The thesis is focused on the preparation of documentation for reconstruction of the electrical distribution installation in a family house. There are described problems of the original installation and the consequences associated with it. It explains how to design a new installation, on what to watch and what to follow. The next chapter is compared with conventional wiring and intelligent comparison and selection of a more nejvhod-solving. Furthermore, a thorough documentation of the pin assignment, and wiring circuits. The last chapter is presented draft of web interface for control.

This diploma thesis focused on designing of systematic wiring of multifunctional sports centrum. The work is divided into two parts. The first part of the work is dealing with definitions and principles necessary for electrical project documentation. There is a presentation of the KNX bus control system, which is chosen for the implementation of the systematic wiring of the sports centrum. There is also an overview of currently used systems for wiring control. At the end, the design of artificial and emergency lighting is processed using a computer program. The content of the second part of the work is a complete project documentation for construction of the multifunctional sports hall using the KNX bus system. Furthermore, the documentation draws the design of power and data distribution to the relevant floor plans of the building, the design of power and system switchboards, an overview scheme of power distribution, topology of the KNX system, budget and technical report.

This thesis deals with the classic and system wiring as well as their implementation and visualization environment for its operation. The aim of this work is to implement the project of the existing high-voltage and low-voltage wiring housing units accompanied by a design of the system wiring. This design is then fully implemented. In the beginning of the work is introduction to system wiring as such, added by a brief comparison of current systems. Followed by two chapters dealing with two selected systems for the realization of wiring. These chapters succinctly capture the essence of the system, its characteristics and features offered by each system. The last part deals with project design of wiring for the residential unit and the procedure for its commissioning. The practical part is dedicated to creating drawings with the existing power and low voltage distribution systems, the design of the smart wiring and electrical switchboard, together with possible modifications. The project documentation also discusses technical report. Finally, the selected system is tested and commissioned according to the requirements.

This diploma thesis focuses on the designing of the systematic wiring in hostel complex, including student dormitory and bar. The work is divided into two parts. The theoretical part involves an overview of current most used intelligent systems. Furthermore, there is a description of the TECO Foxtrot system, which is used to control the complex. The theoretical part summarizes the basic definitions for creating project documentation. Finally, the chapter closes with an outline of a general artificial and escape route emergency lighting design generated using WILS 7.0 software. In the practical part of the diploma thesis, there is a complete project documentation consisting of all requisites needed in the given level of documentation for the construction of a complex of hostel, dormitory and bar using the TECO Foxtrot system. The project documentation contains floor plans of the whole complex, in which the power and data distribution are drawn. It also contains a diagram of wiring of power and system switchboards, topological diagram of power and system distribution, budget and technical report.

This work topic is development and history of intelligent wiring systems in Czech Republic as well as abroad. The firs paragraphs describe following: intelligent wiring systems, the differences between classic and intelligent wiring systems and consequently is described the intelligent wiring system itself (types, principles, advantages, disadvantages etc.). Detailed description of system Inels follows in the next chapters. This system is supposed to be the fundamental matter of this work and is used in consequent suggestions for intelligent wiring system that is defined at the end of the theoretical part of this work. At the conclusion the economic evaluation of various wiring options and assessment by the multicriteria analysis (MCA) will be provided.

This thesis is describing DPS power and data circuits installations for a historical listed building. Firstly, the theory describes requirements for architects and designs, the types of designs, the laws and directives. This part also contains instructions on how to lay the circuits, how to create environmental report and other topics closely related to design and architecture. Secondly, there is description of the design of the power and data installations for the building. The third practical section contains full project design documentation for power and data circuits for this building including technical drawing, environmental report, ground plans of the building, drawings of switchboards and block drawings. The outcome of this report is to present the theory and then create all relevant documentation for this historical building.

This master’s thesis tries to show the differences between usual obsolete indoor wiring and clas-sic indoor wiring used these days and also between this „classic“ indoor wiring and „intelligent wiring“. There is insisted on selection and optimalization of the adequate system for a concrete building and there is made a question of specifications of the user or the customer, his preferen-ces (financial, space, family etc.), disadvantages and advantages of the current system. Whereas it’s impossible to satisfy all the users in these problems by reason of diversity of the buildings (it can be a lot of variants of family houses or small apartments), the systems in this thesis are ap-plied only on the most frequent types of houses. Quite lot of firms deal in this country with indo-or wiring, the most known are ABB, ELKO EP and Moeller. Each of these firms offers different alternatives of systems. From the simplest, basic alternative, to most sophisticated „intelligent“ systems, which can care about almost everything, what is common with electrical energy. These different systems, their review, advantages and disadvantages are also presented in this work. Preliminary there is analysed the whole issue from the historical view and there is briefly explai-ned, what the system wiring is. In the next chapter there is a complex description of the actual state of known firms and systems on the present-day market in our country and in the world. The-re is also summarised the basic structure and the overall comparison of the most frequently used bus systems. In the next two chapters there are presented the main objectives of this work and the methods and procedures, how to achieve these objectives. The central part of this work is the next to last chapter, in which there are presented the different model variants of the project, applied to the real residential building - middle-sized family house. That is realized on the basis of the spe-cified requirements on the designed system. Before that there was performed the complex design of the situation scheme of all usual electrical appliances and lighting system in the house. In the end the whole work is in summary analysed, mainly in term of costs of each variant of the pro-ject. By virtue of this can the reader make a better view about the whole financial problem of the system wiring, that means, how much he has to invest in his concrete wiring. In the end of the work there is attached the detailed documentation to all alternatives of the project, such as dra-wings (complex horizontal plans) and costs budget of all used items and the wiring material.

Master thesis on topic Design of intelligent data distribution network is focused on the design of KNX bus system. The theoretical part is focused on problematic of KNX technology and on the rules, regulations and forms which must correct project documentation contain. The practical part is focused on creation of complete design of project documentation KNX bus system. In this thesis is basically shown how project documentation should look like.

This master's thesis deals with intelligent wiring Foxtrot and use in the field of lighting. The theoretical part is comparsion of classical and intelligent wiring. This section provides an overview of the most widely used bus system for building control in our market. Thesis is devoted to the description of the Foxtrot system and development environment mosaic. In the development environment Mosaic is designed program for lighting control DALI interface. WebMaker enabled program visualization and his remote contorol. The result of practical part is a lab manual.

The thesis deals with the topic of intelligent installation systems in the context of non-industrial automation. The first part discusses the KNX technology as well as realization of educational board demonstrating the i-bus® intelligent installation by ABB, designed according to KNX/EIB standard. Text further explains the specifics of board elements in detail. Second part is dedicated to created tutorial tasks, targeted to be used by students. These tasks are focused on the basic board element properties and their collaboration.