Title: The comparison of ice skating efficiency developed by drill vs. gaming form in the U - 10 category. Objectives: The aim of this dissertation is to compare the efficiency of skating developed by drill and game forms of training using speed-skill tests for ice hockey players under the age of 10. Methods: This work used the method of quantitative analysis of test results for ice hockey players of the U10 age category. The tested group consisted of 18 players of the U10 age category from the HC Hvězda Praha team. The dissertation includes three stages of data collection. The first set of data is preliminary, the second set of data is collected after the intervention by the drill form of training and the third set of data is collected after the intervention by the game form of training. The development of skating skills in drill and game form of training always took place in the first twenty minutes of the training. The obtained sets of data were recorded and then evaluated in accord with Friedmanan and Wilcoxon tests. Results: In the 6.1 m sprint, the 35 m sprint and the S-Corner test, slalom with a puck test and the crossing with a puck test there was recorded improvement after each intervention. In the crossing without a puck test the difference was recorded only after the drill form of...

Med sitt ofullbordade verk Le Visible et l’invisible påbörjade Maurice Merleau-Ponty formulerandet av en poetisk ontologi – en filosofi som sätter konsten i centrum för erfarenheten av Varat och som därmed går att förstå som en estetik. Uppsatsen undersöker Merleau-Pontys Le Visible et l’invisible som en estetik i den dubbla bemärkelsen av en teori om sinnlighetens relation till tänkandet och vilken betydelse konsten har för denna relation. I fokus är sinnlighetens öppenhet gentemot en värld bortom det enskilda subjektet, som detta subjekt står i kontakt med genom sin kroppslighet. Här undersöks hur konstens sinnliga idéer indirekt frambringar en erfarenhet av Varats osynliga lager, de latenta samband mellan Varats framträdelser som följer och bär upp det synliga, och hur konsten därmed kan sägas frambringa en ny sanning. Här undersöks hur dessa sinnliga idéer kommer till uttryck, vilka former de antar. Med det aktiveras frågan om konstverkets form och innehåll, uttryck och mening. Sinnligheten förstås som samtidig gräns och öppning, som plats för den händelse som skapar världen. / With his unfinished work Le Visible et l’invisible Maurice Merleau-Ponty began to formulate a poetic ontology – a philosophy that places art in center of the experience of Being, and which is therefore possible to understand as an aesthetics. The essay examines Le Visible et l’invisible as an aesthetics in the double sense as a theory of how perception relates to cognition and what impact the arts has to this relation. It focuses on the perception’s openness towards a world beyond the subject, a world that the subject is connected to through its corporeality. It examines how the sensuous ideas of the arts indirectly brings forth the experience of the invisible layers of Being, the latent connections that lines and supports the visible, and how the arts therefore can be said to bring forth a new truth. It examines how these sensuous ideas come into expression, which forms they take. With that the question about form and content, expression and meaning, of the art work is activated. Perception is understood as the simultaneous limit and opening, as the place of the event that creates the world.

I detta examensarbete ville jag undersöka asymmetri och använda det ordet för att formge möbler och objekt. Jag ville undersöka hur asymmetrin skulle kunna te sig och jag lade en stor grund vid litteratur och omvärldsanalys. Med researchen tog jag mig vidare in i en skiss- och modellprocess som därefter ledde fram till två utvalda former som jag skulle tillverka i full skala. Arbetet är förhållet till ett tio veckor långt tidsspann och jag betraktar arbetet i helhet som en skiss och en grund för fortsatta studier på master- och forskarnivå. Jag kom fram till att asymmetri kan te sig på olika sätt i formgivningen – en materiell asymmetri, en asymmetri i formers relationer till varandra och att det krävs en viss symmetri för att kunna urskilja asymmetrin, det avvikande. Resultatet är två möbler som visar hur långt eller hur kort man kan dra asymmetrin och de båda objekten innefattar symmetriska beståndsdelar placerade i en asymmetrisk relation till varandra. / In this thesis I wanted to investigate asymmetry and use that word to design furniture and objects. I wanted to investigate how the asymmetry could manifest itself and I laid a great foundation in literature. With the research I proceeded into a sketch and model process which then led to two selected forms that I would produce in full scale. The work is related to a ten-week long span of time and I regard the work as a whole as a sketch and a basis for further studies at master’s and doctoral level. I found that asymmetry can manifest itself in different ways in design – a material asymmetry, an asymmetry in the relations of shapes to each other and that a certain symmetry is required to be able to discern the asymmetry, the deviating. The result is two pieces of furniture that show how far or how short one can take the word investigated. The two objects comprise symmetrical elements placed in an asymmetric relationship to each other.

