171 |
Search for the Higgs boson decaying to bottom quarks and W boson tagging techniques at the ATLAS experiment at the LHCBristow, Timothy Michael January 2016 (has links)
The Standard Model of particle physics is currently the most complete theory of subatomic particles. The discovery of the Higgs boson with a mass of 125 GeV in 2012 further validated the Standard Model, providing evidence for the theory that vector bosons obtain non-zero masses through the Higgs mechanism. Studies are ongoing to determine the exact nature and properties of the Higgs boson. A Higgs boson of this mass is predicted to decay to a pair of b-b quarks with a branching ratio of 58%, however this decay mode has not yet been observed. This thesis presents a search for the associated production of a Higgs boson with a leptonically decaying W boson, WH → ℓvb-b, using 20.3 fb-1 of Run 1 data collected by ATLAS at the LHC from pp collisions at a centre-of-mass energy of ps = 8 TeV. The observed (expected) significance of a Higgs boson with a mass of 125 GeV for the WH → ℓvb-b process is found to be 2:7σ (1:3σ). The measured cross section in units of the expected Standard Model cross section has a best-fit value of μ = μ/μSM = 2:2+0:67-0:64(stat:)+0:7-0:59(syst:) = 2:2+0:97-0:87. The results are combined with the search for ZH → v-vb-b and ZH → ℓ+ℓ-b-b to provide a best-fit value of μ = μ/μSM = 1:1+0:61-0:56. The start of Run 2 of the LHC in 2015 saw the collision energy being raised to √s = 13 TeV, increasing the probability of particles being produced with a large momentum boost. At these high energies there is also a possibility to discover new particles and interactions. An extension of the Standard Model, the Heavy Vector Triplet (HVT) model, describes new heavy vector bosons W¹ and Z¹, which can decay to pairs of heavy bosons (W, Z or Higgs bosons). If the W0 and Z0 bosons are sufficiently heavy, the hadronic decays of the diboson final states produce boosted jets. In this thesis, methods for identifying hadronically decaying boosted bosons are developed, based on techniques that examine the internal substructure of the jet. Multiple substructure variables are combined into a single discriminant using two machine learning techniques: boosted decision trees and deep neural networks. Simulated events of W¹→WZ → q-qq-q are used to develop these boosted W boson taggers. An improvement in the background rejection power, whilst keeping 50% of the signal, over previous boosted W boson taggers of up to 13%-when using deep neural networks-and 36%-when using boosted decision trees-is obtained. The performance of the new boosted W boson taggers are evaluated in a search for a narrow WW resonances from the decay of a Z¹ with boson-tagged jets in 3.2 fb-1 of pp collisions at √s = 13 TeV collected with the ATLAS detector.
|
172 |
Measurement Of Differential Photon-jet Cross Section From 7 Tev Pp Collisions In The Cms Experiment At The LhcOcalan, Kadir 01 March 2012 (has links) (PDF)
Prompt photons are produced primarily by quark-gluon compton scattering and quark-anti-quark annihilation mechanisms that their measurements are driven by several motivations at hadron colliders. Measurement of prompt photons can be used for probing perturbative Quantum Chromodynamics (pQCD). Prompt photons are produced in the final states of important decays providing evidence for low mass Higgs boson and new physics searches. Compact Muon Solenoid (CMS) is one of the multi-purpose experiments conducted at the Large Hadron Collider (LHC) to study the Standard Model (SM) physics including prompt photons
and new theories in proton-proton collisions. In this thesis, photon reconstruction is discussed along with the photon identification methods in the CMS experiment. Photon efficiency measurements are presented as an important ingredient for photon+jet cross section measurement.
Photon High Level Trigger (HLT) efficiencies, reconstruction (RECO) efficiencies, and identification (ID) efficiencies are presented that are measured from collision data recorded by the CMS detector and Monte Carlo simulation data. Efficiency corrected differential photon+jet cross section measurement results are presented in this study. The collision data used in this thesis corresponds to 2.2 /fb integrated luminosity collected by the CMS detector at a center-of-mass energy of 7 TeV from 2011 LHC proton-proton collision running.
|
173 |
Search for Supersymmetry in Final States with Leptons with the ATLAS Detector at the Large Hadron ColliderHamer, Matthias 10 May 2013 (has links)
No description available.
