The innate immune system in vertebrates is considered to lack specific memory. To investigate innate immune system based immunological protection mediated by cells that are not part of the acquired immune system the Tübingen recombination activation gene1 (rag1)t26683 mutant (MT) zebrafish was chosen. Molecular analysis demonstrated MT zebrafish kidney cells expressed Non-specific Cytotoxic cell receptor protein-1 (NCCRP-1) and Natural Killer cell (NK) lysin but lacked T cell receptor (TCR) and immunoglobulin (Ig) VH1, VH2, VH3 and VH4 expression. Differential counts of peripheral blood leukocytes indicated that MT fish had decreased lymphocyte populations (34.7%) compared to rag1+/+ wild-type (WT) fish (70.5%), and increased granulocyte populations (34.7%) compared to WT (17.6%). Further, endocytic functions of phagocytes from MT fish were compared to WT fish. No significant differences in the selective and non-selective mechanisms of uptake in phagocytes were observed between MT and WT zebrafish. For the first time it was shown that zebrafish phagocytes utilize macropinocytosis and Ca2+ dependant endocytosis mechanisms for antigen uptake. These characterization studies suggest that MT zebrafish provide a unique model for investigating innate immune responses because fully functional innate defenses are present without the influence of lymphocytes and lymphocyte associated acquired immune responses. To conduct such large scale investigations the first ongoing rag1t26683 mutant zebrafish breeding colony was established. To meet special husbandry needs of immunodeficient MT zebrafish, standard rearing protocols were advanced and the information was made available to the zebrafish community at: http://www.cvm.msstate.edu/zebrafish/index.html. Multiple trials were conducted to evaluate the potential for memory of the innate immune system. Significant reduction in mortality was observed in MT vaccinated zebrafish upon secondary exposure to Edwardsiella ictaluri when compared to unvaccinated, MT fish. This documents for the first time, that MT zebrafish, lacking an acquired immune system, are able to mount a protective immune response to Edwardsiella ictaluri and generate protection upon a repeated encounter to the same pathogen. The observed protection is long lasting and mediated by the innate immune system, but a specific mechanism is not yet defined.

No description available.