Bewehrter Beton ist das heutzutage am meisten verwendete Baumaterial. Es ist universell und preiswert nahezu überall auf der Welt herstellbar. Damit einhergehen allerdings ein hoher CO2-Ausstoß und ein beträchtlicher Verbrauch an natürlichen Ressourcen. Im DFG-Schwerpunktprogramm 1542 wurden deshalb verschiedenste Ansätze erforscht, wie das Material effizienter eingesetzt und damit der Betonbau zukunftsfähig gemacht werden kann. Im vorliegenden Abschlussbericht zum SPP 1542 „Leicht Bauen mit Beton“ (gefördert von 2011 bis 2022) werden die wichtigsten Ergebnisse vorgestellt.:S. Scheerer, M. Curbach: Vorwort | Preface S.13 Teil 1: SPP-Projekte | Part 1: SPP projects A. M. Bauer, M. Breitenberger, K.-U. Bletzinger: Nichtlineare Optimierung geometrisch definierter Fugen von räumlich gekrümmten Betonfertigteilen mit isogeometrischen Verfahren | Non-linear optimization of geometrically defined joints of spatially curved prefabricated concrete elements with isogeometric analysis S.18 L. Ledderose, S. Lehmberg, F. Wirth, H. Kloft, H. Budelmann: Entwicklung neuartiger Verbindungen für komplexe Stab-, Flächen- und Raumtragelemente aus UHPFRC | Development of novel jointing systems for complex beam surface and spatial elements made of UHPFRC S. 50 J. D. van der Woerd, J. Hegger, R. Chudoba: Entwurf und Herstellung von dünnwandigen Faltwerken aus zementbasierten Verbundwerkstoffen | Design and construction of folded plate structures made of novel cementitious composites S. 90 A. Schmidt, M. Curbach: Querschnittsadaption für stabförmige Druckbauteile | Cross sectional adaption for rod-shaped elements in compression S. 118 M. Frenzel, K. Farwig, M. Curbach: Leichte Deckentragwerke aus geschichteten Hochleistungsbetonen | Lightweight ceiling structures made of layered high-performance concrete S. 144 S. Baron, J. Mainka, H. W. Hoffmeister, K. Dröder, H. Kloft: Non-Waste-Wachsschalungen: Neuartige Präzisions-Schalungen aus 100 % recycelbaren Industrie-Wachsen zur Herstellung von geometrisch komplexen Beton-Bauteilen | Non-Waste-Wax-Formwork: Novel precise formwork-technology on basis of 100% recyclable industrial wax for the fabrication of geometrically complex concrete elements S. 170 D. Busse, M. Empelmann: Ultraleichte, dünnwandige stabförmige Betonhohlbauteile | Ultra-light, thin-walled hollow concrete members S. 196 M. Henke, O. Fischer: Formoptimierte filigrane Stäbe aus UHPC und korrosionsfreier CFK-Bewehrung für variable räumliche Stabtragwerke | Shape optimized filigree rods made of UHPC and non-corrosive CFRP reinforcement for variable three-dimensional trusses S. 226 D. Schmeer, M. Wörner, H. Garrecht, O. Sawodny, W. Sobek: Effiziente automatisierte Herstellung multifunktional gradierter Bauteile mit mineralischen Hohlkörpern | Efficient automated production of multifunctional graded components with mineral hollow bodies S. 250 S. Illguth, D. Lowke, T. Kränkel, C. Gehlen: Schalentragwerke mit funktionaler Gradierung | Shell structures with functional grading S. 284 D. Weger, D. Talke, D. Lowke, K. Henke, C. Gehlen, S. Winter: Additive Fertigung frei geformter Betonbauteile durch selektives Binden mit calciumsilikatbasierten Zementen | Additive manufacturing of free formed concrete elements by selective binding with calcium silicate based cements S. 300 C.-A. Graubner, U. Knaack, T. Proske, B. Freund, M. Michel, S. Hickert: Grundlagen zur Entwicklung adaptiver Schalungssysteme für frei geformte Betonbauteile | Fundamental research towards an adaptive formwork system development for freeform concrete building components S. 328 A. Stark, J. Hegger: Sandwichbauteile mit gefalteten und gekrümmten Betondeckschichten | Sandwich panels with folded plate and curved concrete facings S.356 W. Jäger: Untersuchungen zu Trageigenschaften von plattenförmigen Betonleichtbauelementen in Kreuz-Kanal-Technologie | Investigations into the load-bearing properties of slab-shaped lightweight concrete elements in CC technology S.390 M. Schneider, H. Andrä, C. Kohlmeyer, S. Oster: Konstruktion und Optimierung von Klebeverbindungen für Platten- und Scheibenbauteile aus hochfestem Beton | Construction and optimization of adhesive joints for plate and shell