The synthesis of well-defined polymer nanoparticles will have immediate applications in the biomedical industry as nanocontainers for the controlled delivery and release of water insoluble drugs. The ability to control molecular weight, particle morphology and chemical functionality and to obtain polymeric nanoparticles with narrow molecular weight and particle size distributions is paramount for their application-specific design. Two synthetic approaches were investigated in the synthesis of well-defined polymer nanoparticles, emulsion polymerization and self assembly. The successful implementation of Reversible Addition-Fragmentation Chain Transfer (RAFT) in emulsion polymerization was the first challenge faced when controlling nanoparticle molecular weight and size. Initially we showed that successful ‘living’ emulsion polymerizations of styrene could be carried out using a non-ionic surfactant. The success was achieved when preparing polymers of low molecular weight (5 and 9 K targeted Mn’s with polydispersities (PDIs) below 1.2). Deviation from ideal ‘living’ behavior occurred when targeting Mn’s greater than 20 K (at 100 % conversion). The ‘degassing technique’ was then investigated as an avenue to generate stable polystyrene nanoparticles by emulsion polymerization without the addition of surfactant (residual surfactant can result in detrimental effects on product quality). The polymerization of this emulsion system in the presence of a low reactive RAFT agent was ‘living’ in nature. In the presence of a high reactive RAFT agent the emulsion system showed ‘living’ nature, however, secondary nucleation occurred, which resulted in broad molecular weight distribution (MWD). Thus, the emulsion polymerization approach to preparing well-defined polymer nanoparticles was giving less than desirable results. An alternative method to prepare polymer nanoparticles with controlled chemical composition and morphology is to self assemble pre-synthesized block copolymers in water. This approach has several significant advantages over the emulsion systems: (i) all polymer chains are of near uniform chain length and chemical composition, (ii) the ratio between the hydrophobic and hydrophilic polymers can easily be controlled, (iii) chemical functionality can be located in different morphological regions, (iv) a wide range of 3-dimensional structures apart from spheres can be prepared (i.e. rods and vesicles), and (v) additives such as surfactant, stabilizers and residual monomer usually found after an emulsion polymerization are not required in the self assembly methodology. These advantages justify our shift in strategy. The only disadvantage of the self assembly process is that one cannot reach high weight fractions of polymer in water and is usually limited to below 2 wt-%, where as emulsion polymerizations can allow weight fractions of polymer close to 50 wt-%. Well-defined amphiphilic 4-arm star polyacrylic acid-block-polystyrene (PAA-b-PSTY) copolymers, prepared by RAFT solution polymerization, were dispersed in water to form core-shell micelles, in which the shell consisted of tethered PAA loops. The entropic penalty for having such loops resulted in a less densely packed PSTY core when compared to linear diblock copolymers of the same arm length. The surface of the shell was irregular due to the tethering points, but when cleaved the PAA chains extended to form a regular and relatively uniform corona. Controlling the polymer architecture enabled the synthesis of polymer micelles with tethered PAA loops, which could be opened to form uniform corona when desired. Three-miktoarm star and dendrimers with miktoarms consisting of PSTY, polytert-butyl acrylate (PtBA), polymethyl acrylate (PMA) and PAA were then synthesized using a combination of Atom Transfer Radical Polymerization (ATRP) and Huisgen 1,3-dipolar cycloaddition ‘click’ reactions. In all reactions, the stars and dendrimers were well-defined with PDIs lower than 1.09. This was the first step in the synthesis of well-defined highly ordered polymer structures. The synthesis of such structures demands high level of purity at each synthetic step eliminating the possibility of side reactions, which as of consequence lowers product yields. The synthesis and use of reactive solid supports to remove excess linear polymer to increase the yields of polymeric 3-arm stars and dendrimers was employed. These supports are a cheap approach to scavenge polymeric species with either azido or alkynyl functionality, after which the solid support can be filtered away from the product. These supports aided the synthesis of 3rd generation polymeric dendrons and dendrimers consisting of homopolymer PSTY with either solketals or alcohols at the periphery, diblock PSTY and PtBA, and amphiphilic diblock. The methodology used to construct these structures was a combination of ATRP to produce linear polymers with telechelic functionality, with the subsequent use of this functionality to join the polymers together via ‘click’ reactions. Micellization of the amphiphilic structures in water produced polymer nanoparticles of uniform size. The dendrimer nanoparticles were 18 nm in diameter, consisting of 19 individual dendrimers. The dendrimers most probably have no mutual interpenetration and thus pack uniformly to form the micelles. The dendron nanoparticles were 21 nm with an aggregation number of 43 dendrons per micelle, which suggests they form cone-like structures and self-assemble to form crew-cut micelles. Using a convergent approach polymer structures with unprecedented chemical diversity (hydrophobic or amphiphilic) and complexity (G2 miktoarm dendrimers with a degradable core) consisting of PSTY, PMA, PtBA and PAA were then synthesized with high purity using copper wire as the ‘click’ catalyst.

