This study focuses on the potential of using a single beam echosounder as a tool for recognition and assessment of seafloor vegetation. Seafloor vegetation is plant benthos and occupies a large portion of the shallow coastal bottoms. It plays a key role in maintaining the ecological balance by influencing the marine and terrestrial worlds through interactions with its surrounding environment. Understanding of its existence on the seafloor is essential for environmental managers. / Due to the important role of seafloor vegetation to the environment, a detailed investigation of acoustic methods that can provide effective recognition and assessment of the seafloor vegetation by using available sonar systems is necessary. One of the frequently adopted approaches to the understanding of ocean environment is through the mapping of the seafloor. Available acoustic techniques vary in kinds and are used for different purposes. Because of the wide scope of available techniques and methods which can be employed in the field, this study has limited itself to sonar techniques of normal incidence configuration relative to seafloors in selected regions and for particular marine habitats. For this study, a single beam echosounder operating at two frequencies was employed. Integrated with the echosounder was a synchronized optical system. The synchronization mechanism between the acoustic and optical systems provided capabilities to have very accurate groundtruth recordings for the acoustic data, which were then utilized as a supervised training data set for the recognition of seafloor vegetation. / In this study, results acquired and conclusions made were all based on the comparison against the photographic recordings. The conclusion drawn from this investigation is only as accurate as within the selected habitat types and within very shallow water regions. / In order to complete this study, detailed studies of literature and deliberately designed field experiments were carried out. Acoustic data classified with the help of the synchronized optical system were investigated by several methods. Conventional methods such as statistics and multivariate analyses were examined. Conventional methods for the recognition of the collected data gave some useful results but were found to have limited capabilities. When seeking for more robust methods, an alternative approach, Genetic Programming (GP), was tested on the same data set for comparison. Ultimately, the investigation aims to understand potential methods which can be effective in differentiating the acoustic backscatter signals of the habitats observed and subsequently distinguishing between the habitats involved in this study.

La prima parte dell’elaborato presenta le origini e lo sviluppo delle politiche di valutazione del rischio per le sostanze chimiche. Dopo un primo inquadramento storico, l’attenzione è stata dedicata a temi emergenti come la valutazione delle incertezze, la necessità di integrazione delle valutazioni del rischio per l’uomo e per l'ambiente. La seconda parte presenta l’evoluzione delle politiche di valutazione del rischio dei prodotti fitosanitari, soprattutto a livello europeo (dall’applicazione della direttiva 91/414 all’attuale regolamento 1107/2009), con particolare attenzione all’applicazione del principio di precauzione. Il terzo capitolo approfondisce le fasi e gli approcci delle attuali procedure di valutazione ambientale del rischio dei pesticidi usati a livello europeo e americano; è stato in particolar modo esplorato il tema dell’individuazione degli obiettivi specifici di protezione in fase preliminare di valutazione del rischio. Il quarto capitolo tratta di un tema attualmente molto dibattuto, ovvero la valutazione dei potenziali effetti combinati sugli organismi non bersaglio esposti a più sostanze attive simultaneamente. Infine, l’obiettivo del quinto capitolo è quello di valutare la contaminazione ambientale dovuta all’applicazione di fungicidi a base rame su melo. A tale scopo è stato testato un nuovo modello per il calcolo integrato dell’esposizioni umana e ambientale MERLIN – Expo, sviluppato grazie al progetto europeo 4FUN. I risultati ottenuti per le acque superficiali e il sedimento sono stati confrontati con i risultati degli attuali modelli usati in Unione Europea, i modelli FOCUS. Le simulazioni probabilistiche hanno anche permesso di effettuare valutazioni di incertezza e sensitività sui parametri utilizzati nelle simulazioni. / This PhD thesis is a multidisciplinary work on the risk assessment of plant protection products including both legislative and scientific aspects. The first part of the thesis introduces the origin of risk assessment procedures with a wide glance on the whole process of risk analysis to protect the humans and the environment. The accent is put on emerging issues and trends, such as the uncertainties appraisal, the necessity of integration between human and environmental impacts without ignoring socio- economic and behavioural factors. The second chapter deals with the origin and development of global risk assessment policies on pesticides. It focuses in particular on European policies, from the original Directive 91/414 to the current Regulation 1107/2009 and the application of the precautionary principle. A brief comparison with US approaches for risk assessment is also presented. The third chapter gives an overview on the risk assessment procedures that nowadays provide the highest achievable protection for the environment, starting with the definition of clear and specific protection goals. The fourth chapter addresses the issue of combined risk assessment of pesticides: current approaches for the evaluation of effects on non-target organisms are analysed. The last chapter is dedicated to the estimation of the environmental contamination following the application of copper –based fungicides sprayed on orchards by using MERLIN - Expo, which is a multimedia model developed in the frame of the FP7 EU project 4FUN. The performance of the MERLIN- Expo software in estimating the contamination of the metal is also analysed through a comparison with the currently used FOCUS standard models for the calculation of pesticides concentrations in surface water and sediment. Both deterministic and probabilistic simulations have been run; the latter has allowed to perform uncertainty and sensitivity assessment.