construction elements composed of high performance concrete S.412 H. Funke, A. Ehrlich, L. Ulke-Winter, C. Petzoldt, S. Gelbrich, L. Kroll: Flexible GFK-Schalungen zur Herstellung von doppelt gekrümmten Beton-Leichtbauelementen mit stabilisierten Abstandsgewirken | Flexible GFRP-formwork for the production of double curved concrete lightweight elements with stabilized spacer fabrics S.436 H. Funke, L. Ulke-Winter, C. Petzoldt, C. Müller, S. Gelbrich, L. Kroll: Gekrümmte Beton-Leichtbauelemente mit bionisch inspirierten Krafteinleitungssystemen durch Einsatz flexibler GFK-Schalungen | Curved lightweight concrete structures with bionic inspired force transmission elements by the use of flexible GFRP-formworks S.452 L. Lohaus, J. Markowski: Wickelverstärkte Hybridrohre | Wrapping-reinforced hybrid tubes S.472 M. Schlaich, A. Goldack, J. P. Osman-Letelier, D. Lordick, K. Noack, M. Friedrich Eichenauer, R. Päßler, M. Pott: Methoden und Werkzeuge für Entwurf und Herstellung schalenartiger und dünnwandiger Betonbauteile mit Regelflächengeometrie | Methods and tools for the design and construction of thin-walled concrete structures with ruled surface geometry S.488 D. Lordick, D. Klawitter, M. Hagemann: Liniengeometrie für den Leichtbau | Line geometry for lightweight structures S.514 C. Kämper, T. Stallmann, P. Forman, J. Schnell, P. Mark: Leichte verformungsoptimierte Schalentragwerke aus mikrobewehrtem UHPC am Beispiel von Parabolrinnen solarthermischer Kraftwerke | Light-weight shape-optimised shell structures made from high-performance concrete for collector modules of parabolic trough power plants S.536 L. Zhou, J. Simon, S. Reese: Modellreduktion und Substrukturtechnik am Beispiel von modularen Schalentragwerken aus ultrahochfestem Beton | Model order reduction and substructures – application to modular shell structures made of ultra-high performance concrete S.590 M. Schnellenbach-Held, J.-E. Habersaat: Leichte Platten aus Beton mit biaxialem Lastabtrag als bionische Strukturen S.610 O. Gericke, D. Kovaleva, W. Haase, W. Sobek: Abfallfreie Herstellung von Betonbauteilen durch die Verwendung einer gefrorenen Sandschalung | Waste-free production of concrete components by means of a frozen sand formwork S.626 M. Wörner, D. Schmeer, H. Garrecht, O. Sawodny, W. Sobek: Optimalstrukturen aus funktional gradierten Betonbauteilen – Entwurf, Berechnung und automatisierte Herstellung | Optimal structures made of functional graded concrete – design, dimensioning and automated production S.642 Teil 2: Demonstratoren und Anschlussprojekte | Part 2: Demonstrators and follow-up projects D. Busse, L. Ledderose: uni-con² – universal concrete construction S.676 C. Müller, H. Funke, S. Gelbrich, L. Kroll: Carbonbeton-Schalendemonstrator | Shell demonstrator out of carbon reinforced concrete S.682 M. Koschemann, S. Scheerer: CarboLight Bridge – eine ultraleichte Konstruktion aus kohlefaserverstärktem und infraleichtem Beton | CarboLight Bridge – an ultra-lightweight construction made of carbon reinforced and infra-lightweight concrete for the German Museum in Munich S.686 S. Scheerer, B. Beckmann, J. Bielak, S. Bosbach, C. Schmidt, J. Hegger, M. Curbach: Konstruktionsstrategien für materialminimierte Carbonbetonstrukturen – Grundlagen für eine neue Art zu bauen | CRC/Transregio 280: Design strategies for material-minimised carbon reinforced concrete structures – principles of a new approach to construction S.700 D. Talke, D. Weger, K. Henke, T. Kränkel, D. Lowke, C. Gehlen, S. Winter: Industrieller 3D-Betondruck durch selektive Zementaktivierung – Verfahren, Material, Anwendungen | Industrial 3D concrete printing by selective cement activation – process, material, applications S.706 D. Schönfelder, H. Funke, S. Gelbrich, L. Kroll: Automatisierte Herstellungstechnologie zur Fertigung von dünnwandigen 3D-geformten Verbundelementen für nachhaltige energie-effiziente Fassadenlösungen – „GreenFACE“ | Automated manufacturing technology for the production of thin-walled 3D-shaped composite elements for sustainable, energy-efficient facade solutions – “GreenFACE“ S.710 A.