At present, people already fully aware of how expensive it is energy dependence on fossil fuels. Trying to reduce this dependence goes hand in hand with environmental limits, which restrict the production of dangerous compounds. Biomass is a fuel that does not create large amounts of sulfur and carbon dioxide generated during combustion is in a closed cycle. Different types of biomass have different calorific value, and therefore different demands on the quantity needed to produce MWh. It is therefore necessary to choose the fuel with regard to the availability of in the site.

This thesis deals with the calculation of the boiler on stillage. Nowadays, when there's fossil fuels are just biomass seems adequate compensation. The great advantage of biomass boilers is a small amount of emissions, especially the greenhouse gas CO2. Of a given fuel composition is made thermal calculation and dimensioning of heat transfer surfaces of steam boilers. The resulting calculation must follow the parameters of steam at the outlet from the boiler.

The thesis is focused on the cooling cycles, namely cycles of absorption. The work is divided into several parts, as problems to be solved. The first part deals with the principles and using refrigeration cycles in practice, their involvement and by comparing the working pairs of substances circulating in the absorption unit. The practical part deals with making a proposal for one-and two-level modular absorption cycle of 6 kW, and the subsequent techno-economic comparison with commonly supplied absorption unit

To design a grate boiler with a natural circulation for burning of a pine bark with an output 18t/h is a primary objective of this dissertation. Individual parts of a boiler and it´s heat transfering surfaces were calculated after the working out of stoichiometric calculations from given element analysis of fuel. All computations have to fulfill several parameters: boliler output, temperature and pressure of an overheated steam.

The goal of this Master’s Thesis is to design a refuse derived fuel (RDF) fired steam boiler with 70 t/h processing ability. The assignment consists of requested output parameters of overheated steam and analysis of fuel components. This analysis was used for stoichiometric calculation of fuel. Furthermore, heat balance of the boiler was calculated, from which was determined the heat loss and the efficiency of the boiler. Individual designs and calculations of heating surfaces and boiler dimensions were carried out from requested output parameters.

The aim of this thesis is to propose a grate steam boiler for combustion of straw from wheat, rye and barley output of 20 t / h The calculation is performed by stoichiometric calculation of elemental analysis to calculate the dimensions of a boiler heating surfaces. Default superheated steam can be used mainly for electricity generation.

This master’s thesis deals with the issue of design heat recovery steam generator. In the first part is realized calculation of stoichiometry and further the thermal balance of the boiler. The boiler was divided on the basis of thermal analysis in two heating surfaces that have been designed separately. The thesis also includes structural design and drawings of evaporator, economizer and their compilation.

The aim of the thesis is the design of the steam grate boilers of 40 t/h for straw burning. The required parameters are generated steam temperature 420 ° C and a pressure of 5.5 MPa. The specified fuel is cereal straw with a calorific value of 9.5 MJ/kg. The calculation is made from the stoichiometric calculation of elemental analysis, to calculate the individual dimensions and heating surfaces of the boiler.

This master´s thesis is dealing with the thermal calculation and design of boilers for natural gas combustion. The aim is to design the heating surfaces, so as to meet the requirements of the steam temperature of 490 ° C, the pressure of 7 MPa and the steam output of 60 t/h.

