Este trabalho apresenta uma contribuição ao estudo das flutuações quânticas dos feixes sonda e de bombeio na condição de transparência induzida por laser. Com esse estudo conseguimos observar nas flutuações dos campos uma manifestação do caráter coerente da interação dos átomos com os feixes. Para alcançar nosso objetivo, derivamos a teoria do fenômeno da transparência induzida tratando ambos feixes dentro do formalismo quântico. Com tal formulação, encontramos que a condição de transparência induzida corresponde a um estado de equilíbrio dinâmico do sistema átomo - campo de bombeio - campo sonda onde, os átomos redistribuem os fótons entre os campos, correlacionando os mesmos e alterando, ao mesmo tempo, as propriedades estatísticas desses feixes. Utilizando dois critérios diferentes, mostrando que a correlação entre os feixes sonda e de bombeio é de natureza quântica, o que possibilita a aplicação desse sistema, por exemplo, na informação e computação quânticas. Os resultados experimentais obtidos confirmaram as previsões teóricas em relação às flutuações quânticas dos campos, e a existência de uma correlação entre eles. Trata-se da primeira investigação experimental de propriedades estatísticas dos campos em transparência induzida. A correlação de intensidade medida é o primeiro passo para a observação de emaranhamento entre feixes sonda e de bombeio na condiçào de transparência induzida. / In this work we presente a contribution to the study of quantum fluctuations of pump and probe filds in the Electromagnetically Induced Transparency (EIT) condition. We observed in the fields fluctuations evidence of the coherent character of the interaction between the atoms and the fields. To reach our purpose, the fields were treated quantum-mechanically in deriving the theory of the EIT phenomenon. Using this formulation, we concluded that the EIT condition corresponds to a state of dynamical equilibrium of the system atom pump field probe field, where the atoms redistribute the photons between both fields, correlating them and, at the same time, affecting their statistical properties. By means of two different criteria we showed that such a correlation is of quantum nature, making possible the application of this system in, for example, quantum information and quantum computation. The theoretical predictions were corroborated by our experimental results regarding the quantum fluctuations and the existence of a correlation between the pump and probe fields. This is the first experiment to investigate statistical properties of the fields in EIT. The intensity correlation measured is the first step towards the observation of entanglement between the fields.

Ces travaux de thèse concernent l’étude de l’ensemble de la chaîne de puissance d’un système hydrolien utilisant des systèmes de stockage d’énergie pour améliorer la qualité de la puissance produite et la capacité de gestion des échanges d’énergie. Dans un premier temps, les différentes technologies de stockage d’énergie et leurs applications pour lisser les fluctuations de la puissance produite par le système hydrolien sont étudiées et comparées. Ensuite, une stratégie de lissage des fluctuations de la puissance, dues à l’effet de houle (fluctuations de courte durée), est proposée : elle associe une stratégie MPPT avec filtrage (au niveau de la génératrice) à l’utilisation de supercondensateurs pour lisser la puissance injectée au réseau. Puis il est proposé d’utiliser des batteries à circulation d’électrolyte pour la gestion quotidienne de la puissance d’une hydrolienne dans le contexte d’un réseau électrique isolé. Un système hybride hydrolien/batteries/diesel est étudié pour deux configurations simples : le cas d’une alimentation avec une hydrolienne comme sources principales et le cas où les générateurs diesels sont considérés comme sources dominantes. Enfin, des stratégies de limitation de puissance basées sur le défluxage de la génératrice pour contrôler la puissance de l’hydrolienne dans le cas de vitesses de courants marins élevées sont proposées. Dans ce contexte, le contrôle à puissance constante et à puissance maximale en cours de défluxage sont comparés. L’influence des paramètres de la génératrice sur les caractéristiques de fonctionnement commun de la turbine et la génératrice est également étudiée. / This PhD thesis models the whole power chain of a marine current turbine (MCT) system and investigates the use of energy storage devices to improve power quality and energy management capability. First, various energy storage technologies concerning their applications to address the power fluctuation phenomena in tidal current generation system are reviewed and compared. Then, a two-stage power smoothing control strategy for compensating swell-induced short-time fluctuations is proposed. The proposed control strategy uses a modified MPPT with filter strategy on the generator-side and supercapacitors on the grid-side for injecting a smoothed power to the grid. Afterwards, a flow battery system for daily energy management of a hybrid MCT/battery/diesel system is proposed. The MCT dominant power supply case and an island power supply (with diesel generators as the main source) are investigated. Finally, power limitation controls with a robust flux-weakening strategy for a PMSG-based non-pitchable MCT system are proposed for over-rated marine current speed periods. In this context, the constant power control and maximum power control modes at the flux-weakening stage are compared; and the influence of the generator parameters on the joint operating characteristics of the turbine and generator are also discussed.

