In recent years there is an increasing awareness of the importance of chiral phosphorus ligands in transition metal organometallic chemistry because of the utility of such complexes in homogeneous catalytic reactions. This thesis deals with synthetic, spectroscopic and X-ray crystallographic studies on ruthenium complexes of chiral and achiral P-N-P type ligands, known as "diphosphazanes", with emphasis on ruthenium carbonyl clusters. Several ruthenium carbonyl clusters have been synthesized and characterized by elemental analyses, ER and NMR (lH, nC and 3lP) spectroscopic data. In several instances, the molecular structures of the clusters have been confirmed by single crystal X-ray diffraction studies. Chapter 1 provides a brief overview of various types of chiral phosphorus ligands and general synthetic routes to diphosphazanes. A brief review of the transition metal chemistry of diphosphazanes and diphosphazane chalcogenides (published since 1994) is presented A review of the literature on the carbonyl clusters of the group-8 transition metals (Fe, Ru, Os) bearing mono- and diphosphines is also included in this chapter The scope and aim of the present investigation is outlined at the end of this chapter. Chapter 2 provides the results obtained in the present investigation and a detailed discussion of the spectroscopic and crystallographic data. The essential feature of the work is summarized at the end of the chapter. Chapter 3 gives a detailed account of the experimental procedure for the synthesis of the compounds and spectroscopic and analytical measurements. The experimental details of X-ray structure determination are also given in this chapter. To save space, the coordinates of the H-atoms and the calculated and observed structure factor tables are not included. In some cases, reference to CCDC deposition number is included. The references of the literature are compiled at the end of the thesis and are indicated in the text by appropriate numbers appearing as superscripts. The compounds synthesized in the present study are represented by bold Arabic numerals and are listed in Appendix I. The abbreviations employed in the thesis conform to those generally used in Chemical Abstracts.

De nouveaux processus de cyclisation d’allènes fonctionnalisés catalysées par des triflates métalliques sont présentés. Deux stratégies ont été développées. Dans un premier temps, une réaction de type carbonyl-ène intramoléculaire à partir de cétones γ-alléniques est développée. Cette réaction se déroule dans des conditions très douces avec une charge catalytique en triflate de bismuth(III) de seulement 1 mol%. Cette stratégie a ensuite été étendue à d’autres dérivés cétones γ-alléniques. Les alcools diéniques résultants ont pu être engagés avec succès dans une réaction de type Diels-Alder menant à la formation de structures polycycliques fonctionnalisées avec de bons rendements et une excellente régio- et diastéréosélectivité. La cyclisation d’éthers d’énol catalysée par les triflates métalliques a été par la suite étudiée. Cette stratégie permet d’obtenir des dérivés cyclopentènes avec de bons rendements en utilisant seulement 0,1 mol% de triflate de bismuth(III). Des dérivés dihydrofuranes peuvent être également formés par cette stratégie. Ces produits résultent de l’attaque nucléophile du carbone central de l’allène sur l’éther d’énol activé. Cette réactivité a pu être inversée en utilisant un complexe d’or(I) comme catalyseur en présence d’un nucléophile externe, donnant ainsi naissance à des produits différents. Dans une dernière partie, des applications dans le domaine de la chimie des arômes et des parfums ont été développées. Des dérivés acétates et alcools alléniques ont été synthétisés et exposés à des tests olfactifs, révélant des tonalités olfactives intéressantes. Des notes fruitées et florales dominantes et des nuances vertes et boisées ont été détectées. / Novel processes of metal triflate-catalyzed cyclizations of functionalized allenes are presented. Two strategies have been developed. In a first part, the intramolecular carbonyl-ene reaction with γ-allenic ketones is described. This reaction proceeds under very mild conditions using only 1 mol% of bismuth(III) triflate. The scope of this reaction was extended to several γ-allenic ketone derivatives, featuring various substitution patterns. The resulting dienols were successfully engaged in a Diels-Alder reaction allowing the formation of polycyclic functionalized frameworks in good yields with excellent regio- and diastereoselectivities. In a second part, the metal triflate-catalyzed cyclization of allenic-enol ethers is described. This reaction gives access to cyclopentene derivatives in good yields using only 0.1 mol% of bismuth(III) triflate. Dihydrofuran derivatives could also be formed using this strategy. This cycloisomerisation reaction proceeds through an initial enol ether activation, followed by the nucleophilic attack of the allene moiety. This reactivity could be inverted using a gold(I) catalyst, in the presence of an exogenous nucleophile, allowing the formation of different products. Within our interest in flavor and fragrance chemistry, allenic acetates and alcohols have been synthesized and subjected to olfactive evaluation, revealing dominant fruity and floral notes. Green and woody undertones have been detected as well.

