published_or_final_version / Electrical and Electronic Engineering / Doctoral / Doctor of Philosophy

Approved for public release; distribution is unlimited / The naval vessels of the future will require lighter, more compact, and more versatile power electronics systems. With the advent of the DC Zonal Electrical Distribution System, more innovative approaches to the conversion of the dc bus power to ac power for motor drives will enhance the efficiency and warfighting capability of tomorrow's ships. This thesis explores the concept of a hybrid dc-ac power converter that combines a hysteresis controlled inverter with a six-step bulk inverter. A six-step bulk inverter is built from discrete components and tested in simulation and hardware. The two inverters are connected in parallel to provide a high-fidelity current source for a three-phase load. The addition of the hysteresis inverter to the bulk inverter adds a closed current loop for more robust control and improves the quality of the output load current. / Major, United States Marine Corps

A thesis submitted to the Faculty of Engineering, University of the Witwatersrand, Johannesburg, in fulfillment of the requirements for the Degree of Doctor of Philosophy. / Variable speed motors are achieved by varying the voltage of a DC machine or by varying the frequency of an AC machine, the former method being the simpler of the two. DC motors have the major disadvantage of brushes and commutators which require regular downtime for maintenance, a fact already recognised by Tesla [1] in 1888. Thus the AC motor, in particular the induction motor, is of a more rugged design and does not suffer from the commutator problem of its DC counterpart. Recent advances in the technology of the power electronics used to supply a variable frequency to the motor has allowed the induction motor to be a viable alternative to the DC motor in variable speed applications. Problems have been encountered in industry when an inverter is injudiciously selected to be combined with a motor. Such problems were highlighted by difficulties being experienced with some 400 kW inverter drives. The inverters had been bought from one supplier and the motors from another. When this system was coupled together, there was excessive heating in the motors and the overall plant was only able to operate well below its capacity, incurring a substantial weekly loss of income. The motor and inverter were evidently incompatible, and since the inverter could not be modified, the motor was redesigned to make it less susceptible to the harmonics present in the inverter waveform, These problems have led to the development of a variable speed drive simulation package at the University for use by the local industry which can accurately model the complete system of inverter, motor and its associated load. It is envisaged that this package could be used to predict the performance of a drive system and highlight problems that may occur. To be able to do this, an accurate model of the motor is required. This investigation gives the development of an induction motor model which is suitable . for variable speed drive system simulations. The model accounts for the deep bar effect by using lumped parameter circuits and includes saturation of the leakage paths using only information which is typically available from motor design data. A complete analysis is given of the different lumped parameter models and their suitability for use in this application. The thesis also shows the utilisation of the deep bar model to simulate reswitching transients and double cage motors. The author hopes that the models used in the simulation package wallow industry to predict problems prior to their occurrence, alter the designs and thereby avoid costly remanufacture of the system. / Andrew Chakane 2018

Thesis. 1975. Ph.D.--Massachusetts Institute of Technology. Dept. of Mechanical Engineering. / Vita. / Includes bibliographical references. / Ph.D.

Thesis. 1977. B.S.--Massachusetts Institute of Technology. Dept. of Mechanical Engineering. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING. / Includes bibliographical references. / B.S.

Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, June 2004. / Thesis advisor(s): Robert Ashton. Includes bibliographical references (p. 73-74). Also available online.

published_or_final_version / Electrical and Electronic Engineering / Doctoral / Doctor of Philosophy

Thesis (M. E. (Hons))--University of Western Sydney, 2002. / "A thesis submitted for Master of Engineering (Honours), School of Engineering & Industrial Design, University of Western Sydney, October 2002" Bibliography: leaves 147 - 149.

Thesis (Ph. D.)--University of Hong Kong, 2008. / Includes bibliographical references (p. 169-182) Also available in print.

Thesis: B.S., Massachusetts Institute of Technology, Department of Physics, 1982 / Vita. / Includes bibliographical references (leaf 185). / by Osa Edward Fitch. / B.S. / B.S. Massachusetts Institute of Technology, Department of Physics