This master´s thesis deals with the design of a cartridge spindle for milling machines. The aim of the work is to design a spindle with a power of 15 kW, which allows the automatic exchange of tools with ISO interface. In the beginning, the thesis deals with the description of the individual components related to the construction of machine tools spindle. A spindle design concept is chosen, for which a number of calculations were made concerning the structure itself. Based on the proposed design, a 3D model and drawing documentation were made.

The master´s thesis deals with the design of the headstock for the horizontal boring center and design of the milling head. In the first part of the thesis, a search is made in the field of boring machines, main parts of boring machine headstock and milling heads. Based on this theoretical analysis, the input parameters for the calculation of the tension, power and torque characteristics of the headstock are selected. Subsequently, the design of the headstock and milling head is done using a 3D model.

The thesis contains of draft, calculations, CAD model and drawing documentation of the moltifunctional machining center with horizontal axis of spindle. This thesis is one of the four parts with which connection ensue the machine-tool. In the first part of my work, there is a constructional draft of the headstock which will enable milling, turning and drilling. In the introduction of this part is headstock research which is solving the most important parts of the headstock of machine . Consequently, technical calculations are acoomplished. Based on these calculations, a specific constructional draft of the headstock is crafted. In the next part of my work, I do research in the area of removable paring milling heads. After this part, there are technical calculations and the specific constructional draft. In the entire work, there is emphasis put on simplicity and functionality.

This master´s thesis deals with the design of the headstock of a turning center. The aim of the work is the design solution of turning headstock with output of about 5 kW with the possibility of positioning in the C axis. The introductory part of this thesis is focused on the descripti-on of the basic parameters of the headstock and turning centers on the market. The next part deals with choice of cutting conditions and calculation of spindle parameters. These calculations are verified using the FEM method. Based on the calculations and design requirements, a headstock model with drawing documentation is created.

The diploma thesis deals with the design of a built-in headstock of a turning center. The aim of the work is the design of a spindle for machines up to 10 kW. The spindle is driven by a two-speed gearbox and a belt drive. In the introduction, the work deals with the description of individual parts of the turning headstock. A design proposal is performed, accompanied by a number of technical calculations. The result of the work is a 3D model, drawing documentation and calculation report.

Imposition of my diploma thesis is replace current fluid motor that the derive benefit from to indexing turret head behind electrically driven motor in the sliding headstock machine with indication KMX 326 C. Suggested system must be the most toughest and have to correspond with all the dated up parameters for cutting. Integral part of structural design is also becomingly select accurate blocking a turret head. Fluid motor substitutes behind electrical drive from next reasons: - high transmission loss on energy - sensitivity to cleanness liquid - characteristics mechanism depend upon features liquid ( thermal expansivity, fadeaway)

This master thesis deals with the engineering design of a headstock floor type boring/milling machine. At first, background research of boring machines and accessories is performed. The type and parameters of the floor type boring machine are chosen according to the background research. In the next part the thesis deals with the individual structural units of the headstock. The thesis also contains a 3D model of the headstock and fine drawing documentation. The 3D model of the horizontal floor type boring machine has been converted into a virtual reality environment.

This master’s thesis deals with design of a headstock for a machine tool. Theoretic part of this thesis provides basic description of a horizontal machine tool. Further it is dedicated to description of a headstock of machines with extensionable work spindle. In a design part firstly optimal variant is chosen by using multicriterial analysis. Necessary calculations were done and chosen variant was developed. Design is realised by 3D CAD model and drawing documentantion.

The thesis deals with headstock and spindle of the universal turning center. In the introduction part is a destription of the headstock morfology. It describe how the spindle and headstock can be solved in terms of its bearing, installation, used clamping interface, lubrrication, cooling and sealing. The second part is devoted to the universals turning machines which are available on the market. In the final part is the practical solution of the headstock and spindle on which can be performed for milling and drilling operation instead of turning.

The thesis deals with the design of a headstock for a small lathe. The first part of the thesis deals with the description of individual structural nodes related to the construction of machine tools headstock. The second part includes an overview of similar machines available on the market. The final part deals with the calculation of necessary parameters, the verification of results using the finite element method and the construction of the proposed headstock. Based on the designed construction is created 3D model and drawing documentation.