Abstract The Embedded controls panel belongs to the components, in the terminal product overhead construction, forever is a supporting role, but actually is occupying the indispensable core status. Under division of labor system, in view of the fact that the product characteristic, the system industry cannot meddle in the design and the manufacture, also because its may the support be widespread, is industry which belongs specialized also may independently develop. Technical progress, effective promotion technology with producing energy, but has an inevitable phenomenon, will be in this stage that supply will surpass demand, but attacks each industry. The Embedded control panel industry not exceptional entered the Warring States time, the potential has certainly to have many physique to be worse, to be unable properly to adjust the suitable same business to be able to swallow in competition sea. This tendency is unable to keep off, where but doesn't have red sea to have the blue sea, the crisis is the favorable turn time, starts an undertaking leader which has not been able to become the market, now actually also is becomes market Challenger the turning point. Company's energy is limited, must the effective utilization, therefore must be able thoroughly understand the market, discovered customer's real demand, the fixed industry development tendency, according to strengthens the company competitive ability, it can stand in this market to the invincible position, in is stable strives for the development. Is the management essence in the layout, how this research goal repeatedly carefully examining the market, the product and the customer after the discussion document company, draws up the effective feasible whole development strategy, again penetrates the company interior the reform, of competitive ability the strengthened product, innovates, uniquely promotes good reputation in the global Embedded controls panel competitive market. The research the main conclusion is as follows: 1. Penetrates the market investigation, the product, the customer behavior pattern repeatedly discussion, draws up the company whole development strategy, is clear about the limits enterprise to manage the pattern and the development direction. 2. To in affiliation by the management technique, the realization company is basic and the core competitive ability constructs the construction, the promotion enterprise manages the physique. 3. Foreign rests on the global layout strategy plan, the coordinate product life cycle management, vertical and operation horizontal marketing, steady expands the enterprise domain.

This work describes the modeling, control design, and experimental verification of an electromagnetic suspension system with position feedback using infrared sensors. A nonlinear model is obtained by fitting a first principle analytical model of the system to experimental data. A sliding control strategy is designed using a sliding surface derived from the model to achieve robust stabilization for the closed-loop system. The control is then implemented on an embedded commercial DSP system for experimental verification of the designed control on a laboratory scale electromagnetic suspension system. To compensate for the steady-state tracking error, two modifications are considered. In the first method, a small magnitude integral term is added to the error feedback, equivalently adjusting the reference signal and eliminating the constant bias. In the second method, an integral sliding control is considered, using a higher-order sliding surface, which also eliminates the constant bias. The experimental results show the efficacy of all designed control techniques. The modified techniques, unlike the original design, effectively eliminate the constant position error.

<p>With rising temperatures, urbanization, population growth, improving economic wellbeing, decarbonization and electrification efforts, the demand for space cooling and heating equipment is continuously increasing around the world. To counteract the effect of rising demand for air conditioners and heat pumps on total energy consumption, peak electricity demand, and emissions, it is crucial to promote the development and market penetration of energy-efficient systems. Establishing minimum energy performance standards (MEPS), energy labeling and utility programs are some of the effective and tested methods for achieving this goal. The technical basis for these energy efficiency standards is a testing and rating procedure for estimating equipment seasonal performance from laboratory tests. Although the current rating procedures provide standardized metrics to compare different equipment performances, they fail to appropriately characterize the field representative performance of systems by not considering the effects of: 1) test unit embedded controls, thermostat, and realistic interactions with the building load and dynamics; 2) different climate zones and building types; and 3) and other integrated accessories for improving energy efficiency such as economizer for rooftop units (RTUs). Therefore, current approaches for performance ratings neither incentives the development and implementation of improved system and control designs nor consumers with a metric that represents the advanced systems' actual energy savings. To address this, a load-based testing methodology that enables dynamic performance evaluation of equipment with its integrated controls, thermostat, and other accessories was recently proposed. The test methodology is based on the concept of emulating the response of a representative building conditioned by the test unit in a test lab using a virtual building model. </p> <p>In this work, the proposed load-based testing methodology was further extended, evaluated, and validated for residential heat pumps to integrate it into next-generation energy efficiency testing and rating procedures and to serve as a tool for engineers to develop and validate improved control algorithms in a laboratory setting. Further, a load-based testing method for evaluating the dynamic performance of RTUs with integrated economizers was also developed and demonstrated.</p> <p>A load-based testing approach previously developed for residential cooling equipment is extended for heat pump heating-mode and demonstrated for a variable-speed system. The heat pump's typical dynamic behaviors are captured along with controller imperfections that aren't reflected in current testing approaches. Further, a comprehensive comparison was performed between the proposed load-based testing approach to the current steady-state testing approach in the U.S., AHRI 210/240, based on performance evaluation of three residential variable-speed heat pumps to understand the differences and their significance for the next-generation rating procedure. For cooling mode, steady-state testing estimates higher seasonal performance, but for heating mode, the steady-state testing approach estimates higher seasonal performance for warmer climates and is comparable for colder climates. The load-based testing methodology was validated by comparing the laboratory performance of a heat pump to that of a residential building in a controlled environment. The virtual building modeling approach for building loads and thermal dynamics effectively captured these characteristics of the house. The heat pump's cycling rate response with run-time fraction, which represents the unit's overall dynamic response, matched well between lab load-based tests and house tests. The test unit's COP difference for cooling and heating tests was within 3% between the two facilities, except for 9% in 95°F and 6% in 104°F cooling dry-coil test intervals. To evaluate the applicability of the developed load-based testing methodology as next-generation rating standards, its repeatability and reproducibility were assessed based on multiple heat pump round-robin tests conducted in two labs. Overall, reasonable to good repeatability was observed in load-based test results in both labs, however, poor reproducibility was observed except for one heat pump heating mode results. A root cause analysis of the observed differences along with recommendations for a next-generation rating approach are presented. This work aided in the development of a CSA (Canadian Standards Association) standard EXP07:19 and its subsequent revision for equipment rating based on load-based testing.</p> <p>The application of the load-based testing methodology as a tool for the development and evaluation of a residential heat pump controller design was demonstrated. Further, a load-based testing methodology was developed and demonstrated for the dynamic performance evaluation of RTUs with integrated economizers in a test laboratory setting. Recommendations for future work to further develop and improve the repeatability, reproducibility, and representativeness of the load-based testing and rating approach for residential and commercial air conditioners and heat pumps are summarized at the end of the dissertation. </p>