A specialized project of „Architectural study of modification of the bicycle stadium Favorit Brno in the BVV area and urban design of the Hněvkovský sports complex in Komárov“ preceded the diploma thesis. The aim of the project was preparation of the area for cycling stadium with all the necessary facilities and functional connections. The diploma thesis develops a previous project and elaborates the compound of the cycling stadium in a form of a study. The building should recpect to the current demands of this sport, such as a closed roof of the building, siberian pine track material and a 250-meter track length. The building will be situated in the area adjacent to the current biker complex in Brno Komárov.

The subject of my diploma thesis is the design of a new building "retirement home", a home with a special regime, in the form of project documentation for the construction. The building is partly basement with four above-ground floors and covered by a single-layer flat roof. On the first floor there are common, operational spaces and spaces for commercial use. The other above-ground floors are identical and serve as an accommodation. There is mostly technical background in the basement. The construction system is a wall bi-directional of brick masonry elements, with the exception of basement masonry, which is made of reinforced concrete. The object is based on foundation pads and strips. Ceiling structures are monolithic reinforced concrete. The whole building is insulated by contact insulation and has a ventilated facade.

This diploma thesis describes the design and elaboration of project documentation for realisation of construction of building of Guest house in municipality Ostravice. The building is situated on parcel 649/13 - arable land, in cadastral area Ostravice-1. Guest house is primarily intended for temporary accommodation of tourists in Beskydy mountains. The part of the building is restaurant as well as wellness centre with fitness gym. The building is situated in partially urbanised section of municipality. The access from the local road to parcel n. 470/20 to the main entrance into building will be enabled by newly purpose-built road with turnaround for passenger vehicles. The design respects the local plan and does not deviate from the character of the surrounding built-up area. The building has three above-ground floors and one underground floor, which is situated only under a part of the building. Project documentation is elaborated in conformity with effective laws, public notices and standards. Building of guesthouse is designed as wall system, with brick supporting walls made out of gas-silicate blocks and sand-lime bricks. The guest house is covered by two flat roofs with different inclination and with different height of ridges. The façade consists of stucco and for the third above-ground floor the façade is made out of ventilated larch-wood panelling. The building is placed in flat terrain.

This diploma thesis deals with construction-technological project of mixed-use building in Olomouc. The thesis contains a technical report, the coordination situation of the construction, the time and financial plan, the study of the main technological stages, the project of site equipment, the design of the main building machines and mechanisms, the time schedule, the budget, the technology prescription for the contact thermal insulation systém, the quality control and test plan, the plan of safety and the comparison of ETICS with polystyrene and mineral wool.

The aim of this diploma thesis is to design a mountain hotel in the village Rokytnice nad Jizernou. The object is placed on a sloping plot located in an attractive touristic and skiing area of mountain range Krkonoše. The mountain hotel has 4 floors and a basement. In the First floor there is a restaurant with a terrace, kitchen and administrative facilities of hotel. In the second and third floor we can find guest rooms and room for the hotel staff. In the basement there is wellness, technical facilities and garage compound. Construction of building is made of the reinforced concrete monolithic transverse frames with beam filling of ceramic block.

The subject of my diploma thesis is the design of a home for the elderly, a home with a special regime in the form of project documentation for the construction. The house is designed as stand-alone and wheelchair accessible. The building is partly basement, with four above-ground floors. On the first floor there are social and operational spaces of the home for seniors and there is also commercial use. The other above-ground floors include individual client rooms and operational background. The construction system of the whole building is a transverse wall. The building is based on concrete foundation. The external wall is made of clay block and the floor structure is made of cast-in-place reinforced slab. Basement loadbearing masonry is monolithic reinforced concrete. The staircase is a monolithic reinforced concrete and a lift is in the mirror of the staircase. The object is roofed with warm flat roof. Other part of this thesis is an assessment of building physics and fire safety requirements.

The diploma thesis is focused on a proposal and review of load-carrying steel structure of the airport terminal. The object is located in Zlín. It is a building of a rectangular plan with a ground plan dimensions of 75.0 x 54.0 m. The hall contains 10 main frames spaced by 6.0 m. The total height of the object is variable from 11.5 m to 19.9 m. The part of the construction is composite steel – concrete floor structure with a ground plan dimensions of 75.0 m x 27.0 m. The spatial rigidity of the construction is obtain by bracing. The cladding of the roof and the side walls is designed by sendwich panels, the cladding of the face walls is made by the glass facade system.

The diploma project designs architectural study of Intensive Urban Housing in the city of Brno, district Veveří. Its proposed a building of complex form on vacant site desined by Veveří, Kounicova, Pekárenská and Sokolská Streets which used to be a military grounds. Intensive Urban Housing includes wide community amenities and dwelling for different social groups. As it is located on within walking distance to services which makes the complex self-sufficient, the transport demands are reduced. The proposal works with differentiation of public space, main buildings volumes and facade arrangement that create a lovely city environment and new atractive location in the city of Brno.

This master´s thesis deals with a draft of a health centre building in Chlumec nad Cidlinou. The centre is situated on a corner building site with barrier-free access near the city centre. The building is designed with simple functional lines ground on foundation strips with flat green roof. The perimeter walls, internal load-bearing and shear walls are from vertically perforated T&G block bricks. Internal non-load-bearing prefab walls are coated with plasterboard. Ceiling constructions and an attic are made of monolithic reinforced concrete. The building envelope is insulated with mineral wool. Most of the perimeter walls are coated with breathable facade made of lacquered galvanized lamellas and minor part of walls is compositely insulated and plastered with a scratched facade plaster. The health centre building is notionally divided into two masses with a three-storey west part and two-storey east part of the building. Both parts are mutually connected by vertical communication space with elevator looped by counter clockwise three-flight staircase. Ambulant health care will be provided in total 9 consulting rooms, 3 ambulant care offices and private clinic with 3 consulting rooms. Independent business of the commercial area and café provide the additional function. The master´s thesis also includes assessments in terms of fire risk, energy saving and heat protection, acoustics and vibrations, lighting and sunlight.

The subject of the diploma thesis is the processing of the construction-technical part of the project documentation for the construction of a new kindergarden building in the town of Králíky. The building is divided into two parts - part of the kindergarten and part of the kitchen and laundry facilities. Part of the nursery school consists of three departments, communication space, multipurpose hall and administrative space. In the second part is a cloakroom for staff, kitchen with facilities, laundry and utility rooms. Both parts have separate main entrances. The building consists of two floors and one underground floor. Above part of the nursery school there is a sloping saddle roof structure consisting of wooden nailed trusses. Above the farm part there is a flat single-skin roof with a vegetation layer. The foundation structure under the walls of the building is formed by foundation strips, under the columns the foundation structure is formed by foundation feet. The vertical load-bearing structures are masonry from lime-sand masonry blocks in the above-ground part of the building and in the underground part of the building the vertical load-bearing structure is formed by fittings made of permanent formwork filled with reinforced concrete. Horizontal load-bearing structures are solved by prestressed cavity ceiling panels. The whole building is insulated. In the above-ground part of the nursery school is used contact thermal insulation system with pasty plaster, in the above-ground part of the remaining part of the building is used ventilated facade with fiber-cement facade boards