The thesis presented here is focused on the synthesis of iron-bismuth alkoxides and siloxides as precursors for multiferroic BiFeO₃ systems. Spectrum of novel cyclopentadienyl substituted iron-bismuth complexes of the general type [{Cp^y(CO)₂Fe}BiX₂], as potential precursors for cyclopentadienyl iron-bismuth alkoxides or siloxides [{Cp^y(CO)₂Fe}Bi(OR)₂] (R-O^tBu, OSiMe₂^tBu), were obtained and characterised. The use of wide range of cyclopentadienyl rings in the iron carbonyl compounds allowed for a comprehensive analysis of its influence on structure, reactivity as well as solubility of the studied complexes, which are crucial features of potential precursors. The results fill the gap in the chemistry of cyclopentadienyl iron-bismuth complexes. In this work a new method of preparation of novel alkoxides or siloxides iron-bismuth complexes has been developed. In the reaction of Fe₂(CO)₉ with Bi(O^tBu)₃ or Bi(OSiMe₂^tBu)₃ molecular precursors for preparation of heterobimetallic oxides were obtained. Moreover, characterised compounds allowed to extend the knowledge about existence of iron-bismuth clusters and open new ways for the further investigations on the carbonyl iron-bismuth siloxides and alkoxides. The resulting compounds are good single source precursors for the BiFeO₃ materials. The presented synthetic route can be generalized and other heterobimetallic compounds can be obtained. This work should also be helpful in the designing new precursors for synthesis of metal oxides.

Zur stereoselektiven Herstellung von α-Hydroxyketonen aus prochiralen Ketonen stellen die Alkoholdehydrogenasen eine ökologische als auch ökonomische Alternative zu den verfügbaren industriellen Syntheserouten dar. Zurzeit stoßen sowohl die Biokatalyse als auch die organische Katalyse bei der Herstellung von sterisch anspruchsvollen α-Hydroxyketonen an ihre Grenzen. Die Synthese von enantiomerenreinem (R)-Phenylacetylcarbinol [(R)-PAC] und S- Phenylacetylcarbinol [(S)-PAC] aus dem prochiralen α-Diketon Phenylpropan-1,2-dion (PPD) stellt eine anspruchsvolle Synthese sowohl für akademische als auch für industrielle Zwecke dar. Diese chiralen Bausteine dienen als Vorgänger bei der Synthese von (‒)-Ephedrin und (+)-Pseudoephedrin. (‒)-Ephedrin und (+)-Pseudoephedrin werden jährlich in großen Mengen hergestellt, was zunehmend ein ernsthaftes ökologisches Problem darstellt. Aufgrund ihrer Toxizität als auch ihre Persistenz in der Umwelt, beispielsweise in Abwasserkläranlagen, wurden sie kürzlich als neu auftauchende Kontaminanten eingestuft. In dieser Arbeit wurde die Biodegradierung der Isomere von Ephedrin untersucht. Dabei wurde der neue Stamm Arthrobacter sp. TS-15 isoliert, welcher mit Ephedrin als einzige Kohlenstoffquelle wachsen kann. Dieser Stamm wurde bei der DSMZ unter der Nummer (DSM 32400) hinterlegt. Das Genom dieses Stammes wurde sequenziert und unter der Zugangsnummer (SDXQ00000000) in der Genbank verwahrt. Anhand verschiedener phylogenetischer Untersuchungen wurde TS-15 als eine Subspezies von Arthrobacter aurescens eingeordnet. Des Weiteren wurde der Einfluss der Isomerie von Ephedrin auf dessen Biodegradierung sowie auf die Wachstumsrate von TS-15 untersucht. Es wurde festgestellt, dass das Isomer (‒)-Pseudoephedrin am langsamsten abgebaut wird und dementsprechend einen negativen Einfluss auf das Kulturwachstum hat. Hingegen zeigte sein Enantiomer (+)-Pseudoephedrin die schnellste Biodegradierung mit einem positiven Effekt auf das Wachstum von TS-15. Anhand der Analyse der Metabolite im Kultivierungsmedium als auch aus den Zellextrakten von TS-15 wurde ein neuer katabolischer einleitender Schritt detektiert, in dem das Ephedrin zu Methcathinon VII oxidiert wird. Zur Bestimmung der oxidierenden Enzyme wurden Proteinanreicherungsverfahren eingesetzt. Mittels Peptidmassenfingerprints wurden 51 Proteinhits ermittelt. Nach einer kombinierten Analyse mittels der Proteinhits und des rationalen Genomminings wurde ein neues Gencluster zum Abbau von Ephedrin