of approximately 2.02% for 0° tilt angle. Modules at tilt anlges 23° and 33° also have some insolation losses but do not come close to the module at 0° tilt angle. Tilt anlge 23° has approximately 1.05% monthly insolation loss, and 33° tilt angle has an insolation loss of approximately 0.96%. The soiling effect is present at any tilt angle, but the magnitude is evident: the flatter the solar module is placed the more energy it will lose. / Dissertation/Thesis / M.S.Tech Engineering 2011

abstract: Low temperature fuel cells are very attractive energy conversion technology for automotive applications due to their qualities of being clean, quiet, efficient and good peak power densities. However, due to high cost and limited durability and reliability, commercialization of this technology has not been possible as yet. The high fuel cell cost is mostly due to the expensive noble catalyst Pt. Alkaline fuel cell (AFC) systems, have potential to make use of non-noble catalysts and thus, provides with a solution of overall lower cost. Therefore, this issue has been addressed in this thesis work. Hydrogen-oxygen fuel cells using an alkaline anion exchange membrane were prepared and evaluated. Various non-platinum catalyst materials were investigated by fabricating membrane-electrode assemblies (MEAs) using Tokuyama membrane (# A201) and compared with commercial noble metal catalysts. Co and Fe phthalocyanine catalyst materials were synthesized using multi-walled carbon nanotubes (MWCNTs) as support materials. X-ray photoelectron spectroscopic study was conducted in order to examine the surface composition. The electroreduction of oxygen has been investigated on Fe phthalocyanine/MWCNT, Co phthalocyanine/MWCNT and commercial Pt/C catalysts. The oxygen reduction reaction kinetics on these catalyst materials were evaluated using rotating disk electrodes in 0.1 M KOH solution and the current density values were consistently higher for Co phthalocyanine based electrodes compared to Fe phthalocyanine. The fuel cell performance of the MEAs with Co and Fe phthalocyanines and Tanaka Kikinzoku Kogyo Pt/C cathode catalysts were 100, 60 and 120 mW cm-2 using H22 and O2 gases. This thesis also includes work on synthesizing nitrogen doped MWCNTs using post-doping and In-Situ methods. Post-doped N-MWNCTs were prepared through heat treatment with NH4OH as nitrogen source. Characterization was done through fuel cell testing, which gave peak power density ~40mW.cm-2. For In-Situ N-MWCT, pyridine was used as nitrogen source. The sample characterization was done using Raman spectroscopy and RBS, which showed the presence ~3 at.% of nitrogen on the carbon surface. / Dissertation/Thesis / M.S.Tech Technology 2012

xvii, 191 p. : ill. A print copy of this thesis is available through the UO Libraries. Search the library catalog for the location and call number. / For over a century, researchers from diverse intellectual disciplines have tried to explain the emergence of regional business clusters. I contribute to research on cluster emergence by applying an institutional logics framework to model how cluster emergence is influenced by such factors as supportive institutional logics, knowledge spillover, labor pooling, and technological uncertainty. This study is guided by the research question: How do institutions, specifically, varying levels of a congruous institutional logic, affect regional cluster emergence? Using the passage of the 1978 Public Utility Regulatory Policies Act (PURPA) as a catalyst for business cluster emergence in the renewable energy sector, this study examines the emergence of wind and solar energy manufacturing clusters. I test hypotheses about the positive influences of a congruous institutional logic across U.S. metropolitan statistical areas to see if the relative prevalence of a congruous institutional logic results in more firms and greater levels of clustering. For example, a pro-environmental sentiment among human populations aligns, or in other words, is congruous, with renewable energy manufacturing. I use fixed effects estimation to test several hypotheses regarding positive direct and moderating effects of institutional alignment on cluster emergence. I find that congruous institutional logics have a positive direct influence on clustering, and as technological uncertainty increases, this positive direct influence is enhanced. I find only partial support for the moderating influence of congruous institutional logics on the positive direct effect of positive externalities on clustering. This study contributes to practice and theory by building a model and supporting hypotheses on the influence of institutional fit on regional cluster emergence. / Committee in charge: Michael Russo, Chairperson, Management; Jennifer Howard-Grenville, Member, Management; Alan Meyer, Member, Management; Glen Waddell, Outside Member, Economics

