Currently, optical communications plays an important role in the transmission aspect of backbone fiber networks. However, there still remain two challenges in this field: one is the bottleneck between high-capacity local area networks (LANs) and the backbone network, where the answer is the broadband optical fiber access networks; the other is the bottleneck of low-speed electrical signal processing in high capacity optical networks, where one possible solution is all-optical nonlinear signal processing. This thesis will cover both of the two topics. In the first topic, the emphasis will be put on the novel optical access network infrastructure design to improve the access network reliability and functionality as well as the reduction of system complexity. In the second topic, the focus is how to utilize the newly-emerging photonic devices or newly-designed configurations to improve the performance of current optical signal processing subsystems for applications in lightwave transmission systems. / In summary, this thesis introduces a series of novel optical access network architecture designs and transmission system technologies for optical fiber communications and discusses their feasibilities in practice from the research perspective. We hope that these proposed technologies can contribute to the further developments in this field. / In the area of broadband optical fiber access networks, two aspects are considered: survivability and monitoring function. For the first part, several new network protection schemes among various access network topologies (i.e. tree and ring) are proposed and experimentally demonstrated, which could reduce the access network cost and simplifying the operation of the access network. For the second part, an interesting in-service fault surveillance scheme in the current TDM-PON is proposed via analyzing the composite radio-frequency (RF) spectrum of the common supervisory channel at the central office (CO). Experiment proves its effectiveness with negligible influence on the signal channels. In addition, a system demonstration of the WDM-based optical broadband access network with automatic optical protection function is presented, showing the potential of WDM technologies in the broadband optical access networks. / In the area of nonlinear optical signal processing, the technology innovation is in two areas: new architecture design and the new photonic devices. For the issue of architecture design, the focus is on the Nonlinear Optical Loop Mirror (NOLM) structure. A new polarization-independent OTDM demultiplexing scheme is proposed and demonstrated by incorporating a polarization-diversity loop into a conventional NOLM, which offers stable operation using the conventional components without sacrificing the operation speed or structural simplicity. In another study the design of a novel OFSK transmitter based on phase-modulator-embedded NOLM is conceived and implemented, which features data-rate transparent, continuous tuning of the wavelength spacing and stable operation. For the aspect of new photonic devices, this thesis focuses on the applications of photonic crystal fibers (PCF). In one work, a relatively short-length of dispersion-flattened high-nonlinearity PCF (gamma=11.2 (W-km)-1, D<-1 ps/nm/km 1500-1600 nm, S<1 x 10-3 ps/km/nm2) is integrated into a dispersion-imbalanced loop mirror (DILM) to form a nonlinear intensity discriminator and its application in the nonlinear suppression of the incoherent interferometric crosstalk has been successfully demonstrated. The special characteristics of the PCF ensure a broadband signal quality improvement and make the DILM more compact and stable. In the other work, the small birefringence of this PCF helps to simply achieve the polarization-insensitive wide-band wavelength converter based on four-wave-mixing in PCF. / Wang Zhaoxin. / "September 2006." / Advisers: Chinlon Lin; Chun-Kit Chan. / Source: Dissertation Abstracts International, Volume: 68-03, Section: B, page: 1846. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2006. / Includes bibliographical references (p. 93-101). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstracts in English and Chinese. / School code: 1307.

Optical communication networks are becoming the backbone of both national and international telecommunication networks. With the progress of optical communication systems, and the constraints brought by WDM transmissions and increased bit rates, new ways to convert the binary data signal on the optical carrier have been proposed. There are different factors that should be considered for the right choice of modulation format, such as information spectral density (ISD), power margin, and tolerance against group-velocity dispersion (GVD) and against fiber nonlinear effects like self-phase modulation (SPM), cross-phase modulation (XPM), four-wave mixing (FWM), and stimulated Raman scattering (SRS). In this dissertation, the several very important modulation formats such as Non Return to Zero (NRZ), Return to Zero (RZ), Chirped Return to Zero (CRZ), Carrier Suppressed Return to Zero (CSRZ), Differential Phase Shift Keying (PSK) and Carrier Suppressed Return to Zero- Differential Phase Shift Keying (CSRZ-DPSK) will be detailed and compared. In order to make performance analysis of such modulation formats, the simulation will be done by using VPItransmissionMakerTM WDM software.

