The diploma thesis presents design of construction with FRP reinforcement. Including design process of cross-section with FRP reinforcement exposed to bending moment and shear force at ultimate limite state according to given standards and guidelines. Long term physical and mechanical properties of FRPs are taking into account. There are also compared load capacities of cross-section exposed to combination of bending moment and axial force, which were designed according to mentioned standards. In another part of diploma thesis there is a design of construction (precast gatehouse) with FRP reinforcement and steel reinforcement with ordinary and lightweight concerete.

This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.