Berners är en stor aktör inom försäljning och service av bilar och transportfordon i Jämtland och Västernorrland. På sina anläggningar i Sundsvall och Östersund tillhandahåller Berners bland annat biltvättar och rekond och dessa verksamheter ger upphov till stora utsläpp av vatten och kemikalier. För att minska utsläppen har Berners installerat indunstarrening, som är en reningsteknik som bygger på att smutsigt tvättvatten förångas och farliga partiklar faller ur. Med den här tekniken elimineras nästan alla kemikalieutsläpp och ungefär 90 procent av tvättvattnet återanvänds. Indunstarrening kräver mycket energi i form av el som i dagsläget köps in. Reningstekniken ger även upphov till spillvärme i både luft och vatten som i dagsläget inte utnyttjas. Syftet med arbetet är att undersöka potentiella förbättringsåtgärder för Berners biltvättar, för att göra de befintliga och eventuella framtida anläggningar bättre. Detta genom att undersöka möjligheterna av att utnyttja spillvärme och minska behovet av köpt el, genom egenproduktion av el med solceller. Målet är att genom detta ta fram underlag för Berners när de ska besluta om eventuella förändringar av de befintliga tvättarna samt vid byggnation av nya anläggningar. Underlaget ska bestå av resultat för minskade energibehov, minskade utsläpp, minskade behov av köpt el och livstidsbesparingar för förbättringsåtgärderna. I arbetet undersöktes tre olika förbättringsåtgärder. Installation av FTX-ventilation för att värma ingående luft till en angränsande lokal med utgående luft från det rum där indunstaren är placerad, installation av en plattvärmeväxlare för att värma vätskan i en radiatorkrets med utgående destillat från indunstaren samt installation av solceller för att minska behovet av köpt el till indunstaren. Monokristallina-, polykristallina- och tunnfilmssolceller samt olika storlekar av installerad area undersöktes. Minskade energibehov beräknades för FTX och VVX, minskade behov av köpt el beräknades för solceller och minskade utsläpp av koldioxidekvivalenter samt livstidsbesparingar beräknades för alla tre förbättringsåtgärderna. Resultaten visar på att en kombination av att installera FTX, VVX och polykristallina solceller genererar de största livstidsbesparingarna och de största utsläppsminskningarna. Installation av en plattvärmeväxlare för att ta vara på spillvärme i destillat är den enskilt bästa åtgärden för att minska energibehovet. Berners kan vid installation av en eller flera av de olika förbättringsåtgärderna minska energibehoven och utsläppen från biltvättarna, minska behovet av köpt el samtidigt som de kan spara pengar. / Berners is a major player in the sale and service of cars and transport vehicles in Jämtland and Västernorrland. At its facilities in Sundsvall and Östersund, Berners provides, among other things, car washes and auto reconditioning and these operations give rise to large discharges of water and chemicals. To reduce emissions, Berners has installed evaporator treatment, which is a treatment technique based on the evaporation of dirty washing water and the fallout of dangerous particles. With this technology, almost all chemical emissions are eliminated and approximately 90 percent of the washing water is reused. Evaporator cleaning requires a lot of energy in the form of electricity that is currently purchased. The treatment technology also gives rise to waste heat in both air and water, which is currently not used. The purpose of the work is to investigate potential improvement measures for Berner's car washes, to make the existing and possible future facilities better. This is done by investigating the possibilities of utilizing waste heat and reducing the need for purchased electricity, through own production of electricity with solar cells. The goal is to thereby produce a basis for Berners when they are to decide on any changes to the existing washes and when building new facilities. The basis shall consist of results for reduced energy needs, reduced emissions, reduced need for purchased electricity and lifetime savings for the improvement measures. The work examined three different improvement measures. Installation of FTX- ventilation to heat the incoming air to an adjacent room with outgoing air from the room where the evaporator is located, installation of a plate heat exchanger to heat the liquid in a radiator circuit with outgoing distillate from the evaporator and installation of solar cells to reduce the need for bought electricity for the evaporator. Monocrystalline, polycrystalline and thin film solar cells as well as different sizes of installed area were investigated. Reduced energy needs were calculated for FTX and VVX, reduced needs for purchased electricity were calculated for solar cells and reduced emissions of carbon dioxide equivalents as well as lifetime savings were calculated for all three improvement measures. The results show that a combination of installing FTX, VVX and polycrystalline solar cells generates the largest lifetime savings, as well as the largest emission reductions. Installing a plate heat exchanger to take advantage of waste heat in distillates is the single best measure to reduce energy needs. When installing one or more of the various improvement measures, Berners can reduce the energy needs and emissions from the car washes and reduce the need for purchased electricity, while at the same time saving money.