Although the level of automation in the automotive industry is currently high, real humans are still required for assembly tasks, for example, during overhead tasks. This type of work can cause injuries in workers in this sector, especially musculoskeletal disorders (MSDs), being a cause for the inability to work in developed countries and, in turn, becoming a significant health problem. There is an aim to reduce the risk for these type of injuries during the development processes of this type of assembly operations. Various options are currently being considered where technology and the human factor can be combined. Among them, we find the object of study for this project, an exoskeleton.The aim of this project is to study the biomechanical effects as well as the ergonomics of a passive exoskeleton called Paexo Shoulder, developed by the company Ottobock, with the aim of relieving tensions in the shoulder joints and upper part of the shoulders, during its use in assembly tasks. For this purpose, an experiment will be designed in which several participants will carry out a series of tasks both with and without the exoskeleton, in such a way that the effects of its use and how they affect the users of the product can be observed. For this purpose, an experiment was designed to evaluate the effects of the use or non-use of this exoskeleton on 10 participants when performing a task similar to an overhead task in an assembly line. For the evaluation of the product, the Xsens motion capture system, in particular the Awinda model, was used together with the ScaleFit software to evaluate the results obtained through the motion capture recordings. In addition, in order to improve Digital Human Modelling (DHM) tools, the same task was simulated with the IPS-IMMA software, where the results were later analysed and compared with the motion capture results through ScaleFit.The results showed relatively large improvements in the respective moment reduction at the shoulder joint when using the exoskeleton. However, it was also observed that due to the upward force exerted by the exoskeleton on the arms, participants spent less time in low-risk areas evaluated by ScaleFit and therefore, this effect needs to be studied further.