No description available.

L’auto-assemblage de macromolécules amphiphiles dans des solutions aqueuses est un mécanisme important sous-jacent à de nombreux processus présents dans les organismes vivants. La formation spontanée de structures auto-organisées de phospholipides et de biomacromolécules se produit en raison d'un équilibre délicat entre les forces d'attraction et de répulsion. Ces forces comprennent l'attraction hydrophobe, la liaison hydrogène, les forces de coordination des métaux et la répulsion stérique ou électrostatique. En outre, l'auto-assemblage de molécules amphiphiles synthétiques est largement utilisé dans divers domaines technologiques. Un exemple frappant est celui des surfactants de faible poids moléculaire qui peuvent modifier de manière significative les propriétés des systèmes. Les autres domaines importants dans lesquels les tensioactifs et les macromolécules amphiphiles sont activement utilisés sont la cosmétologie et l'hygiène. Cependant, l'utilisation de structures auto-organisatrices de macromolécules amphiphiles nécessite une étude approfondie et soulève quelques questions pour les chercheurs concernant leur structure, leur comportement sous l'influence de facteurs externes et leur stabilité. L'objectif principal de la thèse était de développer une théorie de champ analytique auto-cohérente de l'auto-organisation dans des solutions de copolymères de déblocage non ioniques linéaires dendritiques et dendritiques doubles dans des solvants sélectifs. Cette théorie nous permet de prédire comment la dendronisation d'un ou des deux blocs affecte les propriétés structurelles et thermodynamiques d'assemblages auto-organisés formés par des copolymères. Il a été démontré que la dendronisation des corona bloc permet d’obtenir les micelles stables de taille relativement petite, mais avec de nombreux groupes terminaux. Cette dernière caractéristique est particulièrement intéressante dans le contexte de la liberation contrôlée, puisque les groupes terminaux exposés à l'environnement peuvent être facilement fonctionnalisés par des groupes de ligands pouvant être ciblés. Ces deux caractéristiques peuvent être obtenues simultanément car la dendronisation des corona bloc réduit le nombre d'agrégation à l'équilibre et les dimensions globales des micelles par rapport aux micelles formées par des molécules de copolymères diblocs linéaires homologues tout en conservant un grand nombre de groupes terminaux par micelle. La dendronisation du bloc insoluble peut être utilisée pour augmenter le nombre d'unités monomères terminales dans le core. Nous avons également démontré que la dendronisation des blocs solubles favorise la formation de micelles sphériques, alors que les gammes de stabilité thermodynamique des micelles cylindriques et des dendrimersomes sont déplacées vers un degré plus élevé de polymérisation des séquences insolubles. Au contraire, la dendronisation du bloc insoluble a l'effet inverse et conduit à un élargissement des gammes de stabilité des polymeres et des micelles cylindriques.Nous avons étudié les effets de l'extensibilité finie dans les brosses polyélectrolytes à chaîne linéaire et à dendron contenant des groupes ioniques. Nous avons développé la théorie analytique des brosses polyélectrolytiques dans l'approximation de Poisson-Boltzmann qui explique explicitement l'extensibilité finie des chaînes de polyélectrolytes formant des brosses. Il a été montré que pour la même série de paramètres de la brosse, la théorie basée sur l’élasticité non linéaire des polyions prédit une épaisseur de la brosse plus faible et une plus grande amplitude du saut de la densité du polymère au bord du pinceau. Les connaissances obtenues fourniront une base rationnelle pour la conception moléculaire de nouveaux copolymères à blocs complexes sur le plan architectural, y compris ceux destinés à des applications médicales. / An important