L'objectif sous-jacent aux trois chapitres qui composent cette thèse est la compréhension du fonctionnement du marché du travail, afin d'établir un diagnostic quant au rôle de régulation potentiel d'une autorité publique dans ce marché. Dans le premier chapitre, j'analyse, d'un point de vue purement "positif", la capacité du modèle avec frictions d'appariement à répliquer les fluctuations de court terme de variables du marché du travail aux États-Unis. Je propose une nouvelle stratégie de calibration, dans le cadre d'analyse est celui d'un modèle de fluctuations avec rigidité de prix. Dans le deuxième chapitre (co-écrit avec F. Langot), nous étudions les déterminants des évolutions de l'offre de travail sur les cinquante dernières années. L'évolution du coin fiscal, ainsi que de deux variables reflétant le cadre institutionnel (la générosité du revenu en cas de "non-emploi" et le pouvoir de négociation des travailleurs), permettent d'expliquer les différentes trajectoires du taux d'emploi et des heures travaillées observées aux États-Unis et dans trois économies européennes (France, Allemagne et Royaume-Uni). Dans le troisième chapitre, j'analyse la performance de deux systèmes alternatifs de sécurité sociale, dans le cadre d'un modèle avec agents hétérogènes en termes de richesse. Les agents sont soumis à un risque de chômage, et le planificateur peut fournir de l'assurance à travers un système fiscal redistributif, basé sur une taxe progressive et/ou l'assurance chômage. Le système fiscal progressif est supérieur, en termes de bien-être agrégé, à l'assurance fournie à travers des allocations chômage, à travers son effet sur le fonctionnement du marché du travail. / The objective underlying the three chapters of this thesis is the understanding of the functioning of the labor market to make a diagnosis about the potential regulatory role of a public authority in this market. ln the first chapter, I analyze, from a purely "positive" point of view, the ability of the model with search and matching frictions to reproduce short-term fluctuations of labor market variables in the United States. I propose a new calibration strategy, within a general equilibrium framework with sticky prices. In the second chapter (co-written with F. Langot), we study the determinants of changes in the labor supply over the last fifty years. Changes in the tax wedge, and two variables reflecting the institutional framework (the generosity of income in case of "non-employment" and workers' bargaining power), can explain the different trajectories of the rate employment and hours worked observed in the United States and three European economies (France, Germany and the United Kingdom). ln the third chapter, I analyze the performance of two alternative systems of social security, within the framework of a model with heterogeneous agents in terms of wealth. The agents are subject to a risk of unemployment, and the planner can provide insurance through a redistibutive tax system, based on a progressive tax and / or unemployment insurance. The progressive tax system is superior in terms of aggregate welfare to the insurance provided through unemployment benefits, through its effect on the functioning of the labor market.