identifiziert. Zwei postulierte Dehydrogenasen wurden aus dem Genom isoliert, kloniert und in dem E. coli T7 SHuffle Stamm heterolog exprimiert. Dadurch wurden neue enantiokomplementäre Enzyme entdeckt. Die Pseudoephedrin Dehydrogenase (PseDH) ist enantiospezifisch für (+)-S,(N)-(Pseudo-)-Ephedrin, während die Ephedrin Dehydrogenase (EDH) nur die enantiospezifische Oxidation von (‒)-R,(N)-(Pseudo-)-Ephedrin katalysieren kann. Beide Dehydrogenasen sind NADH-abhängig und der Superfamilie der kurzkettigen Dehydrogenasen untergeordnet. Bei der Charakterisierung dieser Dehydrogenasen konnte gezeigt werden, dass das Substratspektrum wertvolle chirale Produkte umfasst. Beide Dehydrogenasen zeigen strikte Regio- und Enantioselektivität gegenüber dem α-Diketon Phenylpropan-1,2-Dion (PPD). Somit wurde PPD zu (S)-PAC (ee >99%) und (R)-PAC (ee >99%) mittels PseDH bzw. EDH mit vollem Umsatz reduziert. Darüber hinaus wurde die Kristallstruktur der PseDH im Rahmen einer Zusammenarbeit mit der Universität von York mit einer Auflösung von 1,8 Å aufgeklärt. Die Kristallstruktur wurde in PDB unter der Zugangsnummer (6QHE) hinterlegt. Mittels der Kristallstruktur der PseDH und des Homologiemodells der EDH wurden Strukturanalysen durchgeführt und die ersten Hypothesen zur Funktionsweise dieser Enzyme aufgestellt. Des Weiteren wurden über Peptidsequenzanalysen zu diesen Enzymen Rückschlüsse auf ihren evolutionären Ursprung gezogen. Die Stabilität der Dehydrogenasen wurde mit unterschiedlichen Lösungsmitteln bestimmt. CPME wurde als geeignetstes organisches Lösungsmittel für die Biokatalyse mit diesen Enzymen ermittelt. Beide Enzyme wurden mittels eines organisch-wässrigen Zweiphasensystems unter enzymgekoppelter Cofaktorregenerierung getestet. Dadurch wurde der Zugang zur Produktion von (S)-PAC und (R)-PAC aus PPD mittels PseDH bzw. EDH geschaffen.

A series of ruthenium complexes of the general type Ru(CO)2(P(n-Bu)3)2(O2CR)2 (4a, R = Me; 4b, R = Et; 4c, R = i-Pr; 4d, R = t-Bu; 4e, R = CH2OCH3; 4f, R = CF3; 4g, R = CF2CF3) was synthesized by a single-step reaction of Ru3(CO)12 with P(n-Bu)3 and the respective carboxylic acid. The molecular structures of 4b, 4c and 4e–g in the solid state are discussed. All ruthenium complexes are stable against air and moisture and possess low melting points. The physical properties including the vapor pressure can be adjusted by modification of the carboxylate ligands. The chemical vapor deposition of ruthenium precursors 4a–f was carried out in a vertical cold-wall CVD reactor at substrate temperatures between 350 and 400 °C in a nitrogen atmosphere. These experiments show that all precursors are well suited for the deposition of phosphorus-doped ruthenium layers without addition of any reactive gas or an additional phosphorus source. In the films, phosphorus contents between 11 and 16 mol% were determined by XPS analysis. The obtained layers possess thicknesses between 25 and 65 nm and are highly conformal and dense as proven by SEM and AFM studies. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Nos últimos anos, a preparação de substâncias enantiomericamente puras tornou-se uma preocupação constante e um desafio para a indústria. Tal fato é consequência da relação tênue entre a estrutura espacial das substâncias e os diferentes sabores, odores, processos farmacocinéticos e farmacodinâmicos e toxicidade que elas desempenham no organismo. Nesse contexto, a síntese assimétrica de compostos carbonílicos ?-alquil substituídos opticamente ativos tem recebido grande atenção já que estes são importantes blocos de construção na síntese de fármacos quirais e produtos naturais. Assim, o presente trabalho buscou o desenvolvimento de metodologias que permitissem a preparação desses compostos enantiomericamente puros através do controle na formação de centros estereogênicos usando a biocatálise. Para isso, foram preparadas diversas olefinas ativadas por grupos retiradores de elétrons (carbonila) utilizando dois procedimentos, a saber, reações de condensação aldólica e esterificação. Esses compostos carbonílicos ?,?