Global ETD Search

471	Monitorovací systém pro sledování chodu laboratoře / Monitoring system for monitoring of laboratory processes Bachmayer, Marek January 2020 (has links) The presented work deals with the development of a monitoring system for monitoring the operation of the laboratory. The theoretical part of the work includes information on the safety of operation and work in biological laboratories, measured physical quantities and the principle of their measurement. The monitoring system is built on a compact ESP32-CAM camera and a WeMos D1 development board. The practical part consists of the design and implementation of a given system and the creation of a full-stack application for displaying live input from the laboratory for monitoring measured quantities in real time.
472	Digitální AM/FM vysílač / Digital AM / FM transmitter Kováč, Marek January 2014 (has links) This master thesis is focused on the theoretical description and practical implementation of software defined transmitter. The main aim of this thesis was made the prototype of software defined transmitter in FM band. Theoretical part is determined to description of basic parts of equipment and working principles to understand the basic principle of digital transmitters and define the appropriate component base for construction. Discussed are used types of A/D and D/A converters, blocks of digital signal processing and the roles, which these components performs. The second part is focused practical. Specified are suitable types of components and block diagram is proposed for following electrical connection and printed circuit board in Eagle program as a plug-in modul for developmental platform Arduino. The main point is program, which sets and controls the transmitter. Next important part is impedance match and antenna tuning, which is explain in practical part of thesis. The result is prototype of software defined transmitter compatible with Arduino Uno platform.
473	A 3D-printed Fat-IBC-enabled prosthetic arm : Communication protocol and data representation Engstrand, Johan January 2020 (has links) The aim of this thesis is to optimize the design of the Fat-IBC-based communication of a novel neuroprosthetic system in which a brain-machine interface is used to control a prosthetic arm. Fat-based intra-body communication (Fat-IBC) uses the fat tissue inside the body of the bearer as a transmission medium for low-power microwaves. Future projects will use the communication system and investigate ways to control the prosthetic arm directly from the brain. The finished system was able to individually control all movable joints of multiple prosthesis prototypes using information that was received wirelessly through Fat-IBC. Simultaneous transmission in the other direction was possible, with the control data then being replaced by sensor readings from the prosthesis. All data packets were encoded with the COBS/R algorithm and the wireless communication was handled by Digi Xbee 3 radio modules using the IEEE 802.15.4 protocol at a frequency of 2.45 GHz. The Fat-IBC communication was evaluated with the help of so-called "phantoms" which emulated the conditions of the human body fat channel. During said testing, packet loss measurements were performed for various combinations of packet sizes and time intervals between packets. The packet loss measurements showed that the typical amount of transmitted data could be handled well by the fat channel test setup. Although the transmission system was found to be well-functioning in its current state, increasing the packet size to achieve a higher granularity of the movement was perceived to be viable considering the findings from the packet loss measurements. prosthetic arm bionic arm 3D-printing intra-body communication ibc fat tissue fat-ibc arduino xbee 802.15.4 cobs cobs/r packet loss serial transmission armprotes 3D-utskrift intrakroppslig kommunikation fettvävnad paketförlust seriell överföring Communication Systems Kommunikationssystem Embedded Systems Inbäddad systemteknik Medical Materials Medicinska material och protesteknik
474	Water Quality Device : Testing Through Electronic Measurements / Water Quality Device : Testing Through Electronic Measurements Adnan Abdu, Jihad, Lundström, Philip January 2023 (has links) Water is the source of all life, but unfortunately, the water quality is getting only worse due to many factors like overuse, contamination, indifference and even by nature itself. By identifying the problem, we are one step closer to solving the problem, and that is why an intelligent water quality device is required to examine water and detect impurities within it. In this project, we are developing a device that uses an entirely new method to measure water quality. Even though the theory behind the device is very advanced, the device is still primitive in its functions and needs development to increase the usefulness and accuracy of the measurements! / Vatten är grunden till allt liv, men tyvärr blir vattenkvaliteten bara sämre på grund av många faktorer som överanvändning, förorening, likgiltighet och till och med av naturen själv. Genom att identifiera problemet är vi ett steg närmare att lösa problemet, och detta är därför en intelligent vattenkvalitetsenhet behövs för att undersöka vattnet och hitta orenheter i det. I detta projekt utvecklar vi en apparat som använder en helt ny metod för att mäta vattenkvaliteten. Även om teorin bakom apparaten är väldigt avancerad så är apparaten fortfarande primitiv i sina funktioner och behöver utveckling för att öka användbarheten och noggrannheten i mätningarna! Water Quality Water Electronics Physics Embedded Systems Pollution Water Pollution Water Quality Device Arduino Uno Rev3 Vattenkvalitet Förorening Vatten Vattenförorening Embedded Systems Inbäddad systemteknik Annan elektroteknik och elektronik Nano Technology Nanoteknik Physical Sciences Fysik Annan geovetenskap och miljövetenskap