Les transitions de phase près d'un point critique - dites du second ordre - sont un sujet toujours d'actualité en raison des nombreux phénomènes critiques intéressants tels que la force de Casimir critique, les problèmes de confinements ou les phénomènes hors d'équilibre suivant une trempe au point critique. Cette thèse vise à étudier expérimentalement certains phénomènes engendrés près d'un point critique. La thèse est divisée en deux axes : le premier consiste à développer plusieurs systèmes expérimentaux qui permettront de mesurer essentiellement la viscosité, par l'intermédiaire des fluctuations thermiques à l'échelle micrométrique. Le deuxième axe consiste à trouver et caractériser des mélanges binaires présentant une transition de phase du second ordre dans lesquelles on souhaite faire des mesures. Les enjeux de ces systèmes expérimentaux sont d'avoir une régulation en température précise, une sonde de mesure sensible aux fluctuations thermiques et/ou à des forces de l'ordre du pN, et un échantillon fiable et reproductible présentant un point critique accessible expérimentalement. Nous avons ainsi monté à partir d'un microscope à force atomique (AFM) déjà présent au laboratoire, un système de mesure de viscosité à sonde AFM fibrée. Malgré sa faible efficacité en terme de sonde de mesure métrologique, nous avons pu décrire et développer un modèle de couplage de modes de vibration permettant de comprendre la mécanique de microleviers AFM fibrés. J'ai également développé au laboratoire la mesure de microscopie dynamique différentielle qui permet de faire des mesures à sondes multiples contrairement au premier montage. J'ai discuté de la précision de la mesure dans le cadre de notre objectif d'étude des fluctuations critiques. En ce qui concerne l'échantillon de mesure, nous avons étudié plusieurs mélanges binaires que nous avons caractérisés par des méthodes classiques de turbidité et diffusion statique de la lumière. Cette caractérisation nous a permis de connaître les mélanges binaires pour les utiliser dans un troisième système de mesure : billes micrométriques piégées dans des pinces optiques déjà monté au laboratoire. Nous y avons rajouté un système de régulation thermique fait maison pour être exploité avec les contraintes de la pince optique. Ces tests ont fait apparaître un phénomène inattendu d'oscillations de transition de phase induites par laser. Nous avons développé un modèle pour les décrire. Enfin, des expériences préliminaires - toujours avec les pinces optiques dans les mélanges binaires - nous ont permis d'observer qualitativement des effets de l'approche au point critique par des mesures de viscosité et d'interaction type force de Casimir critique. / Phase transitions near a critical point, or second order phase transitions, are still a recent object of studies because of the large amount of interesting critical phenomena as the critical Casimir force, confinements problems or out of equilibrium phenomena following a quench at the critical point. This thesis experimentally studies phenomena near a critical point. This manuscript is divided in two parts : the first one consists in building several experimental set-up which measure viscosity through thermal fluctuation at micrometric scale. The second part consists in finding and characterize binary mixtures which show a second order phase transition. Preliminary results have been done in these samples. One of the principal points of these experimental set-up are a well regulated temperature, a probe sensitive to thermal fluctuation and/or pN forces and a reproducible binary mixture which presents a critical point easy to reach experimentally. We mounted from an Atomic Force Microscope (AFM) already built in the laboratory, a hanging-fiber probe to measure viscosity of liquids. Despite its weak efficiency as a metrologic probe, we described and developed a mode coupling model which let us understand mechanics of hanging-fiber probes. I also developed in the lab the dynamic differential microscopy technique (DDM) which do measurements with several probes. I discussed about the measure precision with in mind the aim of studying critical fluctuations. For the choice of the sample, we studied several binary mixtures. We characterized them by classical methods as turbidity measurements and static light scattering. These characterizations let us learn about binary mixtures in order to use them in a third experimental set-up : beads trapped in an optical tweezers already built in the lab. We added to it a home-made thermal regulation which can be used with the constraints of optical tweezers. These tests showed an unexpected phenomenon of oscillating phase transition induce by laser. We developed a model to describe it. At last, preliminary experiments with optical tweezers in binary mixtures showed qualitative effects of an approach near a critical point on the viscosity and on interactions between beads as critical Casimir force.