Made available in DSpace on 2014-06-11T19:31:38Z (GMT). No. of bitstreams: 0 Previous issue date: 2005-02-11Bitstream added on 2014-06-13T19:20:54Z : No. of bitstreams: 1 germek_ha_dr_botfca.pdf: 758627 bytes, checksum: ff4fbece53a999632f2c85ffc32b07bd (MD5) / O estudo aborda as novas tendências da gestão ambiental em reduzir a poluição, evitando-se as queimadas de cana-de-açúcar e o aproveitando de resíduos agrícolas para fins de geração de energia alternativa, de ciclo limpo, com o emprego de biomassa, atendendo as recomendações da Agenda 21 e do protocolo de Kyoto de reduzir fontes poluidoras e melhorar a qualidade de vida e da saúde da população com o emprego de Mecanismo de Desenvolvimento Limpo - MDL. Mostra que a modelagem matemática de simulação de processos operacionais é um instrumento eficaz de gerenciamento auxiliando na tomada de decisões, possibilitando ao setor sucroalcooleiro introduzir este instrumento de gestão, pouco empregado pelo mesmo, reduzindo, com isto, riscos e custos na definição de rotas tecnológicas de processos pelas empresas. Apresenta uma equação de simulação de diversas rotas tecnológicas para adequar o tamanho do particulado do palhiço, ao sistema existente que alimenta as caldeiras e que permite avaliar as vantagens econômicas de se empregar o palhiço, e/ou a matéria estranha vegetal da colheita da cana-de-açúcar, como fonte de biomassa para fins de cogeração, juntamente com o bagaço e para isto, define a rota de menor custo. Nas simulações realizadas foi possível determinar que a rota tecnológica de menor custo de adequação dessa biomassa foi a da colheita integral seguida do recolhimento em fardos e a granel que não apresentaram diferenças significativas entre si, ressaltando que análise da simulação deve abranger ambos os setores agrícola e industrial resultando em uma visão mais adequada. Determinou-se, por equações lineares que o palhiço pode contribuir com o incremento da disponibilidade energética adicional ao bagaço na ordem de 5,59% a 55,94% dependendo das características do canavial e do percentual de recolhimento adotado... / This study reflects on the new tendencies of environmental management in reducing pollution avoiding burning the sugar-cane and taking the advantage of agricultural residues, in order to generate clean cycle of alternative energy with the utilization of biomass, meeting the recommendations of Agenda 21 and Kyoto Protocol, to reduce pollutant sources and improve the population's health and life quality, making a good use of - Clean Development Mechanism (MDL).The study shows that the mathematical modeling of operational process simulation is an effective instrument of management that supports a taking of stand, to enable the sugar-cane sector to introduce this not much utilized instrument, reducing the risks and costs in the definition of technological routes of processes by the companies. It presents an equation of simulation of several technological route to adapt the size of the fragment of the palhiço, to the existent system that it feeds the kettles and that it allows to evaluate the economical advantages of using the palhiço, agricultural residue of the crop of the sugar-cane, as biomass source for co-generation aim, together with the bagasse and for this purpose, it defines the route of smaller cost. In the accomplished simulations it was possible to determine that the technological route of smaller cost of adaptation of the palhiço (crop residues) was the one of the crop in bales following by the crop in bulk and finally for the system of crop of integral sugar cane. Emphasizing that analysis of the simulation should include both agricultural and industrial sections for not incurring in mistakes of isolated evaluation. It was also determined by linear equations that the palhiço can contribute with the increment of the additional energy readiness to the bagasse in the strip from 5,59% to 55,94% depending on the to suck cane plantation...(Complete abstract, click eletronic address below)

