1 |
A Charge-Balancing Incremental Analog to Digital Converter for Instrumental ApplicationsZrilić, D., Skendzić, D., Pajavić, S., Ghorishi, R., Fu, F., Kandus, G. 10 1900 (has links)
International Telemetering Conference Proceedings / October 17-20, 1988 / Riviera Hotel, Las Vegas, Nevada / A switched-capacitor technique for realization of one bit serial A/D converter is presented. A conversion accuracy that is higher than 15 bits can be expected from its integrated realization. Results of simulation are presented. It is shown that arithmetic operations on bit serial signals are possible. Using arithmetic operations on delta-modulated signals, it is possible to build inexpensive options necessary in instrumentation.
|
2 |
Modulateur ΣΔ passe-haut et application dans la réception multistandardsKhushk, Hasham Ahmed 27 November 2009 (has links) (PDF)
Dans cette thèse, les recherches ont été menées à des niveaux d'abstraction différents pour optimiser le fonctionnement du modulateur ΣΔ passe-haut (PH). Une approche « top-down » est adoptée pour atteindre cet objectif. Au niveau de l'architecture du récepteur RF, le nouvellement créé récepteur Fs/2 est sélectionné pour sa grande compatibilité avec modulateur ΣΔ PH comparé aux architectures de réception: zéro-IF et faible-IF. Après avoir défini la topologie du récepteur, l'architecture du modulateur ΣΔ est adressée. Nous proposons une nouvelle architecture du deuxième ordre dont la fonction de transfert du signal est unitaire. Elle est plus avantageuse que d'autres topologies en termes de complexité et de performance. Puisque le modulateur de second ordre est incapable de fournir les performances requises, les structures en cascade ou MASH pour l'opération PH sont explorées. La topologie GMSCL (Generalized Multi-Stage Closed Loop) est choisie et une technique récemment proposée est appliquée pour linéariser le CNA de retour. En plus, cette technique augmente la plage dynamique du convertisseur. Ensuite, après une analyse comparative approfondie, le meilleur filtre HP est choisie pour ce modulateur. Il a les avantages d'avoir une basse consommation, une superficie réduite et un bruit moins important. Enfin, l'architecture GMSCL PH proposée est validée en CMOS 65nm. Les applications visées sont l'UMTS avec 3.84MHz bande de conversion à 80 dB de la plage dynamique et WiMAX avec 25MHz de bande passante à 52dB de dynamique.
|
3 |
Delta-Sigma Modulation Applied to Switching RF Power AmplifiersAndersson, Tobias, Wahlsten, Johan January 2007 (has links)
<p>Background:</p><p>The task of this thesis is to investigate the possibility of using non-linear high efficiency switching power amplifiers with spectrally efficient varying envelope modulation schemes and, if possible, further investigate such a solution on a high level.</p><p>The thesis focuses on the theory necessary to understand the technical issues related to power amplifiers and the procedures behind simulating and measuring the characteristics of different power amplifier configurations. The thesis also covers basic theory behind Delta-Sigma-modulators. The theory is needed to draw conclusions about the feasibility of using a Delta-Sigma-modulator as input to a switching amplifier.</p><p>Results:</p><p>Using a Delta-Sigma-modulated input to a switching amplifier inherently degrades the performance, mainly because of poor coding efficiency and high switching activity. However, by merely using a switching amplifier as a mixer it is shown to be possible to transmit a non-constant envelope signal, with digital logic. The resulting circuit is, however, not an amplifier and it should not be seen as the final result. As already mentioned: the result lies in the investigation of a using Delta-Sigma-modulator as input to a switching amplifier.</p><p>Conclusion:</p><p>From this investigation we believe that the widely known technique: pulse width modulation (PWM), together with a tuned switching amplifier and some linearization technique, for example pre-distortion, is a better way to go. Much effort should be put in understanding the fundamental limits and possibilities of an efficient tuned switching power amplifier.</p>
|
4 |
Wideband GFSK-Modulated Frequency Synthesizer Using Two-Point Delta-Sigma ModulationPeng, Kang-Chun 03 May 2005 (has links)
This dissertation presents a 2.4 GHz wideband GFSK-modulated frequency synthesizer using two-point delta-sigma modulation (TPDSM). The two bottlenecks in this design have been rigorously investigated. One bottleneck is the nonlinear performance of the phase-locked loop (PLL). The other one is the inherent gain and delay mismatch between the two modulation points. Both nonlinear and mismatch factors dominate the modulation accuracy in the closed PLL. The proposed formulation can successfully predict the dependencies of the modulation accuracy on both factors. The comparison of the averaged frequency deviation and frequency-shift -keying (FSK) error between theory and measurement shows excellent agreement. The modulated frequency synthesizer implemented in this study can achieve a 2.5 Mbps data rate as well as a 15 £gs PLL stable time with only 2.2 % FSK error under good design and operating conditions.
