The project deals with a new building of a Sports centre in Břeclav. The object has two overground floors and one underground floor. The object is projected from the HRLUZ system. The roof is flat.

The aim was to design a multifunctional building, which is located on undeveloped land, plot number 436/3, acreage 5700 m2. The plot is situated in Lipí, cadastral territory Náchod. The building is designed as a multifunctional house, designed for permanent living and administrative activies with built-in basement used for parking cars. The location of the building is given by a situation drawing. The shape of the building is rectangular, free-standing building with all-over basement, measuring 25.9 x 19 m. The house has overal six storeys.

The diploma thesis focuses on design of a nursing home in Planá nad Lužnicí. The building is freely standing on a flat land, with three above-ground floors. The entrance to the building is solved from the northeast side of the local road, the main entrance is oriented on the northwest side. The vertical support structures are made of Heluz brick blocks and covered with a mineral wool thermal insulation system. Horizontal structures are designed as reinforced concrete slabs. The building is roofed with a single-layer flat roof.

The main aim of this thesis is a fabrication drawings on the corner multifunctional building in Camp by urban, architectural and structural engineering solutions.

The Master’s thesis deals a project documentation of a new multifunctional building. The building is a detached. It is the three-storeyed build with attic and cellared. There are 12 flats, 2 surgeries and 6 garages. The surgeries are in the ground floor. The building is built from a Heluz system and walls are isolated by a contact thermal insulation system ETICS. Roof is a cross roof.

In this master´s thesis I propose a new built multifunctional building. It will be located in Znojmo on plot No. 2092/18. The building is designed according to the Heluz system and has four main storeys and flat roof. The first floor will be rented to businesses – a hair salon, a cafe, a nail salon, the other three floors will be used for housing - on each floor there will be two flats 4+1 and one flat 4+kk. The design includes designated parking for residents and customers near builting.

The thesis project is a two-storey motorshow in Ostrava Poruba. It is a detached building with a second floor just above the ground brick part of the ground floor . The building is designed for sales and service of car . In front of the first floor is a shop with WC intended for the customers. Behind this section is on the first floor the facilities for employees , WC , kitchen, two showers and changing rooms . There is also a quick intake for 2 cars. On the second floor are located the office with separate WC . For this part of the building is the last part of a car dealership and service. Here you will find desktop with three separate workning places , part intended for minor repairs , drive trough car wash , paint shop , utility room and a spare parts warehouse . The structural system of the building consists of a steel construction with reinforcing brick core . The cladding of first floor consists from infill brickwork Heluz 20 with contact insulation system . The cladding of second floor from bearing brickwork Heluz P15 30 with a contact insulation system . The construction of the roof deck consists of single-layer straight roof . The supporting structure is made of concrete slab concreting trapezoidal sheet metal deposited on steel lattice girders. The roof deck is insulated with polystyrene EPS 150S . The waterproofing layer is made of two layers of modified bitumen sheet with reinforcements.

The main topic of this diploma thesis was to design project documentation of sporty and relaxation house in the city of Vracov The designed object is located in western part of the town Vracov. The surrouding terrain is flat. I tis designed as three interconnected parts with rectangular shape and flat roof with a slope of 3 %. The subject of this thesis is to design project documentation recreation and relaxation center with guest house in Vracov. Material of the building is a ceramic brick system in a combination with reinforced concrete. Outer walls are made of heat-insulating ceramic brics Heluz Family 2v1 with polystyrene foam inside their cavities. The entrance is situated in the middle part, where reception is located that is directing the clients further into the latter parts of the building. The middle and western parts have two storeys and are made for the sporting activities. The eastern part is a two storey building, where the first floor is designed as a part for relaxation. Second and third floor are designed as a hotel part. Apart form a project documentation, there is an architectonical study of the building and an airconditiong design specialization.

My thesis project is the newly built medical center. It is a detached building, which is situated on a slightly sloping terrain, which will be compensated. The building has a partial basement and two floors. In the basement there is technical support. On the first floor there is a reception, waiting room, nurses, clinic and pharmacy. On the second floor there are again waiting room, nurses, clinic and exercise room. The property is adjacent park. The building is brick ceramic blocks HELUZ is based on the footings. It has a ceiling of prestressed panels and flat roofs, one of which is designed as vegetation. The building is insulated contact system.

The diploma thesis is focused on project documentation of Meat packing plant. Along with meat processing the documentation solve question of accomodation for employees. Building consists of two main sections: The processing – it is structured under requierements of meat packing industry. Second one is residential part set in 2nd, 3rd and 4th floor. Main inspiration for design are meat packing plants in Scandinavian countries, where is often need to provide accomodation to employess because of disadvantageous geographic locality. Building is built of Heluz building system, perimeter walls consists of insulation filled blocks. Building is without basement and it is based on footings of plaint. The roof is flat, partially designed as extensive green roof. Isover system is used to thermal insulation. A part of object is also asphalted plain for transport goods to and from the meat packing plant.