Este trabalho apresenta uma contribuição ao estudo das flutuações quânticas dos feixes sonda e de bombeio na condição de transparência induzida por laser. Com esse estudo conseguimos observar nas flutuações dos campos uma manifestação do caráter coerente da interação dos átomos com os feixes. Para alcançar nosso objetivo, derivamos a teoria do fenômeno da transparência induzida tratando ambos feixes dentro do formalismo quântico. Com tal formulação, encontramos que a condição de transparência induzida corresponde a um estado de equilíbrio dinâmico do sistema átomo - campo de bombeio - campo sonda onde, os átomos redistribuem os fótons entre os campos, correlacionando os mesmos e alterando, ao mesmo tempo, as propriedades estatísticas desses feixes. Utilizando dois critérios diferentes, mostrando que a correlação entre os feixes sonda e de bombeio é de natureza quântica, o que possibilita a aplicação desse sistema, por exemplo, na informação e computação quânticas. Os resultados experimentais obtidos confirmaram as previsões teóricas em relação às flutuações quânticas dos campos, e a existência de uma correlação entre eles. Trata-se da primeira investigação experimental de propriedades estatísticas dos campos em transparência induzida. A correlação de intensidade medida é o primeiro passo para a observação de emaranhamento entre feixes sonda e de bombeio na condiçào de transparência induzida. / In this work we presente a contribution to the study of quantum fluctuations of pump and probe filds in the Electromagnetically Induced Transparency (EIT) condition. We observed in the fields fluctuations evidence of the coherent character of the interaction between the atoms and the fields. To reach our purpose, the fields were treated quantum-mechanically in deriving the theory of the EIT phenomenon. Using this formulation, we concluded that the EIT condition corresponds to a state of dynamical equilibrium of the system atom pump field probe field, where the atoms redistribute the photons between both fields, correlating them and, at the same time, affecting their statistical properties. By means of two different criteria we showed that such a correlation is of quantum nature, making possible the application of this system in, for example, quantum information and quantum computation. The theoretical predictions were corroborated by our experimental results regarding the quantum fluctuations and the existence of a correlation between the pump and probe fields. This is the first experiment to investigate statistical properties of the fields in EIT. The intensity correlation measured is the first step towards the observation of entanglement between the fields.

Mankind has come a long way since the invention of wheel to accessing information in the quintillionth of a second. At the heart of every invention ever made, there has been only one objective, to ease the way of living. The progeny of this philosophy automatically came to be known as technology. It was technology that led to the design of the wheel for fast human transportation and the same motivation let him design more sophisticated machines. In mankind’s journey to improve technology, it began to learn efficient or correct ways to utilize and understand resources around it, creating a whole new philosophy called science. Ingeniously, it was science that let humans understand what they were made of: matter, to discovering what matter itself was composed of: atoms and what puts these together: forces. Science and technology has been of tremendous comfort for mankind and has helped it evolve throughout history. However, it is not always that science and technology go hand in hand. Technology has always helped man design devices and instruments which often bring physical comfort. Science on the other hand has made sure that loss in manual labor is compensated by increased inquisitiveness. There were times when technology was more developed than science. This was the time when machines were taking mankind by fire, resulting in the first and second industrial revolutions. During that same time, science was develop-ing slowly by increasing human curiosity to learn the way nature functioned at finer details. This led to the discovery of the electron by Joseph John Thomson, who proved the electron to be a negatively charged particle. Consequently, he was awarded the 1906 Nobel Prize in Physics for his work on electricity conduction in gases. Later, his son, George Paget Thomson, counter-proved that electrons are actually waves. He was also awarded the 1937 Nobel Prize in Physics, along with Clinton Joseph Davisson for their discovery of electron diffraction caused by crystals. Despite the ambiguity, mankind today accepts electrons to have dual properties. It is both a wave and a particle. This duality is not limited to electrons but is applicable to all matter, as proposed by Louis de Broglie and is one of the fundamental principles in science. With the help of well-developed technology, mankind can now design machines that allow controlled flow of electrons establishing the world of electronics, allowing faster human communication. The study of electronic properties and its usage in designing efficient devices is what electronics is all about. Electrons are the protagonist of mankind today. The presence of electrons is unanimously accepted by everyone. All physical and chemical processes are a result of electrons getting transported. Electron transfer processes are ubiquitous in nature, be it in photosynthesis or energy production in mitochondria . It is the fundamental process in all chemical reactions and all physical processes related to electricity. Every piece of hi-tech gadget practically uses the electron, and the whole of humanity is being serviced by it. In fact, a life without utilizing the electrons is abysmally mundane. Electronics has evolved from designing the first