Diploma thesis deals with the deceleration of the motorcycles with the use of engine braking. Work can by divided into theoretical and practical part. The theoretical part begins with the possibility of division motorcycles according to several criteria. Below is given the primary papers of literature, usable in connection with the issue of this work. Subsequently, the work discusses the factors which are affecting the course of the deceleration with the use of engine braking. The practical part acquaints the reader with available measuring devices, with the place of measurement and the methodology. The following are listed specific measured values for individual motorcycles, supplemented with graphical output. At the end of the practical part is for comparison a brief summary of the measured values of each tested vehicle. Interpretation and evaluation of the measured data are contained in the conclusion of the work.

This thesis is dealing with measuring the deceleration of lorries when they are braked by the engine. The weight of the vehicles given is bigger than 12 tons. The thesis can be divided into theoretical and practical part. In the theoretical part there are special presumptions to manage the given problem successfully. The stress is on the construction of lorries and on driving resistances which influence the process of deceleration a lot. The thesis also analyses the technical solution of each possibilities of braking and also the function of the gearbox. In the practical part the method of measuring is described. The measurement devices are also given through which the measurements were realized. The main part of this work is made by measured values of each lorries and the interpretation of measured values itself. The final evaluation of measured data are mentioned at the end of the thesis.

The thesis describes function and characteristics of spring and damper, their particular way and margin of influence on vehicle behavior in selected riding maneuvers. The goal is to maintaining maximal grip, control, and achieve predictable vehicle handling.

Táto diplomová práca sa zaoberá implementáciou bezpečnostnej funkcie pre elektrický aktuátor, ktorá spočíva v riadení BLDC motora, po výpadku napájacieho napätia, keď je aktuátor poháňaný vstavanou pružinou.. Celé riadenie motora je navrhnuté v prostredí Matlab-Simulink technikou nazývanou návrh systému z modelu. Následne pomocou automatického generovania kódu bol získaný zdrojový kód, ktorý bol použitý v reálnom aktuátore a odtestovaný v reálnych podmienkach. Cieľom týchto testov bolo overiť reálnu možnosť nasadenia vyvinutých algoritmov v reálnych, komerčne dostupných produktoch.