La cartographie peptidique est une méthode qui permet entre autre d’identifier les modifications post-traductionnelles des protéines. Elle comprend trois étapes : 1) la protéolyse enzymatique, 2) la séparation par électrophorèse capillaire (CE) ou chromatographie en phase liquide à haute performance (HPLC) des fragments peptidiques et 3) l’identification de ces derniers. Cette dernière étape peut se faire par des méthodes photométriques ou par spectrométrie de masse (MS). Au cours de la dernière décennie, les enzymes protéolytiques immobilisées ont acquis une grande popularité parce qu’elles peuvent être réutilisées et permettent une digestion rapide des protéines due à un rapport élevé d’enzyme/substrat. Pour étudier les nouvelles techniques d’immobilisation qui ont été développées dans le laboratoire du Professeur Waldron, la cartographie peptidique par CE est souvent utilisée pour déterminer le nombre total de peptides détectés et leurs abondances. La CE nous permet d’avoir des séparations très efficaces et lorsque couplée à la fluorescence induite par laser (LIF), elle donne des limites de détection qui sont 1000 fois plus basses que celles obtenues avec l’absorbance UV-Vis. Dans la méthode typique, les peptides venant de l’étape 1) sont marqués avec un fluorophore avant l’analyse par CE-LIF. Bien que la sensibilité de détection LIF puisse approcher 10-12 M pour un fluorophore, la réaction de marquage nécessite un analyte dont la concentration est d’au moins 10-7 M, ce qui représente son principal désavantage. Donc, il n’est pas facile d’étudier les enzymes des peptides dérivés après la protéolyse en utilisant la technique CE-LIF si la concentration du substrat protéique initial est inférieure à 10-7 M. Ceci est attribué à la dilution supplémentaire lors de la protéolyse. Alors, afin d’utiliser le CE-LIF pour évaluer l’efficacité de la digestion par enzyme immobilisée à faible concentration de substrat,nous proposons d’utiliser des substrats protéiques marqués de fluorophores pouvant être purifiés et dilués. Trois méthodes de marquage fluorescent de protéine sont décrites dans ce mémoire pour étudier les enzymes solubles et immobilisées. Les fluorophores étudiés pour le marquage de protéine standard incluent le naphtalène-2,3-dicarboxaldéhyde (NDA), la fluorescéine-5-isothiocyanate (FITC) et l’ester de 6-carboxyfluorescéine N-succinimidyl (FAMSE). Le FAMSE est un excellent réactif puisqu’il se conjugue rapidement avec les amines primaires des peptides. Aussi, le substrat marqué est stable dans le temps. Les protéines étudiées étaient l’-lactalbumine (LACT), l’anhydrase carbonique (CA) et l’insuline chaîne B (INB). Les protéines sont digérées à l’aide de la trypsine (T), la chymotrypsine (CT) ou la pepsine (PEP) dans leurs formes solubles ou insolubles. La forme soluble est plus active que celle immobilisée. Cela nous a permis de vérifier que les protéines marquées sont encore reconnues par chaque enzyme. Nous avons comparé les digestions des protéines par différentes enzymes telles la chymotrypsine libre (i.e., soluble), la chymotrypsine immobilisée (i.e., insoluble) par réticulation avec le glutaraldéhyde (GACT) et la chymotrypsine immobilisée sur billes d’agarose en gel (GELCT). Cette dernière était disponible sur le marché. Selon la chymotrypsine utilisée, nos études ont démontré que les cartes peptidiques avaient des différences significatives selon le nombre de pics et leurs intensités correspondantes. De plus, ces études nous ont permis de constater que les digestions effectuées avec l’enzyme immobilisée avaient une bonne reproductibilité. Plusieurs paramètres quantitatifs ont été étudiés afin d’évaluer l’efficacité des méthodes développées. La limite de détection par CE-LIF obtenue était de 3,010-10 M (S/N = 2,7) pour la CA-FAM digérée par GACT et de 2,010-10 M (S/N = 4,3) pour la CA-FAM digérée par la chymotrypsine libre. Nos études ont aussi démontrées que la courbe d’étalonnage était linéaire dans la région de travail (1,0×10-9-1,0×10-6 M) avec un coefficient de corrélation (R2) de 0,9991. / Peptide mapping is a routine method for identifying post-translational modifications of proteins. It involves three steps: 1) enzymatic proteolysis, 2) separation of the peptide fragments by capillary electrophoresis (CE) or high performance liquid chromatography (HPLC), 3) identification of the peptide fragments by photometric methods or mass spectrometry (MS). During the past decade, immobilized enzymes for proteolysis have been gaining in popularity because they can be reused and they provide fast protein digestion due to the high ratio of enzyme-to-substrate. In order to study new immobilization techniques developed in the Waldron laboratory, peptide mapping by CE is frequently used, where the total number of peptides detected and their abundance are related to enzymatic activity. CE allows very high resolution separations and, when coupled to laser-induced fluorescence (LIF), provides excellent detection limits that are 1000 times lower than with UV-Vis absorbance. In the typical method, the peptides produced in step 1) above are derivatized with a fluorophore before separation by CE-LIF. Although the detection sensitivity of LIF can approach 10 12 M for a highly efficient fluorophore, a major disadvantage is that the derivatization reaction requires analyte concentrations to be approx. 10 7 M or higher. Therefore, it is not feasible to study enzymes using CE-LIF of the peptides derivatized after proteolysis if the initial protein substrate concentration is <10-7 M because additional dilution occurs during proteolysis. Instead, to take advantage of CE-LIF to evaluate the efficiency of immobilized enzyme digestion of low concentrations of substrate, we propose using fluorescently derivatized protein substrates that can be purified then diluted. Three methods for conjugating fluorophore to protein were investigated in this work as a means to study both soluble and immobilized enzymes. The fluorophores studied for derivatization of protein standards included naphthalene-2,3-dicarboxaldehyde (NDA), fluoresceine-5-isothiocyanate (FITC) and 6-carboxyfluorescein N-succinimide ester (FAMSE). The FAMSE was found to be an excellent reagent that conjugates quickly with primary amines and the derivatized substrate was stable over time. The studied substrates were -lactalbumin (LACT), carbonic anhydrase (CA) and insulin chain-B (INB). The CE-LIF peptide maps were generated from digestion of the fluorescently derivatized substrates by trypsin (T), chymotrypsin (CT) or pepsin (PEP), either in soluble or insoluble forms. The soluble form of an enzyme is more active than the immobilized form and this allowed us to verify that the conjugated proteins were still recognized as substrates by each enzyme. The digestion of the derivatized substrates with different types of chymotrypsin (CT) was compared: free (i.e., soluble) chymotrypsin, chymotrypsin cross-linked with glutaraldehyde (GACT) and chymotrypsin immobilized on agarose gel particles (GELCT), which was available commercially. The study showed that, according to the chymotrypsin used, the peptide map would vary in the number of peaks and their intensities. It also showed that the digestion by immobilized enzymes was quite reproducible. Several quantitative parameters were studied to evaluate the efficacy of the methods. The detection limit of the overall method (CE-LIF peptide mapping of FAM-derivatized protein digested by chymotrypsin) was 3.010-10 M (S/N = 2.7) carbonic anhydrase using insoluble GACT and 2.010-10 M (S/N = 4.3) CA using free chymotrypsin. Our studies also showed that the standard curve was linear in the working region (1.0×10-9-1.0×10-6 M) with a correlation coefficient (R2) of 0.9991.

No description available.