-insaturados foram obtidos com bons rendimentos (48-94%) e foram submetidos à reduções biocatalíticas mediadas por células íntegras de micro-organismos. Inicialmente, utilizou-se a olefina (E)-4-fenil-3-metil-3-buten-2-ona (51a) como substrato modelo para a otimização das condições experimentais e determinação daquela que fornecesse o produto biorreduzido com a melhor conversão e pureza enantiomérica. Nesses testes, avaliaram-se diversos parâmetros reacionais, tais como, composição do meio reacional (aquoso, bifásico e tamponante), presença de aditivos (glicose e catalisador de transferência de fase), diferentes micro-organismos e efeito do uso de resina adsorvente Amberlite XAD-7. Dessa forma, a biorredução em meio aquoso, sem aditivos, mediada pela levedura LSC-II e com a utilização da resina Amberlite XAD-7 foi a condição reacional que apresentou o melhor excesso enantiomérico (81%) e foi a selecionada para um estudo metodológico que avaliou os efeitos estérico e eletrônico dos substituintes. Observou-se que a posição do substituinte no ?-aril, o alongamento do ?-substituinte e a adição de um grupamento éster apresentaram um importante papel na estereosseletividade da reação. Por fim, avaliou-se a aplicação da metodologia na síntese enantiosseletiva da muguesia, uma fragrância floral. Os resultados obtidos revelaram o grande potencial da metodologia na biorredução quimiosseletiva de compostos carbonílicos ?,?-insaturados e preparação de substâncias opticamente ativas. / In recent years, the preparation of enantiomerically pure compounds has become a concern and a challenge to the industry. This fact is a consequence of the tenuous relationship between the spatial structure of substances and the different flavors, odors, pharmacokinetic and pharmacodynamic processes and toxicity that they play in the body. In this context, the asymmetric synthesis of ?-alkyl substituted optically active carbonyl compounds has received great attention because they are important building blocks in the synthesis of chiral drugs and natural products. Thus, this study aimed to develop methodologies that allow the preparation of this enantiomerically pure compounds by controlling the formation of stereogenic centers using biocatalysis. To this end, various activated olefins substituted with electron withdrawing groups (carbonyl) were synthesized using two procedures, aldol condensation and esterification reactions. These ?,?-unsaturated carbonyl compounds were obtained in good yields (48-94%) and subjected to the biocatalytic reduction mediated by whole cells of microorganisms. Initially, we used the olefin (E)-3-methyl-4-phenyl-3-buten-2-one (51a) as a model substrate for the optimization of the experimental conditions and determine wich one provide the product with better conversion and enantiomeric purity. In these tests, we evaluated various reaction parameters such as the composition of the reaction medium (aqueous, biphasic and buffer), the presence of additives (glucose and phase transfer catalyst), different microorganisms and adsorbing effect of using Amberlite XAD-7. Thus, the biorreduction in aqueous medium, without additives, mediated by LSC-II yeast and with the application of Amberlite XAD-7 was the reaction condition that presented the best enantiomeric excess (81%) and was selected for a methodological study that evaluated the steric and electronic effects of the substituents. It was observed that the substituent in the ?-position of the aryl group, the size increase of the ?-substituent and the presence of an ester group had an important role in the stereoselectivity of the reaction. Finally, application of the methodology on muguesia enantioselective synthesis, a floral fragrance, was evaluated. The results obtained showed the high potential of the methodology in chemoselective bioreduction of ?,?-unsaturated carbonyl compounds and preparation of optically active substances.