Amplitude and Phase Shift Keying (APSK) format is one of the most attractive advanced modulation formats because of its good spectral efficiency. As the information bandwidth of the current optical fiber communication system is limited by the optical amplifier bandwidth, it is important to utilize the limited bandwidth effectively. This master thesis focuses on to study the transmission performance of the APSK format both theoretically and experimentally. At first, a theoretical study was conducted using a numerical simulation. As the Extinction Ratio (ER) of the Amplitude Shift Keying (ASK) signal affects the performances of both the ASK and the Phase Shift Keying (PSK) signals, the effect of the ER upon the transmission performance of the APSK format was studied. A clear trade-off between the performance of the ASK signal and the PSK signal due to the change of the ER was observed. Then, in order to improve the performance of the APSK format, a method to improve the transmission performance was proposed. This method was named as ¡§zero-nulling method¡¨, and it solved the trade-off issue caused by the ER. The effectiveness of this method was confirmed through the numerical simulation. Next, an experimental study was conducted. An experimental setup including 330km optical fiber transmission line was prepared, and it was used to confirm the results of the theoretical simulation. The performance trade-off between the ASK and the PSK signals due to the ER was confirmed experimentally. Finally, another experimental study was conducted. An experimental setup of 500km transmission line was used for this study. By adopting the recirculating loop experimental setup, the transmission length could be extended to a few thousand kilometers. The applicability of the ¡§zero-nulling method¡¨ was confirmed using this experimental setup.

Steady increases in the bandwidth requirements of access networks and local area networks have created a need for short-reach links supporting data rates of 10 Gb/s and larger. Server applications and data center applications too require such links. The primary challenge for these links lies in the reduction of the cost while retaining or improving the performance. Traditionally, multimode fiber (MMF) has satisfied these needs because of its low installation cost resulting from the alignment tolerance associated with the large core size. However, in view of the ever-increasing performance requirements, extraction of the best performance requires a holistic view of the channel that involves global optimization of transmitter, fiber, receiver performance and signaling strategies. The optimization results in a channel impairment mitigation technique that is a combination of optical, opto-electronic, and electronic methods. Both glass and plastic MMF links have been addressed in this work and many of the advances apply equally to both media. One example that applies strictly to glass MMF is the use of Raman amplification to not only combat attenuation but to reduce intersymbol interference (ISI). Raman amplification was demonstrated as an optical channel impairment mitigation technique enabling multi-km, multi-Gb/s transmission over glass-MMF. We demonstrated both numerically and experimentally that a power penalty reduction of 1.4 dBo can be achieved for 10 Gb/s transmission over 9 km of 62 micron glass MMF with a Raman pump power 250 mW. In recent years, plastic optical fiber (POF) has emerged as a potentially lower cost alternative to glass-MMF in enabling high performance links. The primary objective of this research is to explore the possibilities and develop low-cost, short-reach, high-data-rate POF-links. Using a comprehensive multimode fiber model, we showed that strong mode coupling, together with a reasonably accurate refractive index profile enables 40 Gb/s transmission over 200 m of graded-index POF. We experimentally demonstrated 40 Gb/s error-free transmission over 100 m of graded index perfluorinated POF (GI-PF-POF). We also demonstrated that even larger core (120 micron) GI-PF-POF can support >10 Gb/s over 100 m length. We numerically computed and experimentally measured the differential modal delay of GI-PF-POF to demonstrate that the available bandwidth is nearly independent of the launch conditions. Therefore, the alignment tolerance at the transmitter is increased resulting in a dramatically reduced packaging cost at the transmitter. However, the large-core POF increases the difficultly in capturing of the light efficiently onto a detector and results in optical power penalty and associated modal noise. To solve this, we have designed and developed a 10 Gb/s photoreceiver consisting of a large (100 micron diameter) GaAs PIN photodetector and a regulated cascade input based transimpedance amplifier (TIA) with low input impedance. Thus, a low-cost, alignment-tolerant, high-data-rate link is realized that uses a high-power, high-speed vertical cavity surface emitting laser (VCSEL) transmitter, large-core, high-speed GI-PF-POF, and the developed receiver.