-C. von der Heid, N. Will, J. Hegger: Weitspannende Sandwichelemente mit vorgespannten Deckschichten aus Carbonbeton | Wide-span sandwich elements with prestressed facings made of carbon reinforced concrete S.714 L. Ledderose, H. Kloft: Magnetische Ausrichtung von Mikro-Stahldrahtfasern in UHPFRC | Magnetic alignment of microsteel fibers in UHPFRC S.720 C. Petzoldt, C. Müller, H. Funke, S. Gelbrich, L. Kroll: Wiederverwendbare flexible GFK-Schalungen zur Herstellung von doppelt gekrümmten Beton-Leichtbauelementen | Re-usable and flexible GFRP formwork for the production of double curved concrete lightweight elements S.726 L. Lohaus, J. Markowski, R. Rolfes, F. F. Tritschel: UHFB-Drucktragglieder (basierend auf wickelverstärkten Hybridrohren) in voll digital datengestützter Fließfertigung als Basis für eine modulare Betonbauweise | UHPC compression rods (based on wrapped hybrid tubes) in fully digitally data-supported flow production as the basis for a modular concrete construction method S.734 P. Forman, T. Stallmann, P. Mark, J. Schnell: Auslegung von Parabolrinnen für Solarkraftwerke im Originalmaßstab S.738 P. Forman, S. Penkert, P. Mark, J. Schnell: Punktfokussierende Heliostaten aus Hochleistungsbeton | Point-focusing heliostats made from high-performance concretes S. 754 D. Kovaleva, O. Gericke, W. Sobek: Herstellung von biomimetischen und biologisch inspirierten (modularen) Strukturen | Fabrication of biomimetic and biologically inspired (modular) structures S.758 O. Gericke, W. Haase, W. Sobek: Sandschalung zur Herstellung von dünnwandigen Sandwiches aus Carbonbeton | Sand formwork for the production of thin-walled sandwiches made from carbon concrete S.762 D. Nigl, D. Schmeer, W. Haase, B. Schönemann, K. Lenz, S. Steier, O. Sawodny, P. Leistner, L. Blandini, W. Sobek: Integrale Planung und Herstellung von ressourceneffizienten Betonbauteilen aus mineralischer Faserverbundbewehrung und gradiertem Beton | Design and production of resource-efficient concrete components made of mineral fibre composite reinforcement and graded concrete S.766 Teil 3: Koordination | Part 3: Coordination S. Scheerer, M. Curbach: Koordination des SPP 1542 | Coordination of SPP 1542 S.774 / Reinforced concrete is the most widely used building material today. It can be produced universally and cheaply almost anywhere in the world. However, this is accompanied by high CO2 emissions and considerable consumption of natural resources. In the DFG Priority Programme 1542, a wide variety of approaches were therefore investigated to find out how the material can be used more efficiently and thus how concrete construction can be made fit for the future. This final report on SPP 1542 “Concrete Light“ (funded from 2011 to 2022) presents the most important results.:S. Scheerer, M. Curbach: Vorwort | Preface S.13 Teil 1: SPP-Projekte | Part 1: SPP projects A. M. Bauer, M. Breitenberger, K.-U. Bletzinger: Nichtlineare Optimierung geometrisch definierter Fugen von räumlich gekrümmten Betonfertigteilen mit isogeometrischen Verfahren | Non-linear optimization of geometrically defined joints of spatially curved prefabricated concrete elements with isogeometric analysis S.18 L. Ledderose, S. Lehmberg, F. Wirth, H. Kloft, H. Budelmann: Entwicklung neuartiger Verbindungen für komplexe Stab-, Flächen- und Raumtragelemente aus UHPFRC | Development of novel jointing systems for complex beam surface and spatial elements made of UHPFRC S. 50 J. D. van der Woerd, J. Hegger, R. Chudoba: Entwurf und Herstellung von dünnwandigen Faltwerken aus zementbasierten Verbundwerkstoffen | Design and construction of folded plate structures made of novel cementitious composites S. 90 A. Schmidt, M. Curbach: Querschnittsadaption für stabförmige Druckbauteile | Cross sectional adaption for rod-shaped elements in compression S. 118 M. Frenzel, K. Farwig, M. Curbach: Leichte Deckentragwerke aus geschichteten Hochleistungsbetonen | Lightweight ceiling structures made of layered high-performance concrete S. 144 S. Baron, J. Mainka, H. W. Hoffmeister, K. Dröder, H. Kloft: Non-Waste-Wachsschalungen: Neuartige Präzisions-Schalungen aus 100 % recycelbaren Industrie-Wachsen zur Herstellung von geometrisch komplexen Beton-Bauteilen | Non-Waste-Wax-Formwork: Novel precise formwork-technology