1 |
[en] HOT DOGS ON WOOD-BURNING STOVES: INNOVATIONS AFTECTING LIFESTYLES AND TASTES IN RIO DE JANEIRO / [pt] HOT-DOG NO FOGÃO A LENHA: INOVAÇÕES TRANSFORMANDO O GOSTO CARIOCALUCIANA MONTENEGRO DA SILVA PEREIRA 04 July 2002 (has links)
[pt] Esta dissertação analisa algumas transformações
morfológicas em equipamentos de cozinha, referentes à
conservação e preparo de alimentos, nas moradias da classe
média carioca, entre as décadas de 30 e 60. Para realizar
esta análise, a autora considera o contexto social,
econômico, político e cultural e verifica suas influências
na transformação da forma. Através de uma perspectiva
histórica, pontua os fatos mais relevantes na formação
do corpo social brasileiro da época,destacando a sociedade
urbana do Rio de Janeiro, assim como as transformações
sofridas por essa sociedade. Focaliza as dimensões
culturais, dando maior destaque à cultura material. Observa
as influências internacionais e as conseqüências dessas
influências na configuração dos equipamentos fabricados no
Brasil. Através de anúncios publicitários da época,
fotografias, manuais de utilização e da descrição realizada
por alguns teóricos, a autora verifica e interpreta
as transformações, e as relaciona com o contexto em que se
realizaram. / [en] This dissertation analyses some
morphologicaltransformations in kitchen equipment which was
used for conserving and preparing food in middle class
homes in Rio de Ja-neiro between the decades of the 1930 s
and 60 s. To do this analysis, the author considered the
social, economic, political and cultural con-texts and
verified these influences on the types of transformations
ob-served. From a historical perspec-tive, the most
relevant factors con-tributing to the makeup of Brazilian
society at the time are pointed out, with emphasis on urban
society in Rio de Janeiro and the changes this group
underwent. The focus is on cultural factors, mostly
emphasizing the culture of material items. Inter-national
influences and their conse-quences on the characteristics
of equipment produced in Brazil are observed. By way of
advertisement from the time, photographs, user manuals and
the descriptions made by some theoriticians, the author
verifies and interprets the transfor-mations and their
relationship to the context in which they were made.
|
2 |
Alone but not lonely : Developing a dish dryer for single householdsHuang, Eileen January 2017 (has links)
Sweden has the highest number of single households in the world, yet the majority of household appliances are targeted towards other groups. In a society where single households and compact living are becoming increasingly present, the need for targeted products has become more relevant. The purpose of this project was to design a product which addresses these problems, and eases the everyday life of the intended users. The project was executed using several design methods, such as analytical, observational and practical ones, including interviews with a focus group consisting of 15 people. The use of these design methods identified that the biggest sources of concern amongst the target group were those related to the drying of dishes washed by hand, which led to the development of a dish rack with built in dryers. The design of this product was based on the testing of potential technical solutions and feedback from the focus group, resulting in a kitchen appliance that is uniquely adapted to the needs of single households with limited kitchen space. This design was then presented through sketches, virtual 3D models, and a physical prototype.