In the past, radio-frequency signals were commonly used for low-speed wireless electronic systems, and optical signals were used for multi-gigabit wired communication systems. However, as the emergence of new millimeter-wave technology introduces multi-gigabit transmission over a wireless radio-frequency channel, the borderline between radio-frequency and optical systems becomes blurred. As a result, there come ample opportunities to design and develop next-generation broadband systems to combine the advantages of these two technologies to overcome inherent limitations of various broadband end-to-end interconnect systems in signal generation, recovery, synchronization, and so on. For the transmission distances of a few centimeters to thousands of kilometers, the convergence of radio-frequency electronics and optics to build radio-over-fiber systems ushers in a new era of research for the upcoming very-high-throughput broadband services. Radio-over-fiber systems are believed to be the most promising solution to the backhaul transmission of the millimeter-wave wireless access networks, especially for the license-free, very-high-throughput 60-GHz band. Adopting radio-over-fiber systems in access or in-building networks can greatly extend the 60-GHz signal reach by using ultra-low loss optical fibers. However, such high frequency is difficult to generate in a straightforward way. In this dissertation, the novel techniques of homodyne and heterodyne optical-carrier suppressions for radio-over-fiber systems are investigated and various system architectures are designed to overcome these limitations of 60-GHz wireless access networks, bringing the popularization of multi-gigabit wireless networks to become closer to the reality. In addition to the advantages for the access networks, extremely high spectral efficiency, which is the most important parameter for long-haul networks, can be achieved by radio-over-fiber signal generation. As a result, the transmission performance of spectrally efficient radio-over-fiber signaling, including orthogonal frequency division multiplexing and orthogonal wavelength division multiplexing, is broadly and deeply investigated. On the other hand, radio-over-fiber is also used for the frequency synchronization that can resolve the performance limitation of wireless interconnect systems. A novel wireless interconnects assisted by radio-over-fiber subsystems is proposed in this dissertation. In conclusion, multiple advantageous facets of radio-over-fiber systems can be found in various levels of end-to-end interconnect systems. The rapid development of radio-over-fiber systems will quickly change the conventional appearance of modern communications.

The ever-increasing data traffic demand drives the evolution of telecommunication networks, including the last-mile access networks as well as the long-haul backbone networks. This Ph.D. dissertation focuses on system design and signal processing techniques for next-generation converged optical-wireless access systems and the high-speed long-haul coherent optical communication systems. The convergence of high-speed millimeter-wave wireless communications and high-capacity fiber-optic backhaul networks provides tremendous potential to meet the capacity requirements of future access networks. In this work, a cloud-radio-over-fiber access architecture is proposed. The proposed architecture enables a large-scale small-cell system to be deployed in a cost-effective, power-efficient, and flexible way. Based on the proposed architecture, a multi-service reconfigurable small-cell backhaul network is developed and demonstrated experimentally. Additionally, the combination of high-speed millimeter-wave radio and fiber-optic backhaul is investigated. Several novel methods that enable high-spectral-efficient vector signal transmission in millimeter-wave radio-over-fiber systems are proposed and demonstrated through both theoretical analysis and experimental verification. For long-haul core networks, ultra-high-speed optical communication systems which can support 1Terabit/s per channel transmission will soon be required to meet the increasing capacity demand in the core networks. Grouping a number of tightly spaced optical subcarriers to form a terabit superchannel has been considered as a promising solution to increases channel capacity while minimizing the need for high-level modulation formats and high baud rate. Conventionally, precise spectral control at transmitter side is required to avoid strong inter-channel interference (ICI) at tight channel spacing. In this work, a novel receiver-side approach based on “super receiver” architecture is proposed and demonstrated. By jointly detecting and demodulating multiple channels simultaneously, the penalties associated with the limitations of generating ideal spectra can be mitigated. Several joint DSP algorithms are developed for linear ICI cancellation and joint carrier-phase recovery. Performance analysis under different system configurations is conducted to demonstrate the feasibility and robustness of the proposed joint DSP algorithms, and improved system performance is observed with both experimental and simulation data.

Thesis (M.S.)--University of Texas at El Paso, 2009. / Title from title screen. Vita. CD-ROM. Includes bibliographical references. Also available online.