millimeter sized point contact transistor to silicon chip processors that contain billions of nanosized transistors. Studying electron transport has also led to the discovery of light emission during conduction popularly known as LED, an abbreviation for light emitting diode. Heating up of devices during electron transport forced mankind to study heat transport and design materials that have highly efficient electron transfer processes. Electron transfer is also the basic principle behind the Scanning Tunneling Microscope (STM), Scanning Electron Microscope (SEM) and the Transmission Electron Microscope (TEM) which replaced the conventional idea of using light (photons) as a source to observe matter at the nanolevel. However, mankind is still in the process of developing a technology which exploits both properties of the electron simultaneously. Today, science and technology work together to overcome this barrier. Indeed, science and technology today have come as far as controlling electron transport up to a single atomic level where quantum effects (discretization and interference of states that make up the system) are very pronounced. This branch can be referred to as quantum electronics or quantronics. It is one of the possible alternatives to conventional silicon based electronics, and is made of three separate fields. The first one that exploits the quantum nature of electron transport in nanoscopic systems, is usually called molecular electronics or moletronics. The second involves ex-ploiting the spin of the electron and is termed as spintronics. The third is the most challenging where neither science nor technology has been able to fully grasp the characteristics, i.e utilizing the heat quanta in designing thermal de-vices at the single atomic level. In general, for ultimate exploitation of both the wave and particle characteristics of the electron, a proper comprehension of the quantum effects during electron transport is necessary to design a quantronic device. Also, in any quantronic device, apart from quantum effects, fluctuations in temperature cause changes in the flow of electrons. Since electron flow is a random process, fluctuations need to be analyzed from a statistical point of view. Moreover, to address issues related to efficiency and power of these quantronic devices, a proper understanding of the thermodynamic aspects is required. The aim of the work in the thesis is to theoretically analyze the fluctuations, quantum effects and thermodynamics, that in principle, affect the basic physics and chemistry during electron and heat transport in a specific class of out of equilibrium quantum systems. This class of quantum systems are prototypes for designing quantronic devices, where both wave and particle nature of the electrons are pronounced. These are called molecular junctions or quantum junctions. It will in turn help the field of quantronics in the long run. However, in this thesis, it is the science that I address and not the technological aspects.

A l’aide d’un interféromètre différentiel à quadrature de phase nous mesurons les fluctuations thermiques de la déflexion d’un micro-levier. Il est alors possible de déduire différentes propriétés mécaniques du levier telles que raideur, fréquences de résonance, facteurs de qualité etc. Dans un tel système, la précision maximale sur les mesures est limitée par le bruit de grenaille des photodiodes (shot-noise). Afin d’augmenter le rapport signal sur bruit, nous augmentons l’intensité lumineuse du laser de mesure, diminuant ainsi le bruit de fond des spectres de fluctuations thermique. En revanche, l’augmentation de l’intensité du laser a pour effet de décaler vers les basses fréquences les résonances du levier. Une première partie de ce travail de thèse a pour objectif la compréhension de ce phénomène. Ainsi, nous associons le décalage en fréquence à un échauffement du levier par le laser de l’interféromètre et au flux de chaleur associé le long du levier. Nous développons alors un modèle permettant de relier cet effet à la température de l’extrémité du levier en se basant sur un profil de température linéaire. Une seconde partie de ce travail vise à mesurer la température effective d’un levier à l’aide d’une extension du théorème fluctuation-dissipation. Nous montrons que les fluctuations de ce système hors équilibre sont plus faibles que celles attendues compte tenu du profil de température. Nous cherchons alors à identifier l’origine de ce déficit de fluctuations. Dans une dernière partie nous estimons les profils de température sur des leviers en faisant varier leurs paramètres géométriques ou leur coefficient d’absorption, ainsi que la position du laser chauffant le levier. / Thanks to a home made quadrature phase differential interferometer, we measure the thermal fluctuations ofa cantilever. It is then possible to infer various mechanical properties such as eigenfrequencies, stiffness,quality factor, etc. In such system, the maximal precision on the measure is limited by the shotnoise of thephotodiodes. To increase the signal-noise ratio we raise the light intensity of the laser, lowering thebackground noise. Doing so, the cantilever eigen frequencies shifts to lower values. A fisrt part of this thesiswork has for objective the understanding of this phenomenon. Thus, we associate this frequency shift with aheating of the cantilever by the laser. We develop a model linking this effect to the temperature at the freeend of the cantilever assuming a linear temperature profile.A second part of this thesis leads us to estimate the effective temperature of a cantilever using thefluctuation-dissipation theorem. We show that the fluctuations of our out of equilibrium system are lower thanthe fluctuations expected at equilibrium.In the last part, we estimate the temperature profiles on cantilevers by varying their geometry, absorptioncoefficient and laser position.