475	Tying Tourettic Threads Together Frueh, Andrew 25 September 2014 (has links) No description available. Engineering Experiments Fine Arts Information Technology Mental Health Multimedia Communications Performing Arts Robotics robotics Arduino interface electronics modular 3d print laser cut RepRap fabrication open source creative commons DIY hacking making Tourette twitch tic neurology behaviour disability simulation affect performance installation
476	The Design and Evaluation of Ambient Displays in a Hospital Environment Koelemeijer, Dorien January 2016 (has links) Hospital environments are ranked as one of the most stressful contemporary work environments for their employees, and this especially concerns nurses (Nejati et al. 2016). One of the core problems comprises the notion that the current technology adopted in hospitals does not support the mobile nature of medical work and the complex work environment, in which people and information are distributed (Bardram 2003). The employment of inadequate technology and the strenuous access to information results in a decrease in efficiency regarding the fulfilment of medical tasks, and puts a strain on the attention of the medical personnel. This thesis proposes a solution to the aforementioned problems through the design of ambient displays, that inform the medical personnel with the health statuses of patients whilst requiring minimal allocation of attention. The ambient displays concede a hierarchy of information, where the most essential information encompasses an overview of patients’ vital signs. Data regarding the vital signs are measured by biometric sensors and are embodied by shape-changing interfaces, of which the ambient displays consist. User-authentication permits the medical personnel to access a deeper layer within the hierarchy of information, entailing clinical data such as patient EMRs, after gesture-based interaction with the ambient display. The additional clinical information is retrieved on the user’s PDA, and can subsequently be viewed in more detail, or modified at any place within the hospital.In this thesis, prototypes of shape-changing interfaces were designed and evaluated in a hospital environment. The evaluation was focused on the interaction design and user-experience of the shape-changing interface, the capabilities of the ambient displays to inform users through peripheral awareness, as well as the remote communication between patient and healthcare professional through biometric data. The evaluations indicated that the required attention allocated for the acquisition of information from the shape-changing interface was minimal. The interaction with the ambient display, as well as with the PDA when accessing additional clinical data, was deemed intuitive, yet comprised a short learning curve. Furthermore, the evaluations in situ pointed out that for optimised communication through the ambient displays, an overview of the health statuses of approximately eight patients should be displayed, and placed in the corridors of the hospital ward. ambient displays AmI hospital healthcare ambient intelligence ubiqtuitous computing calm technology ubicomp weiser health care technology shape-changing interface shape changing interface shape-changing display shape changing display biometrics remote communication social awareness system peripheral awareness hospital technology nurses medical personnel body area networks dual-task experiment common information space arduino electronic medical record vital signs data visualisation prototypes Engineering and Technology Teknik och teknologier
477	Design and evaluation of a visual rapid prototyping environment in an existing smart home platform Hamada, Skander January 2017 (has links) Recent advances in the field of Internet of Things (IoT) are placing its own vision, as a platform of interconnected services and devices, at the heart of the smart home concept. This consolidation promises a new wave of innovative products designed in the open, and in which the user takes center stage starting from the very first steps. Therefore, researchers as well as product designers in these increasingly related fields are now tasked with a more complex mission when investigating user behavior. In this thesis we consider rapid prototyping as the upcoming standard process for investigating user interactions in the future smart home. Although past research contributed with several self-contained solutions (built from scratch) to allow such investigations, no accounts were found tackling the problem from our perspective, in which the focus is on how to enable rapid prototyping in an existing