|
5 |
Delta-Sigma Modulation Applied to Switching RF Power AmplifiersAndersson, Tobias, Wahlsten, Johan January 2007 (has links)
Background: The task of this thesis is to investigate the possibility of using non-linear high efficiency switching power amplifiers with spectrally efficient varying envelope modulation schemes and, if possible, further investigate such a solution on a high level. The thesis focuses on the theory necessary to understand the technical issues related to power amplifiers and the procedures behind simulating and measuring the characteristics of different power amplifier configurations. The thesis also covers basic theory behind Delta-Sigma-modulators. The theory is needed to draw conclusions about the feasibility of using a Delta-Sigma-modulator as input to a switching amplifier. Results: Using a Delta-Sigma-modulated input to a switching amplifier inherently degrades the performance, mainly because of poor coding efficiency and high switching activity. However, by merely using a switching amplifier as a mixer it is shown to be possible to transmit a non-constant envelope signal, with digital logic. The resulting circuit is, however, not an amplifier and it should not be seen as the final result. As already mentioned: the result lies in the investigation of a using Delta-Sigma-modulator as input to a switching amplifier. Conclusion: From this investigation we believe that the widely known technique: pulse width modulation (PWM), together with a tuned switching amplifier and some linearization technique, for example pre-distortion, is a better way to go. Much effort should be put in understanding the fundamental limits and possibilities of an efficient tuned switching power amplifier.
|
6 |
Digital Δ-Σ Modulation:variable modulus and tonal behaviour in a fixed-point digital environmentBorkowski, M. (Maciej) 28 October 2008 (has links)
Abstract
Digital delta-sigma modulators are used in a broad range of modern electronic sub-systems, including oversampled digital-to-analogue converters, class-D amplifiers and fractional-N frequency synthesizers.
This work addresses a well known problem of unwanted spurious tones in the modulator’s output spectrum. When a delta-sigma modulator works with a constant input, the output signal can be periodic, where short periods lead to strong deterministic tones. In this work we propose means for guaranteeing that the output period will never be shorter than a prescribed minimum value for all constant inputs. This allows a relationship to be formulated between the modulator’s bus width and the spurious-free range, thereby making it possible to trade output spectrum quality for hardware consumption.
The second problem addressed in this thesis is related to the finite accuracy of frequencies generated in delta-sigma fractional-N frequency synthesis. The synthesized frequencies are usually approximated with an accuracy that is dependent on the modulator’s bus width. We propose a solution which allows frequencies to be generated exactly and removes the problem of a constant phase drift. This solution, which is applicable to a broad range of digital delta-sigma modulator architectures, replaces the traditionally used truncation quantizer with a variable modulus quantizer. The modulus, provided by a separate input, defines the denominator of the rational output mean.
The thesis concludes with a practical example of a delta-sigma modulator used in a fractional-N frequency synthesizer designed to meet the strict accuracy requirements of a GSM base station transceiver. Here we optimize and compare a traditional modulator and a variable modulus design in order to minimize hardware consumption. The example illustrates the use made of the relationship between the spurious-free range and the modulator’s bus width, and the practical use of the variable modulus functionality.
|
7 |
Characterizing and minimizing spurious responses in Delta-Sigma modulatorsNeitola, M. (Marko) 07 February 2012 (has links)
Abstract
Oversampling data converters based on Delta-Sigma modulation are a popular solution for modern high-resolution applications. In the design of digital-to-analog or analog-to-digital Delta-sigma converters there are common obstacles due to the difficulties on predicting and verifying their performance. Being a highly nonlinear system, a Delta-Sigma modulator’s (DSM) quantization noise and therefore the spurious tones are difficult to analyze and predict.
Multi-bit DACs can be used to improve the performance and linearize the behavior of DSMs. However, this will give rise to the need for linearizing the multi-bit DAC. A popular DAC linearization method, data weighted averaging (DWA) shapes the DAC mismatch noise spectrum. There are many variants of DWA, for low-pass and band-pass DSMs. This thesis proposes a generalization which integrates a few published variants into one, broader DWA scheme. The generalization enables expanding the tone-suppression studies into a larger concept.
The performance of one- or multibit DSMs is usually verified by simulations. This thesis proposes a simulation-based qualification (characterization) method that can be used to repeatedly verify and compare the performance of multibit DSM with a DAC mismatch shaping or scrambling scheme.
