The master thesis designs a mixed-use building in Ledeč nad Sázavou. The thesis consists of three parts. First part presents the project documentation of architectural-construction. Second part proposes the technical equipment of the building. Third part is assessment of the designed building by methodology for multicriteria evaluation of buildings SBToolCZ. The building is located in undeveloped and slightly sloping land. The building has three above-ground floors. There are three different operations in the building, which are a café and an electrical shop and an office part. There is a café, an electrical shop, technical and storage facilities on the first floor. The second and third floor is an office part and company apartment. Structurally, the building is solved by a two-wax load bearing system. The building is founded on footing and foundation slab. Load bearing vertical elements are walls, columns and posts. Externall wall is designed from ceramics block with and mineral insulation. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. The building has a flat roof. In the building is air condition and cooling system and heating. Part of electricity demand is covered by photovoltaics on the roof. All drawings and visualization are designes in software ArchiCAD.

The topic of this diploma thesis is the preparation of the realization of the production hall of the company Tescan. The thesis contains a technical report on the construction technology project, the coordination situation, the time and financial plan of the construction. Furthermore, the project addresses the design of construction site equipment and machinery for each stage, the schedule of the main building, the plan of its supply of materials for the rough construction and technological regulations for the substructure of the building, to which the inspection and test plan applies. The next assignment deals with the budget of the main building, health and safety plan and the issue of formwork needed for implementation. The specialization in the area deals with the design and assessment of industrial floors and solutions for securing a construction pit.

The diploma thesis is about design and project documentation of fitness and wellness center. The designed object is situated in the outskirts of Havlíčkův Brod in a quiet environment and with direct connection to the city dam. The object is a three-storey partially-basement building with a flat green roof in three levels. The building is based on the base passages of plain concrete, reinforced concrete slabs and beads. The supporting, peripheral and partition walls are designed from the VELOX system. The outer casing consists of cement slab, reinforced concrete core and thermal insulation. In open-plan areas there are designed reinforced concrete columns. The ceiling structure is predominantly designed from reinforced concrete slabs to lost formwork. Part of the facade is plastered, the other part is ventilated. Individual architectural elements divide the object into units and fit into the natural landscape. The object is divided into several tracts where each has its own purpose and specification. In the 1st floor there is a gym, room for trainers and coordinating training room. In the center there is atrium, reception, cloakroom, buffet and public toilets. Vertical communication is possible using a suspended staircase or a hydraulic lift. On the 1st underground floor there is a reception desk and cloakroom for disabled people. In the western part of the tract there is an indoor pool with whirlpool, of course there are cloakrooms divided for men and women. The eastern part of the tract is used as a technical room of air-conditioning, there are also 3 saunas, including a relaxation room and dressing room. All facilities on the 1st underground floor have access to an outdoor park, including a dam and outdoor whirlpools. In the 2nd floor there is a staffing facility, an area for manegement, technical rooms and an outdoor green terrace. The designed object is designed for disabled people. Around the object there is designed a car park for 33 cars.

Diploma thesis designs a barrier free new building of medical devices – policlinic (health center) with 14 medical workplaces. Object has three floors and basement. The building is covered by a vegetation flat roof. Building of policlinic is based on strip foundations and load-bearing walls are made from sand-lime blocks. Horizontal systém is created like reinforced concrete ceiling and in the same way internal staircase. The building is design at passive architecture – have compact form, thick layer of insulation and airtight cover. The main glass facade is oriented to the sout. There is used heat recovery air conditioning and heat pumping for heating in building. Health center satisfy currently legislation.

The aim of this work is the processing of the technological project for the ,,Skladová hala v Měříně“, which addresses the preparation and organization of construction. Construction technology the project involves the processing of time plans, economic evaluation, design of pumping sources for construction, working procedures, construction site equipment, and design of major machines and mechanisms. Further, it is processed a detailed technological regulation and inspection and test plan for a prefabricated reinforced concrete skeleton. All technological procedures are processed with regard to work safety and environment.

The thesis deals with the preparation of the implementation and management of building central dispatching of rail traffic management Prague. The thesis contains the selected part of building technological project together with appropriate drawings. The project addresses mainly the rough construction of the mainbuilding.The aim of this thesis is to design appropriate and effective way of realization of construction depending on local conditions.

The topic of the master thesis is new medico-social facility hospice St. Michaela. The purpose of the object is the maximizing of improvement in the quality of life of dying, severely ill and incurable patients, with the use of palliative care. The construction follows the Complex of Regional Hospital Náchod. Together with as a retirement home Náchod completes a support network of health and social care. The building is designed as a four-building storey and is partially embedded into the sloping terrain. Floors are divided into individual facilities and together constitute a functional unit. In the basement is the technical room, warehouses, garages and kitchen facilities. On the ground floor are then socio-public rooms and facilities. On the second floor is located hedmaster of hospice and accommodation area. The third floor is devoted to the accommodation area. The proposed structure made of brick longitudinal system, supplemented by concrete basement walls. The horizontal structure is made of filigree ceiling panels. Stairs are designed as a precast concrete and steel. Individual roof structures is made from unwalkable, walkable and vegetation compositions. The cladding consists of ventilated facade of glass and wooden panels. Foundations are designed from the lineal foundation.

"The sick body needs a doctor friend sick souls." (Menandros)