on basis of 100% recyclable industrial wax for the fabrication of geometrically complex concrete elements S. 170 D. Busse, M. Empelmann: Ultraleichte, dünnwandige stabförmige Betonhohlbauteile | Ultra-light, thin-walled hollow concrete members S. 196 M. Henke, O. Fischer: Formoptimierte filigrane Stäbe aus UHPC und korrosionsfreier CFK-Bewehrung für variable räumliche Stabtragwerke | Shape optimized filigree rods made of UHPC and non-corrosive CFRP reinforcement for variable three-dimensional trusses S. 226 D. Schmeer, M. Wörner, H. Garrecht, O. Sawodny, W. Sobek: Effiziente automatisierte Herstellung multifunktional gradierter Bauteile mit mineralischen Hohlkörpern | Efficient automated production of multifunctional graded components with mineral hollow bodies S. 250 S. Illguth, D. Lowke, T. Kränkel, C. Gehlen: Schalentragwerke mit funktionaler Gradierung | Shell structures with functional grading S. 284 D. Weger, D. Talke, D. Lowke, K. Henke, C. Gehlen, S. Winter: Additive Fertigung frei geformter Betonbauteile durch selektives Binden mit calciumsilikatbasierten Zementen | Additive manufacturing of free formed concrete elements by selective binding with calcium silicate based cements S. 300 C.-A. Graubner, U. Knaack, T. Proske, B. Freund, M. Michel, S. Hickert: Grundlagen zur Entwicklung adaptiver Schalungssysteme für frei geformte Betonbauteile | Fundamental research towards an adaptive formwork system development for freeform concrete building components S. 328 A. Stark, J. Hegger: Sandwichbauteile mit gefalteten und gekrümmten Betondeckschichten | Sandwich panels with folded plate and curved concrete facings S.356 W. Jäger: Untersuchungen zu Trageigenschaften von plattenförmigen Betonleichtbauelementen in Kreuz-Kanal-Technologie | Investigations into the load-bearing properties of slab-shaped lightweight concrete elements in CC technology S.390 M. Schneider, H. Andrä, C. Kohlmeyer, S. Oster: Konstruktion und Optimierung von Klebeverbindungen für Platten- und Scheibenbauteile aus hochfestem Beton | Construction and optimization of adhesive joints for plate and shell construction elements composed of high performance concrete S.412 H. Funke, A. Ehrlich, L. Ulke-Winter, C. Petzoldt, S. Gelbrich, L. Kroll: Flexible GFK-Schalungen zur Herstellung von doppelt gekrümmten Beton-Leichtbauelementen mit stabilisierten Abstandsgewirken | Flexible GFRP-formwork for the production of double curved concrete lightweight elements with stabilized spacer fabrics S.436 H. Funke, L. Ulke-Winter, C. Petzoldt, C. Müller, S. Gelbrich, L. Kroll: Gekrümmte Beton-Leichtbauelemente mit bionisch inspirierten Krafteinleitungssystemen durch Einsatz flexibler GFK-Schalungen | Curved lightweight concrete structures with bionic inspired force transmission elements by the use of flexible GFRP-formworks S.452 L. Lohaus, J. Markowski: Wickelverstärkte Hybridrohre | Wrapping-reinforced hybrid tubes S.472 M. Schlaich, A. Goldack, J. P. Osman-Letelier, D. Lordick, K. Noack, M. Friedrich Eichenauer, R. Päßler, M. Pott: Methoden und Werkzeuge für Entwurf und Herstellung schalenartiger und dünnwandiger Betonbauteile mit Regelflächengeometrie | Methods and tools for the design and construction of thin-walled concrete structures with ruled surface geometry S.488 D. Lordick, D. Klawitter, M. Hagemann: Liniengeometrie für den Leichtbau | Line geometry for lightweight structures S.514 C. Kämper, T. Stallmann, P. Forman, J. Schnell, P. Mark: Leichte verformungsoptimierte Schalentragwerke aus mikrobewehrtem UHPC am Beispiel von Parabolrinnen solarthermischer Kraftwerke | Light-weight shape-optimised shell structures made from high-performance concrete for collector modules of parabolic trough power plants S.536 L. Zhou, J. Simon, S. Reese: Modellreduktion und Substrukturtechnik am Beispiel von modularen Schalentragwerken aus ultrahochfestem Beton | Model order reduction and substructures – application to modular shell structures made of ultra-high performance concrete S.590 M. Schnellenbach-Held, J.