The last contribution of this thesis is a very simple model for tonal behavior. The model enables accurate prediction of spurious tones from both DSMs and DWA-DACs. The model emulates the tone behavior by its true birth-mechanism: frequency modulation. The proposed prediction model for tone-behavior can be used for developing new tone-cancelation methods. Based on the model, a DWA linearization method is also proposed. / Tiivistelmä
Delta-Sigma modulaatio on suosituin tekniikka ylinäytteistävissä datan muuntimissa. Riippumatta toteutustarkoituksesta (analogia-digitaali- tai digitaali-analogia-muunnos), Delta-Sigma (DS) modulaatiossa on yleisesti tunnettuja käyttäytymisen ennustamiseen liittyviä ongelmia. Nämä ongelmat ovat peräisin modulaattorin luontaisesta epälineaarisuudesta: DS-muunnin on nimittäin vahvasti epälineaarinen takaisinkytketty systeemi, jonka harhatoistojen ennustaminen ja analysointi on erittäin hankalaa.
Yksibittisestä monibittiseen DS-muuntimeen siirryttäessä muuntimen suorituskyky paranee, ja muuntimen kohinakäyttäytyminen on lineaarisempaa. Tämä kuitenkin kostautuu tarpeena linearisoida DS-muuntimen digitaali-analogia (D/A) muunnin. Tällä hetkellä tunnetuin linearisointimenetelmä on nimeltään DWA (data weighted averaging) algoritmi. Tässä työssä DWA:lle ja sen lukuisille varianteille esitellään eräänlainen yleistys, jonka avulla algoritmia voidaan soveltaa sekä alipäästö- että kaistanpäästö-DS-muuntimelle.
Kuten tunnettua, DS-modulaattorin analyyttinen tarkastelu on raskasta. Yksi- ja monibittisten DS-muuntimien suunnitellun käyttäytymisen varmistaminen tapahtuukin yleensä simulointien avulla. Työssä esitetään simulointiperiaate, jolla voidaan kvalifioida (karakterisoida) monibittinen DS-muunnin. Tarkemmin, kvalifioinnin kohteena on DWA:n kaltaiset D/A -muuntimien linearisointimentelmät. Kyseessä on pyrkimys ennen kaikkea toistettavaan menetelmään, jolla eri menetelmiä voidaan verrata nopeasti ja luotettavasti.
Tämän väitöstyön viimeinen kontribuutio on matemaattinen malli harhatoistojen syntymekanismille. Mallilla sekä DS-muunnoksen että DWA-D/A -muunnokseen liittyvät harhatoistot voidaan ennustaa tarkasti. Harhatoistot mallinnetaan yksinkertaisella havaintoihin perustuvalla FM-modulaatiokaavalla. Syntymekanismin mallinnus mahdollistaa DS-muuntimien ennustettavuuden ja täten auttaa harhatoiston kumoamismenetelmien kehittämistä. Työssä esitetään yksi matemaattisen mallin avulla kehitetty DWA-D/A -muunnoksen linearisointimenetelmä.
|
8 |
Time-based oversampled analog-to-digital converters in nano-scale integrated circuitsJung, Woo Young 30 March 2015 (has links)
In this research, a time-based oversampling delta-sigma (ΔΣ) ADC architecture is introduced. This system uses time, rather than voltage or current, as the analog variable for its quantizer, and the noise shaping process is realized by modulating the width of a variable-width digital “pulse.” The ΔΣ loop integrator, the quantizer and digital-to-analog converter (DAC) are all time-based circuits and are implemented using digital gates only. Hence, no amplifier or voltage-based circuit is required. The proposed architecture not only offers a viable for nano-scale ‘digital’ IC technologies, but also enables improved circuit performance compared to the state-of-the-art. This is in contrast to conventional voltage-based analog circuit design, whose performance decreases with scaling due to increasingly higher voltage uncertainty due to supply voltage. The proposed architecture allows all digital implementation after the Voltage to Time Converter (VTC) and merged multi-bit quantizer/DAC blocks by taking advantage of delay lines reusable in both quantization and DAC operation. The novelty of this architecture is digital pulse width processing to implement the ΔΣ modulation. It is realized with small area and potentially can take advantage from the process scaling. A 3-bit prototype of this ADC in 0.18 μm CMOS process is implemented, tested, and presented. With an OSR of 36 and a bandwidth of 2 MHz, it achieves a SNDR of 34.6 dB while consuming 1.5 mA from a 1.8 V supply. The core occupies an area of 0.0275 mm² (110μm × 250μm = 0.0275 mm²). The second generation of the architecture was fabricated in IBM 45 nm SOI process. The oversampling frequency of this system is 705 MHz and oversampling ratio of 64. The expected performance is 7-bit effective resolution for a 5.5 MHz bandwidth while consuming 8mW of power and occupying a core area of less than 0.02 mm² (160μm × 120μm = 0.0192 mm²). / text
|
9 |
Investigation of Time Domain Modulation and Switching-Mode Power Amplifiers Suitable for Digitally-Assisted TransmittersFrebrowski, Daniel Jordan January 2010 (has links)
Innovation in wireless communication has resulted in accelerating demand for smartphones using multiple communications protocols such as WiFi, Bluetooth and the many cellular standards deployed around the world. The variety of frequency, bandwidth and power requirements associated with each standard typically calls for the implementation of separate radio frequency (RF) front end hardware for each standard. This is a less-than-ideal solution in terms of cost and device area. Software-defined radio (SDR) promises to solve this problem by allowing the RF hardware to be digitally reconfigurable to adapt to any wireless standard. The application of machine learning and cognition algorithms to SDR will enable cognitive radios and cognitive wireless networks, which will be able to intelligently adapt to user needs and surrounding radio spectrum conditions.