A queima de biomassa é uma atividade amplamente difundida em muitos países tropicais em desenvolvimento. Esta atividade tem implicações em escala regional e global devido à emissão de quantidades significativas de gases traço para a atmosfera, tais como: CO, hidrocarbonetos não metanicos (HCNM) e material particulado (MP). Os resíduos da cana-de-açúcar representam 11% da produção mundial de resíduos agrícolas, cuja queima libera quantidades expressivas de gases e partículas que influenciam a química da atmosfera. No Brasil, nos últimos anos houve um aumento do uso de etanol como combustível e um aumento nas plantações de cana-de-açúcar no Estado de São Paulo. Apesar da proibição das queimadas, episódios de queima são ainda muito freqüentes, uma vez que 50 % dos canaviais paulistas são queimados na etapa de pré-colheita. O presente estudo teve como objetivo avaliar as emissões de VOCs provenientes da queima da palha de cana-de-açúcar. Para estimar o impacto ambiental causado por esse processo de combustão em regiões urbanas próximas as queimadas foram feitos estudos em laboratório e campo. A contribuição biogênica dos compostos carbonílicos na região do canavial foi avaliada e os resultados mostraram que as folhas de cana-de-açucar, na maioria dos experimentos, não atuaram como fonte de emissão. Os experimentos de laboratório permitiram determinar os produtos de combustão incompleta na pluma. Medidas de emissão de CO, CO2, e VOC foram caracterizadas pela razão de emissão (ER) e fator de emissão (EF). Razões de mistura, em ppbv, de formaldeído (175 - 309), acetaldeído (2 - 71), acetona (1 - 36), acroleína (0,3 - 3), propionaldeído (0,2 - 10), crotonaldeído (3 -10), butiraldeído (1 - 3), benzaldeído (0,5 - 6), valeraldeído - total (2 - 60) e hexaldeído (4 - 136) foram identificados e quantificados; e outros VOCs, tais como, aromáticos, haletos de alquila, compostos contendo nitrogênio, furanos foram apenas identificados. No laboratório também foi avaliado a eficiência da combustão da palha de cana-deaçúcar (ΔCO/CO2 = 4,0±0,4%) e foi observado que a fase flaming foi predominante neste processo. A contribuição dos compostos carbonílicos na atmosfera de regiões urbanas próximas às queimadas foi avaliada através da comparação entre as medidas feitas antes e durante a queima. Os resultados estatísticos mostraram que as medidas nos dois períodos são diferentes sugerindo que a origem dos compostos é diferente. Fontes de emissão direta e principalmente reações fotoquímicas foram responsáveis pela presença de formaldeído e acetaldeído nas amostras coletadas antes da queima (medidas diurnas), enquanto que apenas fontes de emissão direta foram responsáveis pela presença desses compostos nas amostras coletadas durante a queima (medidas noturnas). Trajetórias de massas de ar que chegaram à área urbana e os focos de queima registrados nos dias de coleta mostraram que a região urbana estudada foi afetada pelas queimadas. / Biomass burning is an activity widely practiced in many tropical developing countries. This activity has implications at regional and global scales due to the emissions of significant quantities of trace gases to the atmosphere such as CO, non-methane hydrocarbons (NMHC) and particulate matter (PM). The sugar cane residues represent 11% of worldwide production of agricultural residues whose burning releases significant amounts of gases and particles that influence the atmospheric chemistry. In the last years, in Brazil, there has been an increase of the use of the ethanol as fuel and an increase of the sugar cane plantations in the State of São Paulo. Although the sugar cane burning prohibition, burning episodes are still very frequent, as 50% of the sugar cane plantations of São Paulo are burned in the the pre-harvest stage. The aim of this study was to evaluate VOC emissions of sugar cane burning. In order to estimate the environmental impact caused by the combustion process in urban regions near fires laboratory and field studies were conducted. The contribution of biogenic carbonyl compounds in the area of sugar cane was evaluated and results showed that the cane sugar leaves, in the most of the experiments, do not act as emission source. Laboratory experiments were carried out to determine incomplete combustion products in plume. Measurements of CO, CO2, and VOC were characterized by the emission ratio (ER) and emission factor (EF). Mixture ratio, in ppbv, of formaldehyde (175 - 309), acetaldehyde (2 - 71), acetone (1 - 36), acrolein (0,3 - 3), propionaldehyde (0,2 - 10), crotonaldehyde (3 -10), butyraldehyde (1 - 3), benzaldehyde (0,5 - 6), valeraldehyde-total (2 - 60) and hexaldehyde (4 - 136) were identified and quantified; and other VOCs, such as aromatic hydrocarbons, alkyl halides, nitrogen containing compounds and furans were only identified. The efficiency of the sugar cane combustion was evaluated (ΔCO/CO2 = 4.0±0.4%) in the laboratory and the predominant burning phase was the flaming phase. By comparing statistically filed measurements done before and during fire in the atmosphere of urban areas near fires, it was possible to distinguish two different groups of the measurements suggesting that the origin of the compounds is different. Direct emission sources and mainly photochemical reactions were responsible by the presence of formaldehyde and acetaldehyde in samples collected before fire (daytime measurements), whereas only direct emission sources were responsible by the presence of these compounds in samples collected during the fire (night measurements). Trajectories of air masses that reached the urban area and spots of burning recorded in the sampling days showed that the region studied was affected by fires.

