Thesis (DSc (Geology))--Stellenbosch University, 1948. / 375 leaves printed on single pages, preliminary pages and numbered pages1-312. Includes bibliography, figures and photos. / Digitized at 330 dpi color PDF format (OCR), using KODAK i 1220 PLUS scanner.

This study lias initiated with the aim of identifying the existence of any geochemical criteria which may be used to distinguish between the various volcanic formations within the Witwatersrand triad. The Witwatersrand triad comprises three sequences: the Dominion Group at the base, the Witwatersrand Supergroup in the middle, and the Ventersdorp Supergroup at the top. It is underlain by Archaean basement rocks, and covered by rocks of the Transvaal sequence. The Dominion Group consists of the sedimentary Rhenosterspruit quartzite Formation at the base, overlain by a bimodal component of the Syferfontein Porphyry succession of lavas. Basaltic lavas are the major component of the Rhenosterhoek Formation, while the overlying Formation consists primarily of dacitic porphyries. Intercalations of one lava type within the other are common, however, so each formation is not the exclusive domain of only one lava type. The Witwatersrand Supergroup, a predominantly argillaceous and arenaceous sequence, contains two narrow volcanic horizons, one of wbich, the Jeppestown Amygdaloid (now Crown Formation), consisting of tholeiitic andesites, occurs in the study area. The overlying Ventersdorp Supergroup has, at its base, the basaltic Klipriviersberg Group, of which four out of six formations are present in the study area, namely, the Alberton, Orkney, Loraine and Edenville Formations. This group is succeeded unconformably by the PIatberg Group, consisting of the sedimentary Kameel doorns Formation, followed by the (informal) Goedgenoeg, Makwassie Quartz Porphyry and Rietgat Formations. The Goedgenoeg and Rietgat Formations are basaltic, whil e the Mawassie rocks range from basaltic to dacitic, the majority being tholeiitic andesites and andesites . The Pniel sequence at the top of the Ventersdorp Supergroup consists of the sedimentary Bothaville Formation, and the Allarridge Formation, the lavas of which are basaltic with some andesitic tendencies. A well-defined geochemical stratigraphy was found to exist. From the eleven volcanic formations examined, nine distinct geochemical units emerged, as the Loraine and Edenville Formations were found to have the same geochemical characteristics, as did the Goedgenoeg and Rietgat Formations. Despite having undergone law-grade greenschist facies metamorphism, very clear variation patterns with height are displayed by the immobile elements Ti, P, Kb, Zr and Y, and the light rare earth elements La, Ce and Nd. In contrast, much scatter was observed in the variation patterns of Na, K, Mn, Ba and Rb. Three techniques were employed to effect discrimination between formations - orthosonal discrimination, interelement and ratio vs ratio plots, and discriminant analysis. Confidence limits placed on normal probability plots served to isolate outlier samples for further examination by the various discrimination techniques. A successful test of the efficacy of the discrimination techniques was afforded when fourteen samples from an unknown succession were positively identified as representative of the Klipriviersberg Group

D.Phil. Geology) / This study presents detailed petrographic, mineral-chemical and geochemical characteristics ofmafic intrusions from three iron oremining areas - Thabazimbi, Sishen and Hotazel - in southern Africa In addition, as themafic intrusions at the Thabazimbi, Sishen and Hotazel mines occur in close spatial association with iron and manganese ore, this study addresses the aspect of whether these intrusions have a bearing on the localization of these ores. Precise geochronologic data of these previously undated mafic dykes and sills is presented to classify them into a regional context. particularly in considering whether these dykes and sills are part of known Large Igneous Provinces (LIPs) in sonthem Africa. The Thabazimbi dykes are coarse grained dolerites while the sills are diabases. The dykes are younger than the sills. Composition wise, sills are dominantly basaltic andesites, while the dykes are dominantly hasaltic. Different to the sills, the dykes are characterized byrestriction of olivine, higher HFSE and LREE as well as less prominent negative Bu" anomaly. Geochemical and isotope chemical characteristics of the Thabazimhi dykes and sills are explained in terms of a combined partial melting, followed by fractional crystallization and crustal contamination with differentiation model. with the dykes showing greater crustal assimilation. The petrogenetic characteristics of the Sishen dolerite dykes in many ways resemble both the Colombia River Basalts and the typical Umkondo dolerites, and point to significant crustal contamination, typical of continental tholeiites. Geochemical characteristics of the Sishen dolerites is acconnted by the partial melting followed by fractional crystallization and crustal contamination, but unlike the Thabazimbi dykes and sills crustal assimilation is significant. At Hotazel, the petrographyand geochemistry of 'bostonites' bas been used to define their true composition while at the same time highlighting the presence of a -2 - 3 m thick iron ore unit associated with banded iron formation and manganese ore. Geochemically, the Hotazel 'bostonites' are "basaltic andesites' while textnra1ly, the Hotazel <bostonites' are essentially diabases. Regarding the iron ores that occurs in the Hotazel Formation at the base of the Pre-Mapedi nnconformity, they are composed of various forms of hematite with variable minor chlorite. quartz and carbonates. Iron ore genesis is attributed to supergene processes similar to those that have affected Sishentype iron ore below the Gamagara unconformity on the Maremane Dome. A U-Pb 2046.6±3.4 Ma age has been obtained for the crystallization of a Thabazimbi sill by dating titanite. This is interpreted to indicate that while the mafic/ultramafic component ofthe Bushveld Complex may have been emplaced over a short period, there was later magmatic activity at 2046 Ma, represented by the Thabazimbi sill and other late Bushveld Complex related intrusions such as the Uitkomst Complex at 2044 Ma. The 1044.3±7.5 Ma age obtained for the Sishen dolerites has resulted into two major interpretations. Firstly. the age is interpreted to be the minimum age for Umkondo LIP. The age shows that while large sections of the Umkondo LIP may have been emplaced within a short time interval, emplacement of end members ofthis LIP was in progress at least - 50 Ma later. Secondly. the age of these dolerites shows that they were emplaced subsequent to major iron ore genesis at Sishen. The new age. coupled with the limited extent ofthese intrusions shows that they played a no part in the origin ofthe bulk ofthe iron ore at the mine.

A plug-like intrusion of Karroo dolerite, near Dordrecht in the Eastern Cape of the Republic, is described. Field mapping with the, aid of aerial photographs has revealed that the contact of the intrusion, for the most part, dips very steeply outwards. In the south- eastern and eastern areas, however, sheet- or sill-like forms appear to be given off from the main intrusion. In plan view the intrusion is roughly oval shaped, its longer axis being aligned in a north-westerly direction. Its surface area measures approximately 60 square kilometres (24 square miles). A large number of xenoliths composed exclusively of Stormberg sediments, pyroclastic rocks and minor lavas, are to be found cropping out within the dolerite intrusion. These xenoliths, many of which occur in positions far above or below their normal stratigraphic elevation, are extremely variable in size - the largest having an area of approximately 15 square kilometres (6 square miles). The xenoliths represent fragments of the original "roof" of sediments and pyroclastics which have collapsed into and been engulfed by the dolerite magma. This type of dolerite intrusion is known as a "belljar" intrusion. A superficial classification of the dolerites, based chiefly on textural and certain mineralogical features, is presented. In the area surrounding the main intrusion are a number of dolerite dikes and sheets