|
174 |
Physics with Jets in Association with a Z Boson in pp-collisions with the ATLAS Detector at the Large Hadron ColliderBierwagen, Katharina 19 June 2013 (has links)
Die Arbeit beschreibt die Messung des Wirkungsquerschnittes für die Produktion von Jets in Ereignissen mit Z-Bosonen in Proton-Proton Kollisionen bei einer Schwerpunktsenergie von √s = 7 TeV mit einer integrierten Luminosität von ∫Ldt = 36 pb−1 und ∫Ldt = 4.6 fb−1 aufgenommen mit dem ATLAS Experiment am Large Hadron Collider in Genf. Die inklusiven und differenziellen Wirkungsquerschnitte für Z (→ e+ e−) + jets werden für Jets mit einem Transversalimpuls von pT(jet) > 30 GeV und einer Rapidität von |y(jet)| < 4.4 gemessen. Die Datensätze erlauben Messungen in vorher nicht zugänglichen Phasenraumregionen und können genutzt werden, um die Modellierungen von Z/γ∗ + jets in typischen Phasenraumregionen, die vom Zerfall des Higgs Bosons oder Suchen nach neuer Physik erwarten werden, zu testen. Die Ergebnisse werden auf Partonlevel entfaltet und mit Vorhersagen verschiedener Monte-Carlo Generatoren und Vorhersagen der perturbativen QCD in nächst-führender Ordnung verglichen.
|
175 |
Prospects for probing the structure of the proton with low-mass Drell-Yan events in ATLASInce, Tayfun 17 November 2010 (has links)
The biggest scientific experiment in history will begin taking data in late 2009 using the
Large Hadron Collider (LHC) at CERN near Geneva, Switzerland. The LHC is designed to
collide protons at an unprecedented 14 TeV centre of mass energy, enabling physicists to explore the constituents of matter at smaller scales than ever before. The Parton Distribution Functions (PDFs) are parametrizations of the proton structure and are best determined from experimental data. The PDFs are needed to calculate cross-sections or in other words the likelihood of observed physical processes, which are crucial in exploiting the discovery
potential of the LHC. The prospects for measuring the Drell-Yan (DY) spectrum are
assessed in the low invariant mass region below the Z boson resonance using e+e− pairs
from the initial LHC data in order to probe the proton structure and further constrain the PDFs. The analysis is based on the full simulation of the ATLAS detector response to DY electrons and background processes. Assuming 100 pb−1 of LHC data, the total DY crosssection in the invariant mass range from 10 GeV to 60 GeV is expected to be measured as DY = 5.90±0.24(stat)±0.18(syst) nb. The result predicts an improvement over a current theoretical uncertainty of 7.6% and indicates that the PDF uncertainties can be reduced significantly with the early LHC data.
|
176 |
Accounting for jet response induced MET backgrounds to new physics at the ATLAS experiment at CERN’s LHCCourneyea, Lorraine 01 September 2011 (has links)
Detector mis-modelling or hardware problems may cause an excess of Missing Transverse Energy (MET) to be inferred in physics events recorded in ATLAS, leading to higher than expected backgrounds for new physics. In particular, non-Gaussian tails in the MET distribution are unlikely to be well modelled in Monte Carlo simulations. To account for this, a technique has been established to improve the background predictions derived from Monte Carlo simulations. This is done using a correction derived through comparison of control samples in data and Monte Carlo simulation. Two different control samples are used to create the correction, giving a range of predictions for the shape of the MET tail and aiding the calculation of systematic errors. This technique is then applied to several samples which are potential backgrounds to new physics which give detector signatures which include MET. / Graduate
|
177 |
Signals of new physics at the LHC and colliders of future generationNavarro, Roy Daniel Alva January 2016 (has links)
Orientador: Prof. Dr. José Kenichi Mizukoshi / Tese (doutorado) - Universidade Federal do ABC, Programa de Pós-Graduação em Física, 2016. / Searches for new physics beyond the Standard Model are important subjects at the current
Run-2 of the Large Hadron Collider (LHC) and next generation colliders. In this context,
we make independent studies of the phenomenology of a new hypothetical heavy Majorana
neutrino (N) and a heavy spin-1 charged vector (W¿) at the LHC and a future 100 TeV very
large hadron collider (VLHC), we also study the potential of the future International Linear
Collider (ILC) to measure the rare h !
Z Higgs decay. Toward this end, the N production
via the W
fusion process is investigated and found it to be larger than the Drell-Yan
production for mN > 1 TeV at the 14 TeV LHC and for mN > 770 GeV at the 100 TeV
VLHC. Then we computed the discovery potential of the these colliders to discover an N
using the same-sign dimuon channel. In the case of the h !
Z Higgs decay we investigated
the Higgsstrahlung production at the 250 GeV ILC, we found that a sensitivity of 58% can
be reached in the inclusive ¿Ê¿Ê
X channel with 3 ab.1, where X denotes the inclusive decay
of the Z boson from the Higgs. Finally, in the case of the W¿, we studied its contribution
to the h !
Higgs decay process and constrained the strength of the W¿W¿h interaction.