Doctor of Philosophy / Biochemistry and Molecular Biophysics Interdepartmental Program / Timothy P. Durrett / The direct use of vegetable oils as a biofuel suffers from problems such as high viscosity, low volatility and poor cold temperature properties. 3-acetyl-1,2-diacyl-sn-glycerols (acetyl-TAGs) have lower viscosity and freezing temperature than regular vegetable oils. However, by modifying their fatty acid composition, further improvement in their fuel properties is possible. Our goal was to develop plants that synthesize seed oils with further improved fuel properties. Euonymus alatus diacylglycerol acetyltransferase (EaDAcT) synthesizes acetyl-TAGs by the acetyl-CoA dependent acylation of diacylglycerol (DAG). Knowledge of the substrate specificity of EaDAcT for its acetyl-CoA donor and DAG acceptor substrates is important to generate the required acetyl-TAG composition in seed oil. A rapid method to quantify acetyl-TAGs was developed based on electrospray ionization mass spectrometry to gain information about the substrate specificity of EaDAcT. This method is as accurate and more rapid than the traditional radiolabeled substrate based assay and additionally provides information on acetyl-TAG molecular species present. Using this assay, EaDAcT specificity for different chain length acyl-CoA and DAGs was tested. It was found that although EaDAcT can use other short chain length acyl-CoAs as acyl donors, it has high preference for acetyl-CoA. Further, EaDAcT can acetylate a variety of DAGs with short, medium and long chain length fatty acids with high preference for DAGs containing unsaturated fatty acids. To generate acetyl-TAGs with lower molecular mass, EaDAcT was transformed into transgenic Camelina sativa lines producing high amounts of medium chain fatty acids (MCFAs). EaDAcT expression was also combined with the knockdown of DGAT1 and PDAT enzymes, which compete with EaDAcT for their common DAG substrate. High acetyl-TAG yielding homozygous T3 transgenic lines were generated but the incorporation of MCFAs into acetyl-TAGs was inefficient. A small increase in the viscosity of acetyl-TAGs from these lines was observed compared to acetyl-TAGs produced in wild type Camelina plant. The combined effect of insufficient lowering of molecular mass and increased fatty acid saturation levels of acetyl-TAGs might be responsible for this increased viscosity. Overall, it was concluded that the molecular mass and the saturation levels of fatty acids of acetyl-TAGs need to be considered at the same time in future attempts to further decrease their viscosity.

abstract: Over the past decade, there has been a revival in applied algal research and attempts at commercialization. However, the main limitation in algal commercialization is the process of cultivation, which is one of the main cost and energy burdens in producing biomass that is economically feasible for different products. There are several parameters that must be considered when growing algae, including the type of growth system and operating mode, preferred organism(s), and many other criteria that affect the process of algal cultivation. The purpose of this dissertation was to assess key variables that affect algal productivity and to improve outdoor algal cultivation procedures. The effect of reducing or eliminating aeration of algal cultures at night, in flat panel photobioreactors (panels), was investigated to assess the reduction of energy consumption at night. The lack of aeration at night resulted in anoxic conditions, which significantly reduced lipid accumulation and productivity, but did not affect log phase biomass productivity. In addition, the reduction in aeration resulted in lower pH values, which prevented ammonia volatility and toxicity. Raceways are operated at deeper cultivation depths, which limit culture density and light exposure. Experimentation was accomplished to determine the effects of decreasing cultivation depth, which resulted in increased lipid accumulation and lipid productivity, but did not significantly affect biomass productivity. A comparison of semi-continuous cultivation of algae in raceways and panels in side-by-side experiments showed that panels provided better temperature control and higher levels of mixing, which resulted in higher biomass productivity. In addition, sub-optimal morning temperatures in raceways compared to panels were a significant factor in reducing algae biomass productivity. The results from this research indicate that increasing lipid productivity and biomass productivity cannot be completed simultaneously. Therefore, the desired product will determine if lipid or biomass productivity is more crucial, which also dictates whether the system should be operated in batch mode to either allow lipid accumulation or in semi-continuous mode to allow high biomass productivity. This work is a critical step in improving algal cultivation by understanding key variables that limit biomass and lipid productivity. / Dissertation/Thesis / Doctoral Dissertation Civil and Environmental Engineering 2015

abstract: The deposition of airborne dust, especially in desert conditions, is very problematic as it leads to significant loss of power of photovoltaic (PV) modules on a daily basis during the dry period. As such, PV testing laboratories around the world have been trying to set up soil deposition stations to artificially deposit soil layers and to simulate outdoor soiling conditions in an accelerated manner. This thesis is a part of a twin thesis. The first thesis, authored by Shanmukha Mantha, is associated with the designing of an artificial soiling station. The second thesis (this thesis), authored by Darshan Choudhary, is associated with the characterization of the deposited soil layers. The soil layers deposited on glass coupons and one-cell laminates are characterized and presented in this thesis. This thesis focuses on the characterizations of the soil layers obtained in several soiling cycles using various techniques including current-voltage (I-V), quantum efficiency (QE), compositional analysis and optical profilometry. The I-V characterization was carried out to determine the impact of soil layer on current and other performance parameters of PV devices. The QE characterization was carried out to determine the impact of wavelength dependent influence of soil type and thickness on the QE curves. The soil type was determined using the compositional analysis. The compositional data of the soil is critical to determine the adhesion properties of the soil layers on the surface of PV modules. The optical profilometry was obtained to determine the particle size and distribution. The soil layers deposited using two different deposition techniques were characterized. The two deposition techniques are designated as “dew” technique and “humidity” technique. For the same deposition time, the humidity method was determined to deposit the soil layer at lower rates as compared to the dew method. Two types of deposited soil layers were characterized. The first type layer was deposited using a reference soil called Arizona (AZ) dust. The second type layer was deposited using the soil which was collected from the surface of the modules installed outdoor in Arizona. The density of the layers deposited using the surface collected soil was determined to be lower than AZ dust based layers for the same number of deposition cycles. / Dissertation/Thesis / Masters Thesis Engineering 2016

