31 |
Defect microstructures of ZnO-dissolved/exsolved TiO2 and early stage sintering of nanosized TiO2Chen, Zi-rong 22 July 2007 (has links)
none
|
32 |
Defect site prediction based upon statistical analysis of fault signaturesTrinka, Michael Robert 30 September 2004 (has links)
Good failure analysis is the ability to determine the site of a circuit defect quickly and accurately. We propose a method for defect site prediction that is based on a site's probability of excitation, making no assumptions about the type of defect being analyzed. We do this by analyzing fault signatures and comparing them to the defect signature. We use this information to construct an ordered list of sites that are likely to be the site of the defect.
|
33 |
Optimal use of computing equipment in an automated industrial inspection contextJubb, Matthew James January 1995 (has links)
This thesis deals with automatic defect detection. The objective was to develop the techniques required by a small manufacturing business to make cost-efficient use of inspection technology. In our work on inspection techniques we discuss image acquisition and the choice between custom and general-purpose processing hardware. We examine the classes of general-purpose computer available and study popular operating systems in detail. We highlight the advantages of a hybrid system interconnected via a local area network and develop a sophisticated suite of image-processing software based on it. We quantitatively study the performance of elements of the TCP/IP networking protocol suite and comment on appropriate protocol selection for parallel distributed applications. We implement our own distributed application based on these findings. In our work on inspection algorithms we investigate the potential uses of iterated function series and Fourier transform operators when preprocessing images of defects in aluminium plate acquired using a linescan camera. We employ a multi-layer perceptron neural network trained by backpropagation as a classifier. We examine the effect on the training process of the number of nodes in the hidden layer and the ability of the network to identify faults in images of aluminium plate. We investigate techniques for introducing positional independence into the network's behaviour. We analyse the pattern of weights induced in the network after training in order to gain insight into the logic of its internal representation. We conclude that the backpropagation training process is sufficiently computationally intensive so as to present a real barrier to further development in practical neural network techniques and seek ways to achieve a speed-up. Weconsider the training process as a search problem and arrive at a process involving multiple, parallel search "vectors" and aspects of genetic algorithms. We implement the system as the mentioned distributed application and comment on its performance.
|
34 |
The Incidence of Speech Defects among Juveniles Exhibiting Antisocial Aggressive BehaviorAnderson, Samantha G. 01 1900 (has links)
The question of maladjustment of individuals with speech defects and its subsequent manifestation is the basic issue of this thesis. The study was conducted to answer the question: "What is the incidence of speech defects among juveniles exhibiting antisocial aggressive behavior?"
|
35 |
Analog Fault Modeling, Simulation and DiagnosisJanuary 2014 (has links)
abstract: The research objective is fully differential op-amp with common mode feedback, which are applied in filter, band gap, Analog Digital Converter (ADC) and so on as a fundamental component in analog circuit. Having modeled various defect and analyzed corresponding probability, defect library could be built after reduced defect simulation.Based on the resolution of microscope scan tool, all these defects are categorized into four groups of defects by both function and location, bias circuit defect, first stage amplifier defect, output stage defect and common mode feedback defect, separately. Each fault result is attributed to one of these four region defects.Therefore, analog testing algorithm and automotive tool could be generated to assist testing engineers to meet the demand of large numbers of chips. / Dissertation/Thesis / M.S. Electrical Engineering 2014
|
36 |
Empirical evaluation of defect identification indicators and defect prediction models / Empirical evaluation of defect identification indicators and defect prediction modelsTran, Qui Can Cuong January 2012 (has links)
