Spelling suggestions: "subject:"convection"" "subject:"convectif""
1 |
Otopné systémy v předškolních zařízeních / Heating systems in preschoolsSchäferová, Hana January 2012 (has links)
The topic of a master thesis is solution of infant’s school heating. The thesis summarizes state of art infant’s school heating from practical and legislative point of view. The thesis contains solution of infant’s school heating created by author of thesis. In addition, the thesis contains an experiment which is focused on examination of heat output from cover radiator.
|
2 |
Dynamika otopných ploch / Dynamics of heating surfaces behaviorOravec, Jakub January 2019 (has links)
The diploma thesis is focused on the research of dynamics of selected heating surfaces behavior. The aim of the thesis is to determine the dynamics of heating and cooling and to determine the effect of these characteristics on energy consumption of the building. The project part deals with the design of a heating solution for a residential building in three variants. An Energetic simulation is made for the designed variants, that compares the consumption of thermal energy during one year. The next simulation research the dynamics of selected large-scale heating surfaces. For each construction, nonstationary models of heating up and cooling were made, which are compared in terms of the thermal inertia.
|
3 |
Filling flows induced by a convector in a roomPrzydrozna, Aleksandra Anna January 2018 (has links)
Over the last two centuries, there has been a continual evolution of how occupied rooms are heated, with inventors competing to design new heating devices. In particular, there is a wide range of convector types, which vary in shape, size, design, material, operating medium and application. With approximately 190 million convectors installed in the UK alone, the question arises regarding the dependencies on the efficiency of heat distribution through convector-induced filling flows. A standard approach to evaluate convector performance is based on the convector strength only, the implication being the stronger the convector the better the performance. This work has gone beyond the limits of a stereotypical assessment in pursuit of answers regarding the physics of convector-induced filling and a new objective method to evaluate the efficiency of this transient process. The ultimate goal has been to provide a deep understanding of filling and stratification induced by a convector, in order to heat rooms rapidly and effectively. An experimental facility has been designed that approximates dynamic similarity between the experimental set-up and a real-life room with a convector. In the experiments, a rectangular sectioned water tank represents a room and a saline source rectangular sectioned panel with sintered side walls provides a convector representation. Experiments have been performed in water with a saline solution to ensure high Rayleigh numbers. Diagnostic techniques involve a combination of a shadowgraph method, a dye-attenuation method, direct salinity measurements and a new application of Particle Image Velocimetry (PIV). Interesting insight into convector-induced buoyancy-driven flows has been gained. As a result, new guidelines aimed at heating rooms more rapidly and effectively have been proposed. The key outcome that can be immediately applied is that, for a given convector strength, heat distribution with height can be improved by adjusting the convector position. For instance, faster filling leading to more uniform heat distribution occurs in rooms with convectors detached from side walls, due to large-scale mixing flows in the early period of filling. Also shorter convectors relative to the room height, positioned close to the floor level, promote faster and more uniform filling. An attempt to describe the transient filling has been made and to do so statistical methods, application specific, have been developed. As a result, the empirical equations describing both the filling rates in different stages of filling and the development of stratification have been derived, which rank the governing parameters, based on their importance, as either dominant or subordinate. Two dominant parameters governing filling flows are the non-dimensional accumulation parameter B and the Rayleigh number ΔRa, which are related to the convector strength. The impact of these two parameters is constant throughout the process. The parameters accounting for the system geometry and filling time (T) are subordinate parameters. Their impact, visible in the early period, decreases as filling continues.
|
4 |
Komíny s přirozeným tahem a připojování spotřebičů paliv / Chimneys draft and connecting fuel appliancesKupka, Filip January 2012 (has links)
Diploma thesis deals with problematics of offtake of flue gasses. In experimental part there was measured compound of flue gasses by analyzator of flue gates. Aplication is a project of heating of object of The Academy of Sciences of the Czech Republic in Brno. Project solves design of heating system, flue and of source of heat. Heating area is created by floor convectors,towel rails and radiators. Source of heat is designed in two variants : as a cascade of condensation boilers and as a cascade of low-temperature boilers.
|
5 |
Vytápění bytového domu / Heating of flat houseJára, Marek January 2020 (has links)
The theme of this diploma thesis is to design heating of the flat house. The theoretical part of this diploma thesis is about exhaust gases paths. The calculation part of this diploma thesis contains the design of the heating system by panel heaters, floor convectors and underfloor heating system. The heat source is the system of cascade-connected gas condensing boilers. The rest of this part are the calculations of the preparation of hot water, design of hot water storage tank and another necessary equipment of the system. The part Project is about technical report and simulation of behaviour of underfloor heating system in various marginal conditions.
|
Page generated in 0.0585 seconds