Portland clinker is thanks to its large-scale production a continuously studied topic. Clinker, or Portland cement, is used for construction purposes, or for insulation and special applications. One of these special applications could be shielding of different types of radiation by making use of the content of barium ions. The present master’s thesis examines the influence of barium oxide on the formation and properties of Portland clinker, which could be, by incorporation of barium ions into the system, used as a binder for buildings resistant to various types of radiation. Barium sulfate and barium carbonate were added to the raw meal in order to prepare clinkers with different content of barium oxide. The effect of barium on the formation of clinker phases was studied (by XRD – Rietveld analysis and by the microscopic point integration), as well as the effects on the variations of temperature of the phase formation (TG-DTA) and the rate of alite formation under isothermal conditions. Furthermore, the ability of barium to become a part of clinker minerals was studied by SEM with EDS, and the solubility of barium phases by ICP-OES. The hydration of clinker minerals containing barium was studied by isothermal calorimetry.

Polymer and composite polymer-ceramic nanofibers were prepared by electrospinning process. Solution of 20 wt.% polyvinylidene fluoride (PVDF) in a mixture of dimethyl sulfoxide (DMSO) and acetone in the ratio of 7:3 was chosen as the most suitable precursor. When preparing composite nanofibers, 20 wt.% of barium calcium zirconate titanate (BCZT) or barium titanate (BT) nanoparticles was added to this PVDF solution. Given parameters were defined as the most suitable for the process of electrospinning: voltage of 50 kV, feeding rate of 30 l/min, distance between emitter and collector of 20 cm and needle diameter of 17 G. The effect of polymer molecular weight and the rotation speed of collector was also studied. Various properties of prepared samples were studied: morphology and fiber diameter, phase composition with the use of x-ray diffraction and Fourier transform infrared spectroscopy and also chosen electrical properties. Lower fiber diameters appeared with lower polymer molecular weight and higher rotation speed of the collector. These parameters resulted in higher percentage of the piezoelectric phase as well. The smallest achieved fiber diameter was around 300 nm, the highest percentage of phase was 92 % and the highest piezoelectric constant had a value of 16 pC/N. Composite fibers filled with BT particles showed better properties that the ones filled with BCZT particles.

This work is focused on the study of perovskite ferroelectric materials group and monitoring changes their dielectric parameters in temperature and frequency dependence Is described scrystallographic systems of barium titanate and their influence on material properties. The measured values are mathematically interpreted using the Curie – Weiss law and discussed about the influence of strontium titanite on important dielectric parameters.

The submitted thesis describes characteristics and use of the ferroelectric material which has their utilization in electronics and electro technical industry. The thesis describes behaviour ferroelectrics in temperature range. A suitable workplace was designed and its functionality was verified in selected ferroelectrics samples dependence of temperature of components of complex permittivity.

This thesis studies the properties and the applications of prospective ferroelectric materials which are used in electrical engineering and electronic industry. Further are physically explained and mathematically described the basic principles running in their structure. The practical part is aimed to build a workplace for measuring the components of the complex permittivity in the frequency and temperature area, controlled by the programmed measurement and service application using the Agilent VEE Pro 8.0 and MS Excel. The functionality of the workplace was verified on the selected material samples by measurement and evaluation of selected properties. For this issue was created electronic text, which can be used as a guide for laboratory exercises and it is an integral part of this work.