Finally, we study the Drell-Yan W¿ production with its decay to the Wh pair at the LHC.
|
178 |
Measurement of jet production in association with a Z boson at the LHC and jet energy correction calibration at high level trigger in CMSZhang, Fengwangdong 08 June 2017 (has links)
This PhD dissertation presents the measurement of the cross section of jet production in association with a Z boson in proton-proton collisions at the Large Hadron Collider in CERN, with a center-of-mass energy of 8 TeV in 2012 and of 13 TeV in 2015. The data used for this analysis were collected by the Compact Muon Solenoid (CMS) detector, with an integrated luminosity of 19.6 fb-1 in 2012 and of 2.25 fb-1 in 2015. The differential cross section is measured as a function of jet multiplicity, jet transverse momentum and rapidity, and the scalar sum of jet transverse momenta. The rapidity correlations between the Z boson and jets are also measured benefiting from the large statistics of data taken in 2012. All distributions of measured observables are obtained after correcting detector effects using unfolding approach, and the results of two leptonic decaying channels of Z boson are combined. Coming along with the systematic and statistical uncertainties, the measurement is compared to different theoretical predictions at different accuracy levels. The predictions are from MADGRAPH 5, SHERPA 2 (for 8 TeV analysis only), MADGRAPH_AMC@NLO, and fixed next-to-next-to-leading order (for 13 TeV analysis only). Thanks to the unprecedented high energy and the large statistics of data, precision measurement is accomplished in a physical phase space never reached before. This measurement provides precise systematics for different theoretical models. It also quantifies the improvement with higher order of perturbative quantum chromodynamics calculations on matrix elements relative to the leading order multi-leg approach. In particular to the rapidity correlation study, new matching schemes (FxFx and MEPS@NLO) for next-to-leading order matrix elements and parton shower show significant improvements with respect to the MLM matching scheme for leading order multi-leg matrix elements and parton shower. This measurement also gives precise background estimation for the measurements of many other processes in Standard Model like top quark production and gauge boson couplings, and for new physics searches such as Supersymmetry. In this thesis, the jet energy correction and calibration for the high level trigger system of CMS are also depicted. From 2012 to 2015, the Large Hadron Collider was upgraded, not only with the center-of-mass energy of the beams enlarged, but also with the instantaneous luminosity increased. The time distance between two particle bunches in a beam is reduced. As a result, the reconstructed momenta of the jets produced in each bunch crossing are significantly contaminated by multiple interactions. A dedicated technical approach has been developed for correcting the reconstructed jet momenta. The corrections have been calibrated and configured for the data taking in 2015 and 2016. / Cette thèse présente une mesure de la section efficace de production de jets associés à un boson Z dans les collisions proton-proton du Grand Collisionneur de Hadron (LHC) situé au CERN, avec des énergies dans le centre de masse de 8 TeV et 13 TeV, respectivement pour les années 2012 et 2015. Les données utilisées pour cette analyse ont été collectées par le détecteur Compact Muon Solenoid (CMS). Elles constituent des échantillons de luminosités intégrées de 19.6 fb⁻¹ et 2.25 fb⁻¹, respectivement pour 2012 et 2015. Nous mesurons la section efficace différentielle en fonction de la multiplicité de jets, de l’impulsion transverse et de la rapidité des jets, et en fonction de la somme scalaire des impulsions transverses des jets. La corrélation entre les rapidités du boson Z et des jets est aussi mesurée et bénéficie de la large statistique prise en 2012. Toutes les distributions d’observables mesurées sont obtenues après corrections pour les effets détecteurs et les résultats des canaux de désintégration muonique et électronique du boson Z sont combinés. Tenant compte des incertitudes statistiques et systématiques, les mesures sont comparées à différentes prédictions théoriques ayant différents niveaux de précision. Les prédictions sont obtenues de MADGRAPH 5, SHERPA 2 (pour l’analyse à 8 TeV uniquement), MADGRAPH_AMC@NLO, et un modèle fixé au NNLO (pour l’analyse à 13 TeV uniquement). Par ces mesures de précisions, et en particulier celle de la corrélation de rapidités, nous avons acquis une compréhension plus approfondie de la chromodynamique quantique dans son régime perturbatif. Grâce à la plus haute énergie jamais atteinte en laboratoire, et à la grande statistique disponible, nous avons sondé avec précision des endroits de l’espace des phases jusque là inaccessibles.Dans cette thèse, les corrections et la calibration de l’énergie des jets pour le haut niveau de sélection de CMS est également présentée. Durant la période de 2012 à 2015, le LHC a été amélioré, non seulement l’énergie dans le centre de masse a augmenté, mais la luminosité instantanée a aussi été amplifiée. L’écart temporelle entre deux paquets de particules dans les faisceaux du LHC a été réduite. L’une des conséquences est que l’impulsion reconstruite pour les jets produits lors d’un croisement de faisceau à une contribution significative venant des multiples interactions ayant lieux lors du croisement des paquets. Une approche technique dédiée a été développée pour corriger l'impulsion des jets. Les corrections obtenues ont été calibrées aux données prises en 2015 et 2016. / Doctorat en Sciences / info:eu-repo/semantics/nonPublished