abstract: Soiling is one of the major environmental factors causing the negative performance of photovoltaic (PV) modules. Dust particles, air pollution particles, pollen, bird droppings and other industrial airborne particles are some natural sources that cause soiling. The thickness of soiling layer has a direct impact on the performance of PV modules. This phenomenon occurs over a period of time with many unpredictable environmental variables indicated above. This situation makes it difficult to calculate or predict the soiling effect on performance. The dust particles vary from one location to the other in terms of particle size, color and chemical composition. These properties influence the extent of performance (current) loss, spectral loss and adhesion of soil particles on the surface of the PV modules. To address this uncontrolled environmental issues, research institutes around the world have started designing indoor artificial soiling stations to deposit soil layers in various controlled environments using reference soil samples and/or soil samples collected from the surface of PV modules installed in the locations of interest. This thesis is part of a twin thesis. The first thesis (this thesis) authored by Shanmukha Mantha is related to the development of soiling stations and the second thesis authored by Darshan Choudhary is associated with the characterization of the soiled samples (glass coupons, one-cell PV coupons and multi-cell PV coupons). This thesis is associated with the development of three types of indoor artificial soiling deposition techniques replicating the outside environmental conditions to achieve required soil density, uniformity and other required properties. The three types of techniques are: gravity deposition method, dew deposition method, and humid deposition method. All the three techniques were applied on glass coupons, single-cell PV laminates containing monocrystalline silicon cells and multi-cell PV laminates containing polycrystalline silicon cells. The density and uniformity for each technique on all targets are determined. In this investigation, both reference soil sample (Arizona road dust, ISO 12103-1) and the soil samples collected from the surface of installed PV modules were used. All the three techniques are compared with each other to determine the best method for uniform deposition at varying thickness levels. The advantages, limitations and improvements made in each technique are discussed. / Dissertation/Thesis / Masters Thesis Mechanical Engineering 2016

abstract: This work aimed to characterize and optimize the variables that influence the Gas Diffusion Layer (GDL) preparation using design of experiment (DOE) approach. In the process of GDL preparation, the quantity of carbon support and Teflon were found to have significant influence on the Proton Exchange Membrane Fuel Cell (PEMFC). Characterization methods like surface roughness, wetting characteristics, microstructure surface morphology, pore size distribution, thermal conductivity of GDLs were examined using laser interferometer, Goniometer, SEM, porosimetry and thermal conductivity analyzer respectively. The GDLs were evaluated in single cell PEMFC under various operating conditions of temperature and relative humidity (RH) using air as oxidant. Electrodes were prepared with different PUREBLACK® and poly-tetrafluoroethylene (PTFE) content in the diffusion layer and maintaining catalytic layer with a Pt-loading (0.4 mg cm-2). In the study, a 73.16 wt.% level of PB and 34 wt.% level of PTFE was the optimal compositions for GDL at 70 °C for 70% RH under air atmosphere. For most electrochemical processes the oxygen reduction is very vita reaction. Pt loading in the electrocatalyst contributes towards the total cost of electrochemical devices. Reducing the Pt loading in electrocatalysts with high efficiency is important for the development of fuel cell technologies. To this end, this thesis work reports the approach to lower down the Pt loading in electrocatalyst based on N-doped carbon nanotubes derived from Zeolitic Imidazolate Frameworks (ZIF-67) for oxygen reduction. This electrocatalyst perform with higher electrocatalytic activity and stability for oxygen reduction in fuel cell testing. The electrochemical properties are mainly due to the synergistic effect from N-doped carbon nanotubes derived from ZIF and Pt loading. The strategy with low Pt loading forecasts in emerging highly active and less expensive electrocatalysts in electrochemical energy devices. This thesis focuses on: (i) methods to obtain greater power density by optimizing content of wet-proofing agent (PTFE) and fine-grained, hydrophobic, microporous layer (MPL); (ii) modeling full factorial analysis of PEMFC for evaluation with experimental results and predicting further improvements in performance; (iii) methods to obtain high levels of performance with low Pt loading electrodes based on N-doped carbon nanotubes derived from ZIF-67 and Pt. / Dissertation/Thesis / Masters Thesis Mechanical Engineering 2016