As a promising candidate to break the single-mode fiber capacity limit, mode-division multiplexing (MDM) explores the spatial dimension to increase transmission capacity in fiberoptic communication. Two linear impairments, namely loss and multimode interference, present fundamental challenges to implementing MDM. In this dissertation, techniques to resolve these two issues are presented. To de-multiplex signals subject to multimode interference in MDM, Multiple-InputMultiple-Output (MIMO) processing using adaptive frequency-domain equalization (FDE) is proposed and investigated. Both simulations and experiments validate that FDE can reduce the algorithmic complexity significantly in comparison with the conventional time-domain equalization (TDE) while achieving similar performance as TDE. To further improve the performance of FDE, two modifications on traditional FDE algorithm are demonstrated. i) normalized adaptive FDE is applied to increase the convergence speed by 5 times; ii) masterslave carrier recovery is proposed to reduce the algorithmic complexity of phase estimation by number of modes. Although FDE can reduce the computational complexity of the MIMO processing, due to large mode group delay (MGD) of FMF link and block processing, the algorithm still requires enormous memory and high hardware complexity. In order to reduce the required tap length (RTL) of the equalizer, differential mode group delay compensated fiber (DMGDC) has been proposed. In this dissertation, the analytical expression for RTL is derived for DMGDC systems under the weak mode coupling assumption. Instead of depending on the overall MGD of the link iii in DMGD uncompensated (DMGDUC) systems, the RTL of DMGDC systems depend on the MGD of a single DMGDC fiber section. The theoretical and numerical results suggest that by using small compensation step-size, the RTL of DMGDC link can be reduced by 2 orders of magnitude compared to DMGDUC link. To compensate the loss of different modes, multimode EDFAs are presented with reconfigurable multimode pumps. By tuning the mode content of the multimode pump, modedependent gain (MDG) can be controlled and equalized. A proto-type FM-EDFA which could support 2 LP modes was constructed. The experimental results show that by using high order mode pumps, the modal gain difference can be reduced. By applying both multimode EDFA and equalization techniques, 26.4Tb/s MDM-WDM transmission was successfully demonstrated. A brief summary and several possible future research directions conclude this dissertation.

Coherent detection with subsequent digital signal processing (DSP) is developed, analyzed theoretically and numerically and experimentally demonstrated in various fiber-optic transmission scenarios. The use of DSP in conjunction with coherent detection unleashes the benefits of coherent detection which rely on the preservation of full information of the incoming field. These benefits include high receiver sensitivity, the ability to achieve high spectral-efficiency and the use of advanced modulation formats. With the immense advancements in DSP speeds, many of the problems hindering the use of coherent detection in optical transmission systems have been eliminated. Most notably, DSP alleviates the need for hardware phase-locking and polarization tracking, which can now be achieved in the digital domain. The complexity previously associated with coherent detection is hence significantly diminished and coherent detection is once again considered a feasible detection alternative. In this thesis, several aspects of coherent detection (with or without subsequent DSP) are addressed. Coherent detection is presented as a means to extend the dispersion limit of a duobinary signal using an analog decision-directed phase-lock loop. Analytical bit-error ratio estimation for quadrature phase-shift keying signals is derived. To validate the promise for high spectral efficiency, the orthogonal-wavelength-division multiplexing scheme is suggested. In this scheme the WDM channels are spaced at the symbol rate, thus achieving the spectral efficiency limit. Theory, simulation and experimental results demonstrate the feasibility of this approach. Infinite impulse response filtering is shown to be an efficient alternative to finite impulse response filtering for chromatic dispersion compensation. Theory, design considerations, simulation and experimental results relating to this topic are presented. Interaction between fiber dispersion and nonlinearity remains the last major challenge deterministic effects pose for long-haul optical data transmission. Experimental results which demonstrate the possibility to digitally mitigate both dispersion and nonlinearity are presented. Impairment compensation is achieved using backward propagation by implementing the split-step method. Efficient realizations of the dispersion compensation operator used in this implementation are considered. Infinite-impulse response and wavelet-based filtering are both investigated as a means to reduce the required computational load associated with signal backward-propagation. Possible future research directions conclude this dissertation.

京都大学 / 新制・課程博士 / 博士(情報学) / 甲第24937号 / 情博第848号 / 新制||情||142(附属図書館) / 京都大学大学院情報学研究科先端数理科学専攻 / (主査)教授 林 和則, 教授 青柳 富誌生, 准教授 寺前 順之介 / 学位規則第4条第1項該当 / Doctor of Informatics / Kyoto University / DFAM