This master´s thesis puts mind to choice and suggestion of suited type of DC/DC tension converter for power supply of power LED. It shows comparison of available types of accumulators in The Czech Republic and types of DC/DC converters used in construction of the sample. The choice of available source of energy is subordinated to final weight and size of a battery. There are also some explicit requirements for the smallest possible size and highest effictivity. So the choice is aimed only for converters with a simple coil and minimum numbers of switching elements to realize the converter, for example by SMT technology. One of many possibilities is LTC3453 circuit, which is described in this thesis, assembled and measured. On the basis of this circuit the next two samples are assembled. Here I try to suppress problems from previous circuit and expand it´s possibilities by adding the control of luminance via the microcontroller ATtiny. Then is introduced the basic description of flashlight Petzl MYO XP which is available in stores.

This semestral project is concerned with remote control PTZ camera using the wireless controller, and the controller design including design documents. The controller will be composed of the signal converter, microcontroller and RF module. Control data to the controller will come via link RS485 and controller will be able to communicate using the following protocols-Ernitec and Pelco. The proposed controller, according to data from the manufacturer to have a range of up to 500m. This parameter and also other transmission parameters confirm in the diploma thesis which will focus the actual implementation of the controller.

This semestral project is concerned with remote control PTZ camera using the wireless controller, and the controller design including design documents. The controller will be composed of the signal converter, microcontroller and RF module. Control data to the controller will come via link RS485 and controller will be able to communicate using the following protocols-Ernitec and Pelco. The proposed controller, according to data from the manufacturer to have a range of up to 500m. This parameter and also other transmission parameters confirm in the diploma thesis which will focus the actual implementation of the controller.

The thesis deals with lithium accumulators with electronics, which are composed to a unit called Intelligent Battery. Within this thesis, the main features of these accumulators are explained and the circuit to monitor these accumulators has been designed and manufactured, it can disconnect them when the parameters are exceeded, and it stores the history of the battery measurement in memory. It also allows reading of current and logged battery data via UART. The computer application is designed for communication, to display the information and to adjust the battery circuit parameters. The electronics secure charging when the 24V adapter is connected according to the set parameters and it also secure balancing of the individual accumulators.

This work discusses about nowadays problematic of the electronic comutation motors.This work also describes the opportunity of electronic control of these motors. The result of this work is realization of electronic control circuit from discreet components. There also are mentioned is proposal of electronic control board from SMD components. This control board include temperature control with ventilator switching , commutation logic, PWM speed control. In the last part of this paper are results of evaluation measurements of EC motor.