Made available in DSpace on 2014-12-17T15:41:56Z (GMT). No. of bitstreams: 1 ManuellaKCR_DISSERT.pdf: 3952261 bytes, checksum: 56cf586893164ffedc3ec29beb8e775a (MD5) Previous issue date: 2010-08-31 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Were synthesized ferrites of NiZn on systems Ni0,5Zn0,5Fe2O4, the precursors citrate method. The decomposition of the precursors was studied by thermogravimetric analysis and spectroscopy in the infrared region, the temperature of 350?C/3h. The evolution of the phases formed after calcinations at 350?C/3h, 600, 1000 and 1100?C/2h was accompanied by X-ray diffraction using the Rietveld refinement method for better identification os structures formed. Was observed for samples calcined at different temperatures increased crystallinity with increasing calcination temperature, being observed for the samples calcined at 900 and 1100 ? C/2h was the precipitation of a secondary phase, the phase hematite. The ferrocarbonila of industrial origin was analyzed by X-ray diffraction and Rietveld for the identification of its structure. The carbonyl iron was added NiZn ferrite calcined at 350?C/3h, 600, 900, 1000 and 1100?C/2h to the formation of hybrid mixtures. They were then analyzed by Xray diffraction and Rietveld. The NiZn ferrite and ferrocarbonila as well as the hybrid mixtures were subjected to analysis of scanning electron microscopy, magnetic measurements and reflectivity. The magnetic measurements indicated that the ferrite, the ferrocarbonila, as well as hybrid mixtures showed characteristics of soft magnetic material. The addition of ferrocarbonila in all compositions showed an increase in the results of magnetic measurements and reflectivity. Best result was observed in the increase of the magnetization for the hybrid mixture of Ferrocarbonila / ferrite of NiZn calcined at 600?C/2h. The mixture Ferrocarbonila / ferrite calcined 1000?C/2h presented better absorption of electromagnetic radiation in the microwave / Foram sintetizadas ferritas de NiZn no sistema Ni0,5Zn0,5Fe2O4, pelo m?todo dos citratos precursores. A decomposi??o dos precursores foi estudada por an?lise termogravim?trica e espectroscopia na regi?o do infravermelho na temperatura de 350?C/3h. A evolu??o das fases formadas ap?s calcina??es a 350?C/3h, 600, 1000 e 1100?C/2h foi acompanhada por difra??o de raios X utilizando o refinamento de Rietveld para melhor identifica??o das estruturas formadas. Foi observado para as amostras calcinadas em diferentes temperaturas o aumento da cristalinidade com o aumento da temperatura de calcina??o, sendo verificado que para as amostras calcinadas a 900 e 1100?C/2h ocorreu a precipita??o de uma fase secund?ria, a fase hematita. A ferrocarbonila de proced?ncia industrial foi analisada por Difra??o de raios X e por Rietveld para a identifica??o de sua estrutura. A ferrocarbonila foi adicionada ? ferrita de NiZn calcinada a 350?C/3h, 600, 1000 e 1100?C/2h para a forma??o das misturas h?bridas. Em seguida foram analisadas por difra??o de raios X e por Rietveld. A ferrita de NiZn, a ferrocarbonila, assim como as misturas h?bridas foram submetidas ? an?lises de Microscopia Eletr?nica de Varredura, medidas magn?ticas e refletividade. As medidas magn?ticas indicaram que a ferrita, a ferrocarbonila, como tamb?m as misturas h?bridas apresentaram caracter?sticas de material magn?tico macios. A adi??o de ferrocarbonila em todas as composi??es indicou um aumento nos resultados de medidas magn?ticas e de refletividade. Foi verificado melhor resultado no aumento da magnetiza??o para a mistura h?brida de Ferrocarbonila/ferrita de NiZn calcinada 600?C/2h. A mistura Ferrocarbonila/ferrita calcinada 1000?C/2h apresentou melhor resultado absor??o da radia??o eletromagn?tica na faixa de microondas em rela??o ?s outras misturas

A deficiência de ferro é o resultado de um longo período de balanço negativo do ferro, culminando na exaustão do estoque de ferro do organismo. Isto é revelado quando a concentração de hemoglobina declina para valores abaixo dos limites normais e então aparece a anemia, que ocorre devido à deficiente síntese de hemoglobina, com diminuição da proliferação eritrocitária. A anemia ferropênica é considerada o maior problema de saúde no idoso e está associada com várias complicações, incluindo doença cardiovascular, disfunção cognitiva, aumento no risco de morte, e principalmente tem um significante efeito na qualidade de vida. Estudos revelam que a anemia por deficiência de ferro causa maior