|
179 |
Etude de la production de jets en diffraction à HERA, à l'aide du spectromètre à protons VFPS / Study of jet production in diffraction at HERA with the VFPSDelvax, Julie 24 September 2010 (has links)
Ce travail consiste en l'étude des événements diffractifs avec production de jets pour lesquels le proton diffusé est détecté dans le spectromètre à protons, VFPS, au sein de l'expérience H1 auprès du collisionneur HERA.<p><p>L'objectif est de mesurer la section efficace de ce processus et de la confronter aux prédictions théoriques de la Chromo Dynamique Quantique (QCD). Ces prédictions reposent sur le théorème de factorisation collinéaire, via l'universalité des densités de partons (PDF).<p><p>Les analyses précédentes de la Collaboration H1 ont montré un bon accord entre les données et les prédictions dans le domaine de l'électro-production supportant la factorisation. Cependant, en photo-production, une brisure de la factorisation a été observée.<p><p>Dans ce travail, le nouveau spectromètre à protons VFPS a été utilisé afin de détecter le proton diffusé lors de l'interaction diffractive, permettant de supprimer le bruit de fond dominant dans les mesures précédentes et de réduire d'autres sources d'incertitudes expérimentales.<p><p><p>La section efficace de production de jets dans le domaine de l'électro-production est extraite et comparée aux prédictions QCD au NLO. Ces prédictions sont basées sur les fonctions de distribution de partons (PDF) extraites des mesures antérieures par la Collaboration H1.<p><p>Les sections efficaces obtenues dans ce travail sont en accord tant d'un point de la normalisation que de celui de la dépendance en les différentes variables cinématiques avec les prédictions théoriques.<p><p>Nous pouvons en conclure l'universalité des PDF telle que prédite par le théorème de factorisation. De plus, l'analyse des sections efficaces différentielles permet de montrer que les prédictions basées sur des PDF extraites à partir d'une combinaison de mesures en diffraction inclusive et de production de jets semble être favorisée.<p><p>La production de jets en diffraction dans le domaine de la photo-production est également étudiée dans cette thèse. On y traite de la mise en place d'un nouveau sous-déclencheur permettant de sauvegarder les données sur banques. Les données en photo-production ont été comparées aux données simulées par un programme par Monte Carlo. Le bon accord entre les deux échantillons permet de s'assurer que les différents effets détecteurs ont été correctement pris en compte et montre que la mesure de la section efficace est faisable.<p> / Doctorat en Sciences / info:eu-repo/semantics/nonPublished
|
180 |
Calibration of b-tagging and search for Dark Matter : Calibration of b-tagging efficiency and search for Dark Matter production in association with heavy flavour quarks with the ATLAS experimentShcherbakova, Anna January 2017 (has links)
The Large Hadron Collider (LHC) is the most powerful and complex particle accelerator ever built. The ATLAS and the CMS are the two multipurpose particle detectors at the LHC, designed to cover a wide range of physics measurements. Three physics studies performed using data of proton-proton collisions collected with the ATLAS detector are presented. The identification of jets originating from b quarks, also known as b-tagging, is a crucial tool for many physics analyses at the LHC. This thesis presents a calibration of the b-tagging efficiency for high transverse momentum jets using a new calibration technique. This analysis is based on template fits and uses multi-jet events, which allows to perform the calibration for jets with transverse momenta up to 1200 GeV. This thesis also describes a completed and connected technical project on the development of the b-tagging ATLAS software. Dark Matter (DM) is a new phenomenon introduced to explain astrophysical observations. The nature of DM is one of the most important subjects of investigations in the modern physics, and many of these investigations are carried out at the LHC. A search for DM production in association with a pair of heavy flavour quarks has been recently performed in ATLAS at a centre-of-mass energy √s = 8 TeV under the Effective Field Theory approach. A re-interpretation of the results of this search under assumption of the simplified models is presented. A set of simplified models is considered with various DM masses, masses of the spin-0 exchange particle, that mediates the interaction between DM and the regular matter, and various values of couplings. Benchmark models are chosen to be used in the DM searches at √s = 13 TeV. The last part of the thesis presents a search for DM production in association with a pair of top quarks performed under assumption of the simplified models with spin-0 mediator, using the data collected at a centre-of-mass energy √s = 13 TeV. The observed data are shown to be in good agreement with the Standard Model predictions, and upper limits are set on a ratio between the observed DM production cross section and the value expected by the simplified model.
|
Page generated in 0.0687 seconds