|
3 |
Omnicanalidad en los establecimientos de venta de electrodomésticos dirigidos a un público de ingresos medios respecto a la acción de recompra de los consumidores en Lima Metropolitana / Omnichannel in the sale of household appliances aimed at a middle-income public regarding the repurchase action of consumers in Metropolitan LimaDiaz Yataco, Aarón Manuel 09 July 2020 (has links)
El propósito de este trabajo de investigación es poder analizar las diferencias entre unicanalidad, multicanalidad y omnicanalidad, describir las ventajas del marketing omnicanal y, principalmente, probar la relación positiva entre las acciones de omnicanalidad y recompra en los establecimientos de venta de electrodomésticos en Lima Metropolitana en base a tres variables principales: puntos de contacto, gestión de clientes y la interconexión de los puntos de contacto. Los hallazgos del trabajo se basan en estudios cualitativos y cuantitativos realizados teniendo como base una revisión sistemática de papers anexados en los principales repositorios académicos. Si bien no se logran aceptar las hipótesis, sí se encontró una tendencia importante: la intención de recompra empieza a ser positiva a partir del impacto de tres puntos de contacto en adelante. Este trabajo de investigación también brinda recomendaciones dirigidas a la gerencia de los establecimientos de venta de electrodomésticos, a fin de que puedan aplicar, dentro de sus posibilidades, mejoras en su entendimiento de sus consumidores acerca de la omnicanalidad. Finalmente, este estudio hace una serie de contribuciones a la literatura sobre el marketing omnicanalidad. Establece el punto de partida para futuras investigaciones relacionadas a este nuevo fenómeno dentro del marketing. / The purpose of this research document is to be able to analyze the differences between single-channel, multi-channel and omni-channel, describe the advantages of omni-channel marketing and, mainly, to test the positive relationship between omni-channel and repurchase actions in household appliances sales establishments in Metropolitan Lima. based on three main variables: touchpoints, customer management and the interconnection of touchpoints. The findings of the work are based on qualitative and quantitative studies carried out based on a systematic review of papers attached to the main academic repositories. Although the hypotheses cannot be accepted, an important trend was found: the buyback intention begins to be positive from the impact of three contact points onwards. This research document also provides recommendations for the management of electrical appliance retail establishments, so that they can apply, to the best of their ability, improvements in their consumer understanding of omnichannel. Finally, this study makes a number of contributions to the omnichannel marketing literature. It establishes the starting point for future research related to this new phenomenon within marketing. / Tesis
|
4 |
Método de detecção automática da quantidade de carga em máquinas de lavar roupas / A method of load estimation in washing machinesPetronilho, Andre 22 April 2013 (has links)
Nesta dissertação apresentaremos um m´método para detecção automática da quantidade de carga adicionada em uma lavadora de roupas para que esta possa adequar o seu nível de água e ciclo de lavagem. A máquina na qual este algoritmo foi desenvolvido é uma máquina de eixo vertical (abertura na parte de cima) e utiliza um motor síncrono trapezoidal (BPM do inglês Brushless Permanent Magnet). O algoritmo que será descrito aqui utiliza uma rede neural para inferir a quantidade de carga baseado em informações disponíveis nesta m´máquina como, corrente do motor, velocidade do cesto e tensão de alimentação, entre outros, essas informações estão disponíveis na maioria dos modelos de máquinas de lavar roupas que utilizam esse tipo de motor. A utilização de um algoritmo para detectar automaticamente e de forma precisa a quantidade de roupas é muito importante, pois dessa forma evita-se o desperdício de insumos e, principalmente, água no processo de lavagem. Além disso apresentaremos os resultados que mostram a diferença entre o uso da rede neural e o método linear chamado planejamento de experimento (DOE do inglês Design of Experiments). / In this dissertation a method for automatic load size detection will be presented, so the water level and the washing cycles can be chosen by a washing machine. The machine where this algorithm was developed is a top load washing machine that uses a brushless permanent magnet motor (BPM motor). The algorithm that is going to be described here uses a neural network to deduce the load size based on information available on this machine such as, motor current, basket speed, power supply voltage and others. These signals are available on most washing machines that uses this kind of motor. The use of an algorithm that detects automatically and precisely the load amount is very important in order to avoid the waste of soap, bleach and softner and, more importantly, water during the wash task. Moreover the use of the neural network will be compared with a linear methods called DOE (design of experiment). Finally, results showing the difference between both methods are presented.
|
5 |
Modeling, Measurement and Mitigation of Power System HarmonicsNassif, Alexandre Unknown Date
No description available.
|
6 |
Modeling, Measurement and Mitigation of Power System HarmonicsNassif, Alexandre 11 1900 (has links)
Power system harmonics and interharmonics are power quality concerns that have received a great deal of attention in recent years. These phenomena can have several adverse effects on power system operation. The main harmonic and interharmonic sources are devices based on power electronics.