susceptibilidade aos agentes oxidantes. Utilizando técnica espectrofotométrica, foram determinadas as atividades das enzimas antioxidantes catalase (CAT), glutationa peroxidase (GPx) e superóxido dismutase (SOD) e quantificada a glutationa total (GSH) nos eritrócitos dos pacientes. Também determinou-se o dano oxidativo nas proteínas plasmáticas e no hemolisado celular pelo método do carbonil a 360 nm. Os níveis da peroxidação lipídica (MDA) e da vitamina C foram determinados por cromatografia líquida de alta performance (HPLC). Os participantes da pesquisa foram selecionados de Ambulatórios de Atenção Básica de Saúde da Região Norte do Rio Grande do Sul, sendo que 17 indivíduos apresentaram anemia ferropênica e hipertensão primária e 18 apenas hipertensão primária devido à dificuldade de selecionar pacientes sem nenhuma patologia associada. Todos os indivíduos assinaram o termo de consentimento livre e esclarecido. Os dados obtidos foram expressos como médias ± desvio padrão e analisados utilizando-se o Teste t-Student. Os resultados do trabalho mostram que os indivíduos com anemia ferropênica apresentam atividade significativamente elevada da SOD e da CAT em relação aos indivíduos controle, mas não apresentaram diferença na atividade da GPx nem da GSH. Observamos também, dano oxidativo em proteínas plasmáticas, mas não no hemolisado celular. Os pacientes com anemia ferropênica mostraram dano oxidativo em proteínas plasmáticas significativamente maiores, assim como um aumento significativo da produção de MDA no soro, como um indicativo do aumento da auto-oxidação dos lipídios sob condições de estresse oxidativo. Os níveis séricos da vitamina C não mostraram diferença significativa entre os grupos. Estes dados revelam o envolvimento de espécies reativas de oxigênio no agravamento da anemia carencial. Sendo assim, reforça-se a necessidade de diagnosticar e tratar esses pacientes precocemente, diminuindo a magnitude dos efeitos da anemia na saúde do idoso. / Iron deficiency is the outcome of a long period of negative iron balance, culminating in exhaustion of the body’s iron stores. This is revealed when hemoglobin concentration declines to values below normal levels and anaemia is detected, due to a deficient synthesis of hemoglobin, with decrease in eritrocitary proliferation. Iron deficiency anaemia is considered the most important health problem in elderly and it is associated with various complications, including cardiovascular disease, cognitive dysfunction, increased risk of death and, mostly, it has a meaningful effect in the quality of life. Studies reveal that iron deficiency anaemia cause higher susceptibility to oxidant agents. Using spectrophotometric techniques, the activities of antioxidant enzymes, catalase (CAT), glutathione peroxidase (GPx), superoxide dismutase (SOD) and total glutathione (GSH) were quantified in the erythrocytes of the patients. We also determined oxidative damage of plasma proteins and in hemolysate using the carbonyl assay at 360 nm. The levels of lipid peroxidation (MDA) and vitamin C were determined by highperformance liquid chromatography (HPLC). Participants in this study were selected in Ambulatories of Basic Health Attention in the North of the State of Rio Grande do Sul. 17 individuals presented iron deficiency anaemia and primary hypertension and 18 only primary hypertension, because it was difficult to select patients without any associated deficiency. All individuals signed the term of free and clarified consent to participate in this study. Data were analyzed using t- Student Test. Results show that individuals with iron deficiency anaemia show significantly higher activity of SOD and CAT when compared with those from the control group, but they do not show difference in the activity of GPx or GSH. Oxidative damage was also observed in plasma proteins, but not in the cellular hemolysate. Patients with iron deficiency anaemia showed oxidative damage in plasma proteins significantly higher when compared with the control group. And they also showed a significant increase in the production of MDA in the serum as an indicative of the increased auto-oxidation of lipids under oxidative stress. Serum vitamin C levels did not show significant difference between the groups. These data reveal the involvement of the reactive oxygen species in carential anaemia. Therefore, we reinforce the need to diagnose and treat these patients early to reduce the magnitude of the effects of anaemia on the heath of the elderly.