L'étude des fluctuations dans les milieux confinés constitue un domaine de recherche très récent, que ce soit du point de vue théorique ou expérimental. Afin d'analyser le rôle du confinement sur les propriétés des fluctuations de densité dans un mélange binaire, nous avons développé un système de mesure d'une grande sensibilité, où l'intensité des fluctuations et leur longueur de corrélation peuvent être amplifiées. L'idée consiste à travailler proche du point critique d'une transition de phase de démixion d'un mélange binaire. En effet, la longueur de corrélation augmente exponentiellement lorsqu'on s'approche de la température Tc du point critique de démixion.Nous avons développé un montage permettant de confiner le mélange entre un échantillon plan et une sphère colloïdale attachée à l'extrémité d'un levier de Microscope à Force Atomique (AFM). D'après les prédictions de Fisher et De Gennes, un effet intéressant émerge lorsque la longueur de corrélation est comparable avec la taille du confinement: les deux surfaces vont soit s'attirer, soit se repousser suivant les préférences d'adsorption des composants du mélange pour chacune des surfaces. On nomme cet effet l'effet Casimir critique, en référence à la force de Casimir électrodynamique qui résulte du confinement des fluctuations quantiques du champ électromagnétique.Durant cette thèse, nous avons mesuré la force de Casimir électrodynamique avec le système de mesure que nous avons développé, d'abord dans une atmosphère d'azote puis dans l'éthanol. Ces mesures prouvent que notre appareil de mesure est assez sensible pour mesurer des forces très faibles de l'ordre de la dizaine de pN. Les forces mesurées sont comparées à la théorie de Lifshitz, où les effets de conductivité finie des surfaces sont considérées. / The study of density fluctuations inside confined liquid systems has received the attention of recent theoretical and experimental papers. In order to analyze the role of confinement on the statistical properties of fluctuations, we developed a highly sensitive system where the intensity of fluctuations, as well as their spatial correlation length can be simply tuned. The idea will be to enhance the role of fluctuations working close to the critical temperature Tc of a second order phase transition in a binary mixture. Indeed, the correlation length dramatically increases when one approaches the critical demixion point.The confinement is obtained by using a sphere-plane geometry with a colloidal particle attached to the cantilever of an Atomic Force Microscope (AFM). When the correlation length is comparable with the distance of confinement, Fisher and De Gennes predicted the existence of an interesting effect: the two surfaces will be submitted to either an attracting or a repelling force, depending on boundary conditions. This effect is called the critical Casimir force in reference to the quantum Casimir force resulting from the confinement of quantum fluctuations of the electromagnetic field.During this thesis, we measured the quantum Casimir force between the sphere and the plate, first in a nitrogen atmosphere and then in ethanol, showing that the developed instrument is sufficiently sensible to measure very weak force, of the same order of magnitude or even weaker than the critical Casimir force. Measurements are compared to Lifshitz theory, taking into account the finite conductivity of surfaces.

Cette étude, menée principalement par des moyens expérimentaux, analyse la dynamique des fluctuations de concentration produites au sein d’un panache d’un scalaire passif émis par une source ponctuelle dans une couche limite turbulente. En étendant le travail de Fackrell and Robins (1982) sur les fluctuations de concentration, on décrit l’évolution des quatre premiers moments de la concentration et on étudie l’influence des conditions à la source (telles que la taille et la hauteur de la source et la vitesse de sortie) sur les moments mêmes. L’étude est complétée par une description détaillée des statistiques du champ de vitesse dans la couche limite, comprenant des informations sur la structure spatiale et temporelle de la turbulence. Cette base de données expérimentale a été utilisée pour valider deux différentes approches à la modélisation de la dispersion: un modèle analytique de meandering et un modèle Lagrangien stochastique avec un schéma de micro mélange. / This experimental study analyses the dynamics of concentration fluctuations in a passive plume emitted by a point source within the turbulent boundary layer. We aim to extend the popular study of Fackrell and Robins (1982) about concentration fluctuations and fluxes from point sources by including third and fourth moments of concentration. We also further inquire into the influence of source conditions, such as the source size, source elevation and emission velocity, on higher order concentration moments. The data set is completed by a detailed description of the velocity statistics within the TBL, with exhaustive information on both the temporal and spatial structure of the flow. The experimental data-set has been used to test two different modeling ap- proaches: an analytical meandering plume model (in one and in three dimen- sions) and a Lagrangian stochastic micro-mixing model.