An emerging class of harmonic sources is comprised of power electronic-based home appliances. These appliances are dispersed throughout the low-voltage distribution system, and their collective impact can result in unacceptable levels of voltage distortion. The characterization of home appliances based on their harmonic currents is an important step toward understanding the impact of these devices. This thesis presents an evaluation of the relative severity of the harmonic currents from these devices, and the impact of the disparity of the harmonic current phase angles.
Typically, the voltage supplied to each harmonic source is already distorted. This distortion causes a change of the harmonic current magnitudes (traditionally referred to as the attenuation effect). Common harmonic analysis methods cannot take this variation into account because they use a typical harmonic current source model specified by a supply voltage having little or no distortion. This thesis characterizes the harmonic attenuation effect of power electronic-based appliances. One of the findings is that harmonic amplification, rather than attenuation, can occur under credible voltage conditions. This finding had not been made previously. In order to include the harmonic attenuation/amplification in appliance modeling, a measurement-based harmonic modeling technique is proposed.
One of the most economic and effective ways to mitigate harmonics in power systems is through the use of harmonic shunt passive filters. These filters can be of many topologies. Selecting these topologies is a task that, today, depends on the experience and judgment of the filter designer. An investigation is carried out on the common filter topologies, and the most cost-effective topologies for mitigating harmonics are identified.
As many of the larger harmonic loads also generate interharmonics, interharmonics have become prevalent in today’s medium-voltage distribution system. Mitigation cannot be carried out until the interharmonic-source location is known. A method for interharmonic source determination is proposed and then verified through simulation and field measurement studies.
|
7 |
Método de detecção automática da quantidade de carga em máquinas de lavar roupas / A method of load estimation in washing machinesAndre Petronilho 22 April 2013 (has links)
Nesta dissertação apresentaremos um m´método para detecção automática da quantidade de carga adicionada em uma lavadora de roupas para que esta possa adequar o seu nível de água e ciclo de lavagem. A máquina na qual este algoritmo foi desenvolvido é uma máquina de eixo vertical (abertura na parte de cima) e utiliza um motor síncrono trapezoidal (BPM do inglês Brushless Permanent Magnet). O algoritmo que será descrito aqui utiliza uma rede neural para inferir a quantidade de carga baseado em informações disponíveis nesta m´máquina como, corrente do motor, velocidade do cesto e tensão de alimentação, entre outros, essas informações estão disponíveis na maioria dos modelos de máquinas de lavar roupas que utilizam esse tipo de motor. A utilização de um algoritmo para detectar automaticamente e de forma precisa a quantidade de roupas é muito importante, pois dessa forma evita-se o desperdício de insumos e, principalmente, água no processo de lavagem. Além disso apresentaremos os resultados que mostram a diferença entre o uso da rede neural e o método linear chamado planejamento de experimento (DOE do inglês Design of Experiments). / In this dissertation a method for automatic load size detection will be presented, so the water level and the washing cycles can be chosen by a washing machine. The machine where this algorithm was developed is a top load washing machine that uses a brushless permanent magnet motor (BPM motor). The algorithm that is going to be described here uses a neural network to deduce the load size based on information available on this machine such as, motor current, basket speed, power supply voltage and others. These signals are available on most washing machines that uses this kind of motor. The use of an algorithm that detects automatically and precisely the load amount is very important in order to avoid the waste of soap, bleach and softner and, more importantly, water during the wash task. Moreover the use of the neural network will be compared with a linear methods called DOE (design of experiment). Finally, results showing the difference between both methods are presented.