proprietary smart home platform by using open standards, software and hardware. To answer this question, we conducted our research with participation of academic researchers and professional designers in the context of an academic and industrial partnership, in an ongoing smart home research project. We used an approach based on the design science research process in combination with the user centered design (UCD) and agile software development methodologies. During this thesis we performed an end to end design process starting from ideation to implementation and evaluation; an architectural blueprint was proposed and a working prototype of our visual smart home rapid prototyping environment (SHRPE) was implemented and tested. The obtained results demonstrate the feasibility of enabling visual rapid prototyping capabilities in an existing smart home platform, by using the system integration process to introduce available open standards, software and hardware tools into the platform. In addition, evaluation results of user testing confirmed that using UCD to iteratively capture user needs in such complex context is a solid approach. Visual rapid-prototyping Rapid prototyping Internet of things IoT Smart home Product design Open standards User centered design UCD Design science Agile Environment System integration Ideation Design thinking Arduino User research workshop CoAP Visual tool Node-red Internet of things and people IOTAP Software architecture Hardware prototyping Engineering and Technology Teknik och teknologier
478	Green Relationship Imad, Fadel 01 May 2014 (has links) Green Relationship is a design solution attempting to raise awareness toward the environment and reduce consumerism. Waste generation and pollution have become major concerns of many governments, municipalities, organizations and individuals around the world since they are affecting human wellbeing and the environment. As an MFA student with VCUQatar, I chose to use design to contribute in protecting the environment hoping to make a difference in life. The thesis includes a research and a design component. The research explores the recycling programs and facilities in Qatar, the governmental and private sector actions toward waste generation and collection, as well as precedent solutions applied around the world. Furthermore, it includes a survey on recycling to gather and analyze the community’s feed back in order to come up with a solution that aims to change people’s behavior toward waste generation and to promote green lifestyle. The design component defines the Green Relationship as the personal connection between the individual and the silent partner, “the environment.” It fulfills the basic survival needs, “food and water,” and the one and only independency need, “oxygen.” The elements of the Green Relationship are the projection of the generic relationships elements we know of through the theory of “Humimicing” that I introduce in my thesis. Humimicing is the design theory that mimics human innate attributes and behaviors to develop design concepts to be applied in different industries. Every element of the Green Relationship is visualized through a different design discipline similar to its nature. Therefore, interactive, product and critical designs are the mediums used to represent Green Communication, Care and Ethics respectively through public installation, experimentation and conceptual design definition. The thesis methodology, which is “Make it Personal,” concludes in creating the Green Relationship that aims to change the behavior of individuals and ultimately to reach out to the wider community. Under the maxim, “Green is not just a color; it is a Lifestyle,” the thesis promotes the use of design to inspire people, designers and manufacturers to consume less and generate less waste in order to save natural resources and the environment. Green Relationship Humimicing Environmental awareness Green Care Green Love Green Ethics Green Communication Green lifestyle Recycling facilities in Qatar Recycling programs in Qatar Recycling solutions Recycling survey in Qatar Adopt a plant Reduce consumerism Make it personal Design and behavioral change Design and group dynamics Environment Product design and environment Interactive design and environment Critical design and environment Breathing mask Talking plants Design for change Design and community Recycling Change behavior Design ethics Design and natural resources Design and 3D printing Design & Society Social behavior & Group dynamic Green care & Product design Green ethics & Critical design Greenship Green Matts Green Jewels Community gardening Beauty of trash Green relationship course Green relationship book Green portable nursery Design and environment Protect the environment Design an consumerism Multidisciplinary designs Imad Fadel Manufacturing and design Consume less Arduino boards Plants with visual communication Plants with audible communication Plants with birth certificate Art and Design Arts and Humanities
479	Snižování hluku kolejových vozidel v traťových obloucích / Reduction of noise of the railway vehicles in line arcs Navrátil, Václav January 2019 (has links) reducing noise, noise in railway transport, management of application of products for modification of adhesion

Search results