Cette thèse porte sur le processus de défaillance des entreprises en Tunisie. L’objectif est d’étudier le sujet d’un point de vue, à la fois, macroéconomique, microéconomique et juridique. Le travail est précédé d’une revue de la littérature axée sur les principaux intervenants dans le processus de faillite : les débiteurs, les créanciers et la législation en matière de faillite.La première partie propose une synthèse des résultats de nombreux travaux de recherche se rapportant, d’une part, aux différentes stratégies fixées par les débiteurs et les créanciers en vue de protéger leurs propres intérêts et d’autre part, à l’efficacité des procédures collectives dans la prévention des éventuelles utilisations opportunistes de la loi. Dans un second temps, la thèse traite le sujet d’un point de vue macroéconomique en cherchant à déterminer l’effet des fluctuations macroéconomiques sur le taux de défaillance en Tunisie sur la période allant de 1997 à 2010. Des variables spécifiques au cas tunisien et exprimant au mieux l’importance des secteurs de l’industrie et du tourisme dans l’économie tunisienne ont été considérées dans le modèle en plus des variables communément utilisées dans la littérature et qui ont prouvé leur rôle relativement significatif dans l’explication des taux de défaillance.La troisième partie de la thèse se concentre sur le niveau d’efficacité des procédures collectives tunisiennes dans la résolution du problème de défaut de paiement. Son efficacité est étudiée de point de vue : i) création de valeur et ce en termes de recouvrement total des créanciers à travers la maximisation de la valeur de l’entreprise défaillante, et ii) recouvrement des créanciers sécurisés. L’intérêt particulier porté sur la classe des créanciers sécurisés (notamment les banques) est justifié par l’importance du secteur bancaire dans le financement des entreprises en Tunisie et par conséquent dans le développement de l’économie tunisienne.La dernière partie de la thèse propose une analyse approfondie de la loi de faillite tunisienne dans le cadre d’une étude comparative avec 18 autres pays européens et non européens.A travers une approche « Law and Finance », dix indices juridiques ont été construits pour « mesurer » dix fonctions de Droit de faillite. Ensuite, des analyses univariée et multivariée ont été menées pour dégager les points de similarité ou de disparité entre les différentes lois de faillite. / This thesis focuses on the Tunisian bankruptcy process. The objective is to treat the subject from a macroeconomic, microeconomic and legal point of view. The work is preceded by a literature review focused on the main actors in the bankruptcy process: debtors, creditors and bankruptcy law. The first part provides a summary of many research results relating on the one hand, to the different strategies set by debtors and creditors to protect their own interests and on the other hand to the effectiveness of the procedures in preventing any opportunistic uses of the law. In the second part, we seek to determine the effect of macroeconomic fluctuations on the failure rate of businesses in Tunisia over the period 1997-2010. The selected variables are those that have been frequently used in the literature and that showed their significant impact onto the rate of corporate failure. Other original variables, more specific to the Tunisian case were considered to account for the importance of industry and tourism sectors in the Tunisian economy. The third part of this thesis focuses on the efficiency of bankruptcy procedures in Tunisia, a country characterized by the importance of its banking sector. We gathered original and unique information on Tunisian firms that went bankrupt between 1995-2009. We find that the Tunisian reorganization procedures are able to generate substantial recoveries, but those are mainly captured by the preferential claims (employees and public claims). This is coherent with the authorities’ willingness to improve social protection, but this raises concerns as the Tunisian firms are mainly financed by bankers. Our analysis shows that the secured creditors are poorly protected under bankruptcy: they rank almost last in the priority order of repayment, and their recovery rate is similar to one of the unsecured creditors. We also find that the rather high level of recovery rate is mainly attributable to the reorganization procedures. We finally find that the court’s choice between reorganization and liquidation is not influenced by the structure of claims. Thus, in Tunisia, the creditors are losing hand once bankruptcy is triggered.To better understand the characteristics of Tunisian bankruptcy procedures, the last part of the thesis offers a comparative study of Tunisian bankruptcy law with 18 other European and non-European countries. Ten legal indexes were constructed through "Law and Finance" approach to "measure" ten functions of bankruptcy law.Univariate and multivariate analyzes were conducted to identify the similarity or disparity points between the various bankruptcy laws.