-E. Habersaat: Leichte Platten aus Beton mit biaxialem Lastabtrag als bionische Strukturen S.610 O. Gericke, D. Kovaleva, W. Haase, W. Sobek: Abfallfreie Herstellung von Betonbauteilen durch die Verwendung einer gefrorenen Sandschalung | Waste-free production of concrete components by means of a frozen sand formwork S.626 M. Wörner, D. Schmeer, H. Garrecht, O. Sawodny, W. Sobek: Optimalstrukturen aus funktional gradierten Betonbauteilen – Entwurf, Berechnung und automatisierte Herstellung | Optimal structures made of functional graded concrete – design, dimensioning and automated production S.642 Teil 2: Demonstratoren und Anschlussprojekte | Part 2: Demonstrators and follow-up projects D. Busse, L. Ledderose: uni-con² – universal concrete construction S.676 C. Müller, H. Funke, S. Gelbrich, L. Kroll: Carbonbeton-Schalendemonstrator | Shell demonstrator out of carbon reinforced concrete S.682 M. Koschemann, S. Scheerer: CarboLight Bridge – eine ultraleichte Konstruktion aus kohlefaserverstärktem und infraleichtem Beton | CarboLight Bridge – an ultra-lightweight construction made of carbon reinforced and infra-lightweight concrete for the German Museum in Munich S.686 S. Scheerer, B. Beckmann, J. Bielak, S. Bosbach, C. Schmidt, J. Hegger, M. Curbach: Konstruktionsstrategien für materialminimierte Carbonbetonstrukturen – Grundlagen für eine neue Art zu bauen | CRC/Transregio 280: Design strategies for material-minimised carbon reinforced concrete structures – principles of a new approach to construction S.700 D. Talke, D. Weger, K. Henke, T. Kränkel, D. Lowke, C. Gehlen, S. Winter: Industrieller 3D-Betondruck durch selektive Zementaktivierung – Verfahren, Material, Anwendungen | Industrial 3D concrete printing by selective cement activation – process, material, applications S.706 D. Schönfelder, H. Funke, S. Gelbrich, L. Kroll: Automatisierte Herstellungstechnologie zur Fertigung von dünnwandigen 3D-geformten Verbundelementen für nachhaltige energie-effiziente Fassadenlösungen – „GreenFACE“ | Automated manufacturing technology for the production of thin-walled 3D-shaped composite elements for sustainable, energy-efficient facade solutions – “GreenFACE“ S.710 A.-C. von der Heid, N. Will, J. Hegger: Weitspannende Sandwichelemente mit vorgespannten Deckschichten aus Carbonbeton | Wide-span sandwich elements with prestressed facings made of carbon reinforced concrete S.714 L. Ledderose, H. Kloft: Magnetische Ausrichtung von Mikro-Stahldrahtfasern in UHPFRC | Magnetic alignment of microsteel fibers in UHPFRC S.720 C. Petzoldt, C. Müller, H. Funke, S. Gelbrich, L. Kroll: Wiederverwendbare flexible GFK-Schalungen zur Herstellung von doppelt gekrümmten Beton-Leichtbauelementen | Re-usable and flexible GFRP formwork for the production of double curved concrete lightweight elements S.726 L. Lohaus, J. Markowski, R. Rolfes, F. F. Tritschel: UHFB-Drucktragglieder (basierend auf wickelverstärkten Hybridrohren) in voll digital datengestützter Fließfertigung als Basis für eine modulare Betonbauweise | UHPC compression rods (based on wrapped hybrid tubes) in fully digitally data-supported flow production as the basis for a modular concrete construction method S.734 P. Forman, T. Stallmann, P. Mark, J. Schnell: Auslegung von Parabolrinnen für Solarkraftwerke im Originalmaßstab S.738 P. Forman, S. Penkert, P. Mark, J. Schnell: Punktfokussierende Heliostaten aus Hochleistungsbeton | Point-focusing heliostats made from high-performance concretes S. 754 D. Kovaleva, O. Gericke, W. Sobek: Herstellung von biomimetischen und biologisch inspirierten (modularen) Strukturen | Fabrication of biomimetic and biologically inspired (modular) structures S.758 O. Gericke, W. Haase, W. Sobek: Sandschalung zur Herstellung von dünnwandigen Sandwiches aus Carbonbeton | Sand formwork for the production of thin-walled sandwiches made from carbon concrete S.762 D. Nigl, D. Schmeer, W. Haase, B. Schönemann, K. Lenz, S. Steier, O. Sawodny, P. Leistner, L. Blandini, W. Sobek: Integrale Planung und Herstellung von ressourceneffizienten Betonbauteilen aus mineralischer Faserverbundbewehrung und gradiertem Beton | Design and production of resource-efficient concrete components made of mineral fibre composite reinforcement and graded concrete S.766 Teil 3: Koordination | Part 3: Coordination S. Scheerer, M. Curbach: Koordination des SPP 1542 | Coordination of SPP 1542 S.774