The challenge of fully reconfigurable transceivers is in implementing digitally-controlled RF circuits which have comparable performance to their fixed-frequency counterparts. Switching-mode power amplifiers (SMPA) are likely to be an important part of fully reconfigurable transmitters since their switching operation provides inherent compatibility with digital circuits, with the added benefit of very high efficiency. As a step to understanding the RF requirements of high efficiency and switching PAs, an inverse class F PA in push-pull configuration is implemented. This configuration is chosen for its similarity to the current mode class D (CMCD) topology. The fabricated PA achieves a peak drain efficiency of over 75% with 42.7 dBm (18.6 W) output power at 2.46 GHz.
Since SMPAs cannot directly provide the linearity required by current and future wireless communications standards, amplitude information must be encoded into the RF signal in a different way. Given the superior time resolution of digital integrated circuit (IC) technology, a logical solution is to encode this information into the timing of the signal. The two most common techniques for doing so are pulse width modulation and delta-sigma modulation. However, the design of delta-sigma modulators requires simulation as part of the design process due to the lack of closed-form relationships between modulator parameters (such as resolution and oversampling) and performance figures (such as coding efficiency and signal quality). In particular, the coding efficiency is often ignored although it is an important part of ensuring transmitter efficiency with respect to the desired signal. A study of these relationships is carried out to observe the tradeoffs between them. It is found that increasing the speed or complexity of a DS modulated system does not necessarily translate to performance benefits as one might expect. These observations can have a strong impact on design choices at the system level.
|
10 |
Investigation of Time Domain Modulation and Switching-Mode Power Amplifiers Suitable for Digitally-Assisted TransmittersFrebrowski, Daniel Jordan January 2010 (has links)
Innovation in wireless communication has resulted in accelerating demand for smartphones using multiple communications protocols such as WiFi, Bluetooth and the many cellular standards deployed around the world. The variety of frequency, bandwidth and power requirements associated with each standard typically calls for the implementation of separate radio frequency (RF) front end hardware for each standard. This is a less-than-ideal solution in terms of cost and device area. Software-defined radio (SDR) promises to solve this problem by allowing the RF hardware to be digitally reconfigurable to adapt to any wireless standard. The application of machine learning and cognition algorithms to SDR will enable cognitive radios and cognitive wireless networks, which will be able to intelligently adapt to user needs and surrounding radio spectrum conditions.
The challenge of fully reconfigurable transceivers is in implementing digitally-controlled RF circuits which have comparable performance to their fixed-frequency counterparts. Switching-mode power amplifiers (SMPA) are likely to be an important part of fully reconfigurable transmitters since their switching operation provides inherent compatibility with digital circuits, with the added benefit of very high efficiency. As a step to understanding the RF requirements of high efficiency and switching PAs, an inverse class F PA in push-pull configuration is implemented. This configuration is chosen for its similarity to the current mode class D (CMCD) topology. The fabricated PA achieves a peak drain efficiency of over 75% with 42.7 dBm (18.6 W) output power at 2.46 GHz.
Since SMPAs cannot directly provide the linearity required by current and future wireless communications standards, amplitude information must be encoded into the RF signal in a different way. Given the superior time resolution of digital integrated circuit (IC) technology, a logical solution is to encode this information into the timing of the signal. The two most common techniques for doing so are pulse width modulation and delta-sigma modulation. However, the design of delta-sigma modulators requires simulation as part of the design process due to the lack of closed-form relationships between modulator parameters (such as resolution and oversampling) and performance figures (such as coding efficiency and signal quality). In particular, the coding efficiency is often ignored although it is an important part of ensuring transmitter efficiency with respect to the desired signal. A study of these relationships is carried out to observe the tradeoffs between them. It is found that increasing the speed or complexity of a DS modulated system does not necessarily translate to performance benefits as one might expect. These observations can have a strong impact on design choices at the system level.
|
Page generated in 0.1336 seconds