Sockelkonstruktionen är en del av grundkonstruktionen i en byggnad där yttervägg möter mark. Den är en utsatt del av en byggnads klimatskärm och exponeras både för det svenska klimatet och markfukt. Projektering av en sockelkonstruktion är tidskrävande och kräver stor kunskap inom flera områden för att uppnå de krav som ställs. Syftet med denna rapport är att underlätta och förbättra projekteringen av sockelkonstruktioner hos uppdragsgivande byggkonstruktionsföretaget Kåver & Mellin. För att uppfylla syftet är målet att rapporten ska fungera som ett vägledande underlag som kan användas vid projektering av sockelkonstruktioner. Underlaget ska utgå från kriterierna funktion, beständighet, byggbarhet och utformning. Genom en litteraturstudie i kombination med kvalitativ datainsamling och kvalitativa intervjuer med sakkunniga i byggbranschen framställdes resultatet. Detta har legat till grund för analys och slutsats. Resultatet visar att det finns många sätt att utforma en sockelkonstruktion för att uppnå det krav som ställs. Viktiga faktorer vid utformning av sockelkonstruktioner är byggprojektets förutsättningar och de i sockelkonstruktionen ingående delarnas möten och material. Mer ingående rekommendationer återfinns i rapporten under slutsatser. Resultatet indikerade också att det inte finns tydliga regler för hur sockelkonstruktioner ska utföras. Olika regelverk tolkas olika vilket visar på ett behov av att informationen tydliggörs. Denna rapport kan ses som ett vägledande underlag att använda vid projektering av sockelkonstruktioner. / The base of the construction where the outer wall is connected to the ground plate is the connection dealt with in this report. We refer to it as the base. The base leads the loads from the building down to the ground and is supposed to protect the building from outer impact. This part of the building shell is well exposed with the Swedish climate and in constant contact with wet ground. Forming a base is difficult in many ways and demands knowledge in many different areas. It takes a great amount of time and it is hard to be sure that you fulfill the specific demand of each construction in each project. The aim of this report is to make the process of forming a base easier and better for the sponsoring company Kåver & Mellin. The report is supposed to lead to a written report that could be used as a guide when forming bases. The report is based on the four criterias: function, constructability, constancy and shaping. The result came from studying literature, interviewing experts in the branch of building construction combined with sorting drawings of bases from former projects at Kåver & Mellin. The result has been analyzed and lead to several wide and narrow conclusions about bases. The result showed that there are many ways of forming a base to reach the demand of each project. Aspects to think about when forming a base is the demands of each project and the materials and connections in the base. The result also showed that there are no clear directions of how to form a base in a building. Different laws and rules can be read in different ways depending on who is reading which shows that the guidelines could be clearer. This report is a guide of how to think when forming a base in a building.

Master´s thesis describes foundation of reinforced concrete framed building and preliminary design of upper construction. Calculation of internal forces was performed by computer program SCIA Engineer like 3D model. This substructure is designed as water resistant construction that is supported by deep foundations.

The topic of the master thesis is new medico-social facility hospice St. Michaela. The purpose of the object is the maximizing of improvement in the quality of life of dying, severely ill and incurable patients, with the use of palliative care. The construction follows the Complex of Regional Hospital Náchod. Together with as a retirement home Náchod completes a support network of health and social care. The building is designed as a four-building storey and is partially embedded into the sloping terrain. Floors are divided into individual facilities and together constitute a functional unit. In the basement is the technical room, warehouses, garages and kitchen facilities. On the ground floor are then socio-public rooms and facilities. On the second floor is located hedmaster of hospice and accommodation area. The third floor is devoted to the accommodation area. The proposed structure made of brick longitudinal system, supplemented by concrete basement walls. The horizontal structure is made of filigree ceiling panels. Stairs are designed as a precast concrete and steel. Individual roof structures is made from unwalkable, walkable and vegetation compositions. The cladding consists of ventilated facade of glass and wooden panels. Foundations are designed from the lineal foundation.