Submitted by Sandro Camargo (sandro.camargo@unipampa.edu.br) on 2015-03-09T02:41:52Z No. of bitstreams: 1 116110008.pdf: 947235 bytes, checksum: 0fc6b0c6b9f1408dc187ce2420690ed3 (MD5) / Made available in DSpace on 2015-03-09T02:41:52Z (GMT). No. of bitstreams: 1 116110008.pdf: 947235 bytes, checksum: 0fc6b0c6b9f1408dc187ce2420690ed3 (MD5) Previous issue date: 2012-12-07 / O ferro é um elemento essencial que participa de várias atividades metabólicas das células. No entanto, acredita-se que o excesso de ferro pode ser uma das principais causas de estresse oxidativo, em sujeitos submetidos à terapia de transfusão de sangue. Assim, o objetivo deste estudo foi determinar os níveis de ferro plasmático e avaliar os marcadores de estresse oxidativo e da atividade das enzimas antioxidantes em indivíduos anêmicos que receberam repetidas transfusões sanguíneas no último ano, em comparação com os controles saudáveis (doadores de sangue). Participaram deste estudo 50 indivíduos multitransfundidos e 20 controles (nenhuma transfusão), divididos em 4 grupos: grupo controle (n = 20); grupo que recebeu até cinco (<5 transfusões) transfusões de sangue (n = 15); grupo que recebeu de cinco a dez (5-10 transfusões) transfusões de sangue (n = 17); grupo que recebeu mais do que 10 (>10 transfusões) transfusões de sangue (n = 18). O conteúdo de ferro plasmático e os marcadores de estresse oxidativo (proteína carbonil, TBARS e DCFH-DA oxidação) foram significativamente mais elevados, enquanto que níveis de total-SH foi significativamente menor nos indivíduos que receberam transfusões de sangue, em comparação aos controles. A atividade das enzimas antioxidantes (SOD, CAT e GPx) estavam significativamente diminuídas nos pacientes multitransfundidos quando comparados aos indivíduos controles. Além disso, encontramos correlações estatisticamente significativas entre o número de transfusões, o teor de ferro plasmático, os marcadores de estresse oxidativo (proteína carbonil, TBARS, e total-SH) e a atividade das enzimas antioxidantes (SOD, CAT, GPx). Em resumo, nossos dados confirmam o envolvimento do estresse oxidativo em pacientes anêmicos após repetidas transfusões de sangue. Além disso, verificou-se que as alterações nos marcadores de estresse oxidativo estão significativamente correlacionados com o conteúdo de ferro e o número de transfusões sanguíneas. / Iron is an essential element that participates in several metabolic activities of cells. However, its excess is believed to be a major cause of iron-induced oxidative stress in subjects undergoing blood transfusion therapy. Thus, the objective this study was to determine the plasmatic iron content and evaluate the oxidative stress markers and the activity of the antioxidant enzymes in anemic subjects receiving repeated blood transfusions in the past year, comparing with healthy controls (blood donors). A total of 50 individuals multitransfused and 20 controls (no transfusion), divided into 4 groups: control group (n=20); group that received up to five (<5 transfusions) blood transfusions (n=15); group that received from five up to ten (5 – 10 transfusions) blood transfusions (n=17); group that received over than ten (>10 transfusions) blood transfusions (n=18). Plasmatic iron and oxidative stress markers (protein carbonyl, TBARS and DCFH-DA oxidation) were significantly higher, whereas total -SH levels was significantly lower in subjects receiving blood transfusion compared to controls. Additionally, the activity of the antioxidant enzymes (CAT, SOD and GPx) were significantly lower in the multitransfused subjects whem compared to controls subjects. Moreover, we found statistically significant correlations between the number of transfusions, the plasmatic iron content, the oxidative stress markers (protein carbonyl, TBARS, and total –SH) and the activity of the antioxidant enzymes (CAT, SOD, and GPx). In summary, our data confirm the involvement of oxidative stress in anemic patients after repeated blood transfusions. Additionally, we found that the changes in the oxidative stress markers are significantly correlated with both iron content and number of blood transfusions.