|
8 |
Analýza výrobkového portfolia společnosti Whirlpool / Analysis of the Whirlpool CR, spol. s r. o. product rangeShejbalová, Adéla January 2010 (has links)
This master's thesis is focused on analysis of Whirlpool CR, spol. s r. o. product range. Main objective of this thesis is to analyse Whirlpool CR freestanding home appliances product range and suggest reccomendations for its optimalization. The theoretical part is devoted to methods for the analysis of macro-and microenvironment, which are then applied in practical part of work. Based on internal company data Whirlpool CR, spol. s r. o. is provided the analysis of the marketing mix. The analysis of range and recommendations for its optimization are performed with the Boston Consulting Group matrix.
|
9 |
[pt] INTEGRAÇÃO DE SUSTENTABILIDADE EM UMA INDÚSTRIA DE MÓVEIS E ELETRODOMÉSTICOS: DIAGNÓSTICO E RECOMENDAÇÕES ESTRATÉGICAS PARA A PENCO MÓVEIS SA / [en] SUSTAINABILITY INTEGRATION IN A FURNITURE AND APPLIANCES INDUSTRY: DIAGNOSIS AND STRATEGIC RECOMMENDATIONS FOR PENCO MÓVEIS SAARIEL COSTA TOZZI 11 December 2023 (has links)
[pt] O objetivo deste trabalho foi desenvolver recomendações para que a
Penco Móveis SA possa integrar a sustentabilidade de forma estratégica
nos seus negócios. As empresas não apenas enfrentam pressões crescentes
para se engajar com os desafios socioambientais atuais, mas também têm
a oportunidade de criar valor atendendo às necessidades da sociedade. Este
estudo de caso investigou o contexto competitivo, os temas relevantes para o
setor da companhia e o posicionamento de seus concorrentes. Além disso, as
práticas da companhia foram mapeadas e analisadas por meio de diferentes
metodologias para compor um diagnóstico que orientou as recomendações.
Concluiu-se que é relevante para a Penco desenvolver um plano de ação
abrangendo três pilares: desenvolvimento de competências internas e cultura
para a inovação, engajamento externo e atendimento de demandas atuais da
sociedade. / [en] The objective of this work was to develop recommendations for Penco
Móveis SA to strategically integrate sustainability into its business. Companies not only face increasing pressures to deal with current socio-environmental
challenges but also have the opportunity to create value by addressing societal
needs. This business case study investigated the competitive context, relevant
topics for the company s sector, and its competitors. Furthermore, the company s practices were mapped and analyzed through different methodologies
to build a diagnosis that guided the recommendations. It was concluded that it
is relevant for Penco to develop an action plan encompassing three pillars: the
development of internal competencies and a culture for innovation, external
engagement, and meeting current societal demands.
|
10 |
Integrated high-resolution modelling of domestic electricity demand and low voltage electricity distribution networksRichardson, Ian January 2011 (has links)
Assessing the impact of domestic low-carbon technologies on the electricity distribution network requires a detailed insight into the operation of networks and the power demands of consumers. When used on a wide-scale, low-carbon technologies, including domestic scale micro-generation, heat pumps, electric vehicles and flexible demand, will change the nature of domestic electricity use. In providing a basis for the quantification of the impact upon distribution networks, this thesis details the construction and use of a high-resolution integrated model that simulates both existing domestic electricity use and low voltage distribution networks. Electricity demand is modelled at the level of individual household appliances and is based upon surveyed occupant time-use data. This approach results in a simulation that exhibits realistic time-variant demand characteristics, in both individual dwellings, as well as, groups of dwellings together. Validation is performed against real domestic electricity use data, measured for this purpose, from dwellings in Loughborough in the East Midlands, UK. The low voltage distribution network is modelled using real network data, and the output of its simulation is validated against measured network voltages and power demands. The integrated model provides a highly detailed insight into the operation of networks at a one-minute resolution. This integrated model is the main output of this research, alongside published articles and a freely downloadable software implementation of the demand model.
|
Page generated in 0.0843 seconds