An implantable closed-loop insulin delivery device (INsmart device) containing a glucose responsive gel has been developed within the INsmart research group, over a period of 10 years, to mimic pancreas. In this thesis, the reliability and performance capability of the INsmart device was studied for future clinical use. Investigations into the device material compatibility with insulin solution, assessed by monitoring insulin loss and degradant formation over a period of 31 days using RP-HPLC have shown that stainless steel and titanium are the most compatible materials. Polycarbonate contributes to insulin loss after 11 days, resin might not be the best material and polyurethane is the least compatible for future device designs. To study insulin delivery mechanism and kinetics from the device, fluorescently labelled human insulin (FITC-insulin) was synthesised and characterised using RP-HPLC and MS, to produce a product with predominantly di-labelled conjugate (>75%) with no unreacted FITC or native insulin. Clinically used insulin analogues were also fluorescently labelled to produce predominantly di-labelled FITC-insulin conjugate with potential future biological and in vitro applications. The drug release mechanism from the glucose sensitive gel held in the INsmart device, studied using fluorescein sodium was determined as a Fickian diffusion controlled release mechanism. The diffusion coefficient (D) for FITC-insulin in the non-polymerised dex2M-conA gel (NP gel) determined using mathematical models, QSS and TL slope methods was 1.05 ± 0.02 x 10-11 m2/s and in the cross-linked dex500MA-conAMA gel (CL gel) was 0.75 ± 0.06 x 10-11 m2/s. In response to physiologically relevant glucose triggers in the NP gel, the diffusivity of FITC-insulin increases with increasing glucose concentrations, showing a second order polynomial fit, device thus showing glucose sensitivity and graded response, mimicking pancreas. Rheological measurements further confirmed the gel glucose responsiveness demonstrated by a third order polynomial fit between FITC-insulin D and the NP complex viscosity in response to increasing glucose concentration. The knowledge of FITC-insulin diffusion kinetics in the gel has aided in making some theoretical predictions for the capability and performance of the INsmart device. Alternate device geometry and design optimisation is also explored.

Membrane filtration processes are widely utilized across different industrial sectors for biological and environmental separations. Examples of the former are sterile filtration and protein fractionation via microfiltration (MF) and ultrafiltration (UF) while drinking water treatment, tertiary treatment of wastewater, water reuse and desalination via MF, UF, nanofiltration (NF) and reverse-osmosis (RO) are examples of the latter. A common misconception is that the performance of membrane separation is solely dependent on the membrane pore size, whereas a multitude of parameters including solution conditions, solute concentration, presence of specific ions, hydrodynamic conditions, membrane structure and surface properties can significantly influence the separation performance and the membrane’s fouling propensity. The conventional approach for studying filtration performance is to use a single lab- or pilot-scale module and perform numerous experiments in a sequential manner which is both time-consuming and requires large amounts of material. Alternatively, high-throughput (HT) techniques, defined as the miniaturized version of conventional unit operations which allow for multiple experiments to be run in parallel and require a small amount of sample, can be employed. There is a growing interest in the use of HT techniques to speed up the testing and optimization of membrane-based separations. In this work, different HT screening approaches are developed and utilized for the evaluation and optimization of filtration performance using flat-sheet and hollow-fiber (HF) membranes used in biological and environmental separations. The effects of various process factors were evaluated on the separation of different biomolecules by combining a HT filtration method using flat-sheet UF membranes and design-of-experiments methods. Additionally, a novel HT platform was introduced for multi-modal (constant transmembrane pressure vs. constant flux) testing of flat-sheet membranes used in bio-separations. Furthermore, the first-ever HT modules for parallel testing of HF membranes were developed for rapid fouling tests as well as extended filtration evaluation experiments. The usefulness of the modules was demonstrated by evaluating the filtration performance of different foulants under various operating conditions as well as running surface modification experiments. The techniques described herein can be employed for rapid determination of the optimal combination of conditions that result in the best filtration performance for different membrane separation applications and thus eliminate the need to perform numerous conventional lab-scale tests. Overall, more than 250 filtration tests and 350 hydraulic permeability measurements were performed and analyzed using the HT platforms developed in this thesis. / Thesis / Doctor of Philosophy (PhD) / Membrane filtration is widely used as a key separation process in different industries. For example, microfiltration (MF) and ultrafiltration (UF) are used for sterilization and purification of bio-products. Furthermore, MF, UF and reverse-osmosis (RO) are used for drinking water and wastewater treatment. A common misconception is that membrane filtration is a process solely based on the pore size of the membrane whereas numerous factors can significantly affect the performance. Conventionally, a large number of lab- or full-scale experiments are performed to find the optimum operating conditions for each filtration process. High-throughput (HT) techniques are powerful methods to accelerate the pace of process optimization—they allow for multiple experiments to be run in parallel and require smaller amounts of sample. This thesis focuses on the development of different HT techniques that require a minimal amount of sample for parallel testing and optimization of membrane filtration processes with applications in environmental and biological separations. The introduced techniques can reduce the amount of sample used in each test between 10-50 times and accelerate process development and optimization by running parallel tests.