mechanism underlying many processes occurring in living organisms is self-assembly of amphiphilic (macro)molecules in aqueous solutions. Spontaneous formation of self-organized structures of phospholipids and biomacromolecules occurs because of a delicate balance between attraction and repulsion forces. Such forces include hydrophobic attraction, hydrogen bonding, metal coordination forces and steric or electrostatic repulsion.In addition, self-assembly of synthetic amphiphilic molecules is widely used in various technical fields. A striking example are low molecular weight surfactants (small amphiphilic molecules) that can significantly change the properties of systems. Other important areas in which surfactants and amphiphilic macromolecules are actively used are cosmetology and hygiene. However, the use of self-organizing structures of amphiphilic macromolecules requires detailed study and raises a few questions for researchers regarding their structure, behavior under the influence of external factors and their stability.The main goal of the present work was development of the theory of self-assembly of diblock copolymers where one or both of blocks (soluble or/and insoluble) exhibit dendritic branching and established relations between degree of branching of the block(s) and structural properties (size, shape, aggregation number) of the self-assembled aggregates.The major focus of the thesis was on developing an analytical self-consistent field theory of self-organization in solutions of non-ionic linear-dendritic and double-dendritic deblock copolymers in selective solvents. This theory enables us to predict how dendronization of one or both blocks affects structural and thermodynamic properties of self-organized assemblies formed by copolymers. It was demonstrated that dendronisation of the corona blocks allows obtaining the stable micelles of relatively small size, but with many terminal groups.The latter feature is most attractive in the context of controlled delivery, since the exposed to the environment terminal groups can be readily functionalized by targetable ligand groups. Both these features can simultaneously be achieved because dendronization of the corona blocks reduces the equilibrium aggregation number and overall dimensions of micelles compared to micelles formed by homologous linear-linear diblock copolymer molecules while keeping large number of terminal groups per micelle. Dendronization of the insoluble block may be used for increasing of the number of terminal monomer units in the core. Such terminal groups can be further functionalized to be able to interact with active drugs, thereby increasing the loading capacity of the micelle.We have also demonstrated that dendronization of the soluble blocks favors formation of spherical micelles, whereas the ranges of thermodynamic stability of cylindrical wormlike micelles and dendrimersomes are shifted to larger degree of polymerisation of the insoluble blocks. On the contrary, dendronization of the insoluble block has the opposite effect and leads to widening of the stability ranges of polymersomes and cylindrical micelles.We investigated effects of finite extensibility (non-linear elasticity) in linear chain and dendron polyelectrolyte brushes containing ionic groups. We developed the analytical theory of polyelectrolyte brushes within the Poisson-Boltzmann approximation which explicitly accounts for finite extensibility of the brush-forming polyelectrolyte chains. It was shown that for the same set of the brush parameters the theory based on non-linear elasticity of the polyions predicts smaller thickness of the brush and larger magnitude of the jump in polymer density at the edge of the brush.The obtained knowledge will provide a rational background for molecular design of novel architecturally complex block copolymers, including those for medical applications.