Context. Quality assurance plays a vital role in the software engineering development process. It can be considered as one of the activities, to observe the execution of software project to validate if it behaves as expected or not. Quality assurance activities contribute to the success of software project by reducing the risks of software’s quality. Accurate planning, launching and controlling quality assurance activities on time can help to improve the performance of software projects. However, quality assurance activities also consume time and cost. One of the reasons is that they may not focus on the potential defect-prone area. In some of the latest and more accurate findings, researchers suggested that quality assurance activities should focus on the scope that may have the potential of defect; and defect predictors should be used to support them in order to save time and cost. Many available models recommend that the project’s history information be used as defect indicator to predict the number of defects in the software project. Objectives. In this thesis, new models are defined to predict the number of defects in the classes of single software systems. In addition, the new models are built based on the combination of product metrics as defect predictors. Methods. In the systematic review a number of article sources are used, including IEEE Xplore, ACM Digital Library, and Springer Link, in order to find the existing models related to the topic. In this context, open source projects are used as training sets to extract information about occurred defects and the system evolution. The training data is then used for the definition of the prediction models. Afterwards, the defined models are applied on other systems that provide test data, so information that was not used for the training of the models; to validate the accuracy and correctness of the models Results. Two models are built. One model is built to predict the number of defects of one class. One model is built to predict whether one class contains bug or no bug.. Conclusions. The proposed models are the combination of product metrics as defect predictors that can be used either to predict the number of defects of one class or to predict if one class contains bugs or no bugs. This combination of product metrics as defect predictors can improve the accuracy of defect prediction and quality assurance activities; by giving hints on potential defect prone classes before defect search activities will be performed. Therefore, it can improve the software development and quality assurance in terms of time and cost
|
37 |
Calculation of Phonon Frequencies and Widths in Cu0.97A0.03 AlloyHampson, Daniel Patrick 09 1900 (has links)
<p> The mean square displacement spectrum of a single mass defect and that of its neighbours is examined for both a light and a heavy defect to observe the extent of the perturbation of the pure crystal. </p> <p> Nearest neighbour force constant changes for a 3% random distribution of gold defects in a copper host are calculated by fitting to experimental elastic constants for this alloy. The phonon shifts and widths are calculated for the system with various sets of force constant changes, and comparison is made with experiment. </p> / Thesis / Master of Science (MSc)
|
38 |
Automatic surface defect quantification in 3DTailor, Mitul January 2013 (has links)
Three-dimensional (3D) non-contact optical methods for surface inspection are of significant interest to many industrial sectors. Many aspects of manufacturing processes have become fully automated resulting in high production volumes. However, this is not necessarily the case for surface defect inspection. Existing human visual analysis of surface defects is qualitative and subject to varying interpretation. Automated 3D non-contact analysis should provide a robust and systematic quantitative approach. However, different 3D optical measurement technologies use different physical principles, interact with surfaces and defects in diverse ways, leading to variation in measurement data. Instrument s native software processing of the data may be non-traceable in nature, leading to significant uncertainty about data quantisation. Sub-millimetric level surface defect artefacts have been created using Rockwell and Vickers hardness testing equipment on various substrates. Four different non-contact surface measurement instruments (Alicona InfiniteFocus G4, Zygo NewView 5000, GFM MikroCAD Lite and Heliotis H3) have been utilized to measure different defect artefacts. The four different 3D optical instruments are evaluated by calibrated step-height created using slipgauges and reference defect artefacts. The experimental results are compared to select the most suitable instrument capable of measuring surface defects in robust manner. This research has identified a need for an automatic tool to quantify surface defect and thus a mathematical solution has been implemented for automatic defect detection and quantification (depth, area and volume) in 3D. A simulated defect softgauge with a known geometry has been developed in order to verify the implemented algorithm and provide mathematical traceability. The implemented algorithm has been identified as a traceable, highly repeatable, and high speed solution to quantify surface defect in 3D. Various industrial components with suspicious features and solder joints on PCB are measured and quantified in order to demonstrate applicability.
|
39 |
Numerical models for Rayleigh wave scattering from surface featuresBlake, Richard John January 1988 (has links)
No description available.
|
40 |
The integration of innovative vision and graphic modelling techniques for surface inspectionSmith, Melvyn Lionel January 1998 (has links)
No description available.
|
Page generated in 0.0247 seconds