Spelling suggestions: "subject:"core modeling""
1 |
Minimizing uncertainty in cure modeling for composites manufacturingDykeman, Donna 05 1900 (has links)
The degree of cure and temperature are consistent variables used in models to describe the state of material behaviour development for a thermoset during cure. Therefore, the validity of a cure kinetics model is an underlying concern when combining several material models to describe a part forming process, as is the case for process modeling. The goals of this work are to identify sources of uncertainty in the decision-making process from cure measurement by differential scanning calorimeter (DSC) to cure kinetics modeling, and to recommend practices for reducing uncertainty.
Variability of cure kinetics model predictions based on DSC measurements are investigated in this work by a study on the carbon-fiber-reinforced-plastic (CFRP) T800H/3900-2, an interlaboratory Round Robin comparison of cure studies on T800H/3900-2, and a literature review of cure models for Hexcel 8552. It is shown that variability between model predictions can be as large as 50% for some process conditions when uncertainty goes unchecked for decisions of instrument quality, material consistency, measurement quality, data reduction and modeling practices. The variability decreases to 10% when all of the above decisions are identical except for the data reduction and modeling practices.
In this work, recommendations are offered for the following practices: baseline selection, balancing heats of reaction, comparing data over an extensive temperature range (300 K), choosing appropriate models to describe a wide range of behaviour, testing model reliability, and visualization techniques for cure cycle selection. Specific insight is offered to the data reduction and analysis of thermoplastic-toughened systems which undergo phase separation during cure, as is the case for T800H/3900-2. The evidence of phase separation is a history-dependent Tg-α relationship. In the absence of a concise outline of best practices for cure measurement by DSC and modeling of complex materials, a list of guidelines based on the literature and the studies herein is proposed.
|
2 |
Minimizing uncertainty in cure modeling for composites manufacturingDykeman, Donna 05 1900 (has links)
The degree of cure and temperature are consistent variables used in models to describe the state of material behaviour development for a thermoset during cure. Therefore, the validity of a cure kinetics model is an underlying concern when combining several material models to describe a part forming process, as is the case for process modeling. The goals of this work are to identify sources of uncertainty in the decision-making process from cure measurement by differential scanning calorimeter (DSC) to cure kinetics modeling, and to recommend practices for reducing uncertainty.
Variability of cure kinetics model predictions based on DSC measurements are investigated in this work by a study on the carbon-fiber-reinforced-plastic (CFRP) T800H/3900-2, an interlaboratory Round Robin comparison of cure studies on T800H/3900-2, and a literature review of cure models for Hexcel 8552. It is shown that variability between model predictions can be as large as 50% for some process conditions when uncertainty goes unchecked for decisions of instrument quality, material consistency, measurement quality, data reduction and modeling practices. The variability decreases to 10% when all of the above decisions are identical except for the data reduction and modeling practices.
In this work, recommendations are offered for the following practices: baseline selection, balancing heats of reaction, comparing data over an extensive temperature range (300 K), choosing appropriate models to describe a wide range of behaviour, testing model reliability, and visualization techniques for cure cycle selection. Specific insight is offered to the data reduction and analysis of thermoplastic-toughened systems which undergo phase separation during cure, as is the case for T800H/3900-2. The evidence of phase separation is a history-dependent Tg-α relationship. In the absence of a concise outline of best practices for cure measurement by DSC and modeling of complex materials, a list of guidelines based on the literature and the studies herein is proposed.
|
3 |
Minimizing uncertainty in cure modeling for composites manufacturingDykeman, Donna 05 1900 (has links)
The degree of cure and temperature are consistent variables used in models to describe the state of material behaviour development for a thermoset during cure. Therefore, the validity of a cure kinetics model is an underlying concern when combining several material models to describe a part forming process, as is the case for process modeling. The goals of this work are to identify sources of uncertainty in the decision-making process from cure measurement by differential scanning calorimeter (DSC) to cure kinetics modeling, and to recommend practices for reducing uncertainty.
Variability of cure kinetics model predictions based on DSC measurements are investigated in this work by a study on the carbon-fiber-reinforced-plastic (CFRP) T800H/3900-2, an interlaboratory Round Robin comparison of cure studies on T800H/3900-2, and a literature review of cure models for Hexcel 8552. It is shown that variability between model predictions can be as large as 50% for some process conditions when uncertainty goes unchecked for decisions of instrument quality, material consistency, measurement quality, data reduction and modeling practices. The variability decreases to 10% when all of the above decisions are identical except for the data reduction and modeling practices.
In this work, recommendations are offered for the following practices: baseline selection, balancing heats of reaction, comparing data over an extensive temperature range (300 K), choosing appropriate models to describe a wide range of behaviour, testing model reliability, and visualization techniques for cure cycle selection. Specific insight is offered to the data reduction and analysis of thermoplastic-toughened systems which undergo phase separation during cure, as is the case for T800H/3900-2. The evidence of phase separation is a history-dependent Tg-α relationship. In the absence of a concise outline of best practices for cure measurement by DSC and modeling of complex materials, a list of guidelines based on the literature and the studies herein is proposed. / Applied Science, Faculty of / Materials Engineering, Department of / Graduate
|
4 |
Stereolithography Characterization for Surface Finish Improvement: Inverse Design Methods for Process PlanningSager, Benay 11 April 2006 (has links)
To facilitate the transition of Stereolithography (SLA) into the manufacturing domain and to increase its appeal to the micro manufacturing industry, process repeatability and surface finish need to be improved. Researchers have mostly focused on improving SLA surface finish within the capabilities of commercially available SLA machines. The capabilities of these machines are limited and a machine-specific approach for improving surface finish is based purely on empirical data. In order to improve surface finish of the SLA process, a more systematic approach that will incorporate process parameters is needed. To achieve this, the contribution of different laser and process parameters, such as laser beam angle, irradiance distribution, and scan speed, to SLA resolution and indirectly to surface finish, need to be quantified and incorporated into an analytical model.
In response, a dynamic analytical SLA cure model has been developed. This model has been applied to SLA geometries of interest. Using flat surfaces, the efficacy of the model has been computationally and experimentally demonstrated. The model has been applied to process planning as a computational inverse design method by using parameter estimation techniques, where surface finish improvement on slanted surfaces has been achieved. The efficacy of this model and its improvement over the traditional cure models has been demonstrated computationally and experimentally. Based on the experimental results, use of the analytical model in process planning achieves an order of magnitude improvement in surface roughness average of SLA parts. The intellectual contributions of this research are the development of an analytical SLA cure model and the application of this model to process planning along with inverse design techniques for parameter estimation and subsequent surface finish improvement.
|
Page generated in 0.0592 seconds