Master’s thesis submit a concept for belt drive cover manufactured by ČSN 411320.21, a 1.5 mm thick material for series 10 000 pieces. On the basis of manufacturing method are presented problems around drawing, the parameters, used machine with tool design. For deep drawing operations were carried out control, computing technology, a hydraulic pres CTH 250 selection, designed set of drawing tools, simulation by AutoForm software, a technical economic evaluation, break-even point and supported by drawing documentation.

Graduation theses project elaborated within the scope of full-time study with specialization 23037002 submits the proposal of manufacture technologies for irrregularly formed component with flange by surface forming. Material is made from rust-resistant metal plate 17240 with 1mm thickness. Expected annual serie is 50.000pcs. Based on literary pilot project for deep hauling dilemma and its calculations was proposed hauling in instrument with blankholder. The hauling operation is done using hydraulic presser ZH 50 with rated power of 500kN. The drawing instruments are made from tool steel 19573 and heat treated according design doccumentation. The proposal of drawing versions was verified by simulation program Pam-Stamp.