This study describes a set of salient formal norms for the eighteenth-century Spanish keyboard sonata through an application of Hepokoski and Darcy's sonata theory, William Caplin's form-functional theory, and Robert Gjerdingen's schema theory. It finds that particular thematic types, intra-thematic functions, and rhetorical markers characterize this repertoire. In order to trace the development of these norms throughout the eighteenth century, this work is organized into two parts. The first part (Chapters 2 and 3) examines the mid-century Spanish keyboard sonatas of Sebastián de Albero (1722–1756), Joaquín Ojinaga (1719–1789), and their contemporaries. The second part (Chapters 4 and 5) examines the late-century Spanish keyboard sonatas of Manuel Blasco de Nebra (1750–1783) and his contemporaries.

Idrottsämnet i skolverksamheten innehåller mängder av olika aktiviteter. Bakgrunden till denna studie grundar sig i tidigare forskning som bekräftar att dansundervisningen kommer i skymundan för mer populära aktiviteter och bollspel. På grund av dansens påvisade svaga genomslag i undervisningen samt att en ny läroplan har implementerats i skolan, finns vetenskapliga tomrum kopplat till dansundervisningen över tid. Syftet med denna studie är att fokusera på dansen och uppmärksamma tre olika dansformer såsom de träder fram i samtliga kursplaner mellan 1962-2022. Denna studies tillämpade metod är en kvalitativ innehållsanalys av dokument, vilket har möjliggjort granskningen av LGR62, LGR69, LGR80, LPO94, LGR11 och LGR22. Textinnehållet i samtliga kursplaner är i sin tur avgränsat till idrottsämnets centrala innehåll och betygskriterier. Resultatet visar att dansen har haft ett varierat genomslag i kursplanerna och att framställningen av dansformerna har förändras över tid. Vidare jämförs likheter och skillnader i hur dansformerna träder fram, för att då kunna synliggöra mönster. Den kulturella formen tenderar att avta med tiden medan den expressiva formen synliggörs mest och finns med i alla kursplaner. Träningsformen träder i sin tur fram minst, men kan tänkas få ett ökat utrymme i framtiden. I diskussionen redogörs en sammanfattande tolkning av denna studies resultat. Genom att utgå från studiens syfte och frågeställningar ställs dessa i relation till tidigare forskning. Med hjälp av läroplansteorin motiveras tolkningar och ställningstaganden där förklaringsmodeller i första hand kopplas mot bland annat samhället och dansens genomslag i undervisningen. / Physical education in school contains many different activities. The background for this study is based on previous science and research, which confirms that dance lessons are reduced by more popular activities and ball games. Since the dance demonstrated as a weak impact in school, there are scientific gaps connected to dance lessons over time. The purpose of this study is to focus on dance and then pay attention to three different forms of dances, as they appear in all curricula between 1962-2022. This study´s method is a qualitative content analysis of documents, which made it possible to review the content in LGR62, LGR69, LGR80, LPO94, LGR11 and LGR22. The content in all curricula is in turn limited to physical educations syllabuses and specific the core content and grading criteria. The results of this study confirm that dance has had a varied impact in the syllabuses and the forms of dance represents changes over time. Furthermore, did a comparison show similarities and differences of how the forms of dances appear over time, which made patterns noticeable. The culture dance tends to decline over time, while the expressive dance is most visible and the only one that is included in all syllabuses. The training dance, fore’s the least, but could conceivably get an increased space in the future. The discussion presents a summarized interpretation of the results of this study. Based on the study's propose and questions, these are placed in relation to previous research. With the help of curriculum theory, interpretations and positions are justified where explanatory models are primarily linked to society and the impact of dance in physical education.

