No description available.

Diploma thesis is focused on manufacturing process of waveguide filter. Thesis is divided to 8 chapters. There is summarized theory of possible execution of waveguide filter, used materials, their influence and risks during production. Then are described possible steps of realization and necessary relations for its design, simulation and also practical realization. At conclusion are summarized, compared and described reached results.

Within modern frequency structures, the filter frequency region of up to 10 MHz constitutes a promising research topic that currently attracts intensive attention of specialists interested in the problem. The main reason of this fact consists in that the rapid development of modern technology allows the production of innovated structures of the analog frequency filters required in the defined band. In this context, however, it is also necessary to refine the methods applied in the synthesis and optimization of these structures; such improvement should be carried out with respect to fundamental properties and usability of today's active elements (operational amplifiers with voltage feedback whose Gain Bandwidth Product ranges within units of GHz, operational amplifiers with current feedback, conveyors, transimpedance operational amplifiers). In this thesis, active blocks of synthesis inductors (SIs) and frequency dependent negative resistors (FDNRs) are examined in detail, and the author provides novel formulas to define the basic parameters of the dual circuits. Due emphasis was placed on optimizing the basic building blocks of the second order and defining the variation of their properties caused by the addition of modern active elements. The blocks were analyzed and modified in view of their possible use in higher-order circuits. For active filters of a higher order, simulations were performed to indicate the actual sensitivity of the cascade and non-cascade ARC structures. The following phase of the research comprised mainly the designing of several filters, and this activity was further completed with the verification of the methodology for the synthesis and optimization of higher-order loss ladder filters with modern active blocks. Special attention was paid also to the methods enabling the optimization of such filters, which are invariably based on RLC prototypes. In order to verify the theoretical conclusions, the author materialized a large number of sample optimized filters and measured their parameters. The closing section of the thesis describes the use of the filters in specific applications.

This thesis deals with fully differential and pseudo-differential frequency filters. Significant emphasis is placed on the characteristics of common-mode signal. Further, the text deals with the design issue of fully-differential structure and transformation of non-differential to pseudo-differential structures. In the thesis one non-differential structure, one fully-differential and three pseudo-differential structures are proposed, one of them working in current mode. The thesis also describes the analysis from the perspective of non-ideal properties of the active element of two circuit solutions, which is trying to find the optimal solution. In each case, functionality of new solutions is verified by simulations and in several cases also by experimental measurement.