Förfrågan efter nya och mer avancerade applikationer är en pågående process vilket leder till en konstant utveckling av nya material. För att förstå relationen mellan en applikations egenskaper och dess sammansättning krävs full förståelse och kontroll över materialets uppbyggnad. En sådan kontroll över uppbyggnaden hos material hittas i en undergrupp till dendritiska polymerer som kallas dendrimerer. I den här doktorsavhandlingen belyses nya metoder för att framställa dendrimer med hjälp av selektiva kemiska reaktioner. Sådana selektiva reaktioner kan hittas inom konceptet klickkemi och har i detta arbete kombinerats med traditionell anhydrid- och karbodiimidmedierad kemi. Denna avhandling diskuterar en accelererad tillväxtmetod, dendrimerer med inre och yttre reaktiva grupper, simultana reaktioner och applikationer baserade på dessa dendritiska material. En accelererad tillväxtmetod har utvecklats baserad på AB2- och CD2-monomerer. Dessa monomerer tillåter tillväxt av dendrimerer utan att använda sig av skyddsgruppkemi eller aktivering av ändgrupper. Detta gjordes genom att kombinera kemoselektiviteten hos klickkemi tillsammans med traditionell syraklorid kopplingar. Dendrimerer med inre alkyn- eller azidfunktionalitet syntetiserades genom att använda AB2C-monomerer. Den dendritiska tillväxten skedde med hjälp av karbodiimidmedierad kemi. Monomererna som användes bär på en C-funktionalitet, alkyn eller azid, och på så sätt byggs får interiören i de syntetiserade dendrimeren en inneburen aktiv funktionell grupp. Ortogonaliteten hos klickkemi användes för att sammanfoga monomerer till en dendritisk struktur. Traditionell anhydridkemi- och klickemireaktioner utfördes samtidigt och på så sätt kunde dendritiska strukturer erhållas med färre antal uppreningssteg. En ljusemitterande dendrimer syntetiserades genom att koppla azidfunktionella dendroner till en alkynfunktionell cyclenkärna. Europiumjoner inkorporerades i kärnan varpå dendrimerens fotofysiska egenskaper analyserades. Mätningarna visade att den bildade triazolen hade en sensibiliserande effekt på europiumjonen. Termiska studier på några av de syntetiserade dendrimerer utfördes för att se om några av dem kunde fungera som templat vid framställning av isoporösa filmer. / The need for new improved materials in cutting edge applications is constantly inspiring researchers to developing novel advanced macromolecular structures. A research area within advanced and complex macromolecular structures is dendrimers and their synthesis. Dendrimers consist of highly dense and branched structures that have promising properties suitable for biomedical and electrical applications and as templating materials. Dendrimers provide full control over the structure and property relationship since they are synthesized with unprecedented control over each reaction step. In this doctoral thesis, new methodologies for dendrimer synthesis are based on the concept of click chemistry in combination with traditional chemical reactions for dendrimer synthesis. This thesis discusses an accelerated growth approach, dendrimers with internal functionality, concurrent reactions and their applications. An accelerated growth approach for dendrimers was developed based on AB2- and CD2-monomers. These allow dendritic growth without the use of activation or deprotection of the peripheral end-groups. This was achieved by combining the chemoselective nature of click chemistry and traditional acid chloride reactions. Dendrimers with internal azide/alkyne functionality were prepared by adding AB2C monomers to a multifunctional core. Dendritic growth was obtained by employing carbodiimide mediated chemistry. The monomers carry a pendant C-functionality (alkyne or azide) that remains available in the dendritic interior resulting in dendrimers with internal and peripheral functionalities. The orthogonal nature of click chemistry was utilized for the simultaneous assembly of monomers into dendritic structures. Traditional anhydride chemistry and click chemistry were carried out concurrently to obtain dendritic structures. This procedure allows synthesis of dendritic structures using fewer purification steps. Thermal analyses on selected dendrimers were carried out to verify their use as templates for the formation of honeycomb membranes. Additionally, a light emitting dendrimer was prepared by coupling of azide functional dendrons to an alkyne functional cyclen core. A Europium ion was incorporated into the dendrimer core, and photophysical measurements on the metal containing dendrimer revealed that the formed triazole linkage possesses a sensitizing effect. / QC 20100629

No description available.