Detta examensarbete handlar om konceptframtagning av ett tilläggssystem för QFM-pressen som är tillverkad av Quintus Technologies. I dagsläget kan pressen endast utföra kallformspressning och efter ett avslutat projekt är målet att kunna kombinera både kall- och varmformspressning med hjälp av tilläggssystemet. Olika konceptidéer genererades med hjälp av brainstorming och sedan valdes det mest lämpliga konceptet utifrån en beslutsmatris. Genom ett iterativt arbete med det valda konceptet kunde ett resultat presenteras med 3D-modellering i PTC Creo Parametric. Efter ett avslutat projekt uppfylldes syftet och målet med detta examensarbete. / The purpose of this thesis project is to create a concept for an additional system that may be used by the QFM-press. Currently, the press can only execute cold-form pressing rather than a combination of both cold- and hot-form pressing. Different conceptual ideas were generated using brainstorming method, and the most suitable concept was chosen based on a decision matrix. After investigating possible solutions, results associated with the 3D-modelling in PTC Creo Parametric were present. By the end of this study, the purpose and goals of this thesis were fulfilled.

My purpose with this thesis is to examine Adorno’s rethinking of the aesthetic concept of form, in his last work, Ästhetische Theorie. Artistic form has in the tradition of aesthetics been quite forgotten according to Adorno. He even calls it, “the blind spot of aesthetics”. To rework the concept of form he introduces a set of conceptual relationships that takes an indispensable part in the new multifaceted concept of form. In fact, there is a plurality of concepts that is being put to work, to arrive at a new understanding of form. My methodological approach has been to trace these conceptual relationships that revolve around the aesthetic form and to highlight their connections. My contribution with this undertaking is to accentuate the weightiness of the form concept in Ästhetische Theorie. In the concept, Adorno’s materialistic thinking also becomes discernible. This aspect is especially mirrored in the theoretical attention he pays to the aesthetic material and the artifact itself. Another purpose of this thesis is to explore how the aesthetic form can be critical and to fathom what it implies. Criticism in Ästhetische Theorie is closely related to what Adorno calls aesthetic truth, which is taking shape in the artistic form. The form is thus related to many of the essential concepts in Ästhetische Theorie, such as truth and illusion. The study further examines how the critical form can be autonomous, while at the same time being deeply enmeshed in society.

Der Text unternimmt den Versuch, einige Begriffe und Denkfiguren von Gilles Deleuze auf die Sonaten Domenico Scarlattis anzuwenden. So wird 'Deterritorialisierung' auf Scarlattis Umgang mit Tonarten bezogen, 'Ereignis' in Zusammenhang mit 'Oberfläche' auf Motivik und Form. Letztlich lassen sich Scarlattis Sonaten als Aphorismen beschreiben, in denen die Grenzen der üblichen Logik überschritten werden und sogar ein Recht auf Sinnwidrigkeit beansprucht wird. / This article attempts to apply some of Gilles Deleuze’s concepts and ways of thinking to the sonatas of Domenico Scarlatti. Thus “deterritorializing” (Deterritorialisierung) will be applied to Scarlatti’s approach to keys, and “event” (Ereignis) and “surface” (Oberfläche) will be applied to motive and form. Finally, Scarlatti’s sonatas may be described as aphorisms in which the boundaries of standard logic are exceeded and even the right to absurdity is claimed.

To learn more about the structure of hadrons we study form factors. In the semi-leptonic decay Ω- → Ξ0W- two types of form factors arise namely the vector and axial-vector transition form factors. We focus on the vector transition form factors at next-to-next-to-leading order in the power counting of chiral perturbation theory and study their quark mass dependence. They are related to the scattering amplitude for the transition and therefore we have to calculate Feynman diagrams. Next-to-next-to-leading order Feynman diagrams translate to 1-loop diagrams and at this order there is a substantial amount of them. This study is a feasibility study and therefore we limit this study to diagrams containing the low-energy constants HA and hA from the leading order chiral Lagrangian. There are 5 such diagrams, three with two propagators in the loop (bubble diagrams) and two with three propagators in the loop (triangle diagrams). We derive explicit expressions for all 5 diagrams. To calculate these diagrams numerically we use Mathematica and FeynCalc. We provide numerical results for the three bubble diagrams but not the triangle diagrams due to the long computing time for these diagrams. Therefore, we show that performing form factor calculations at NNLO seems feasible but there needs to be more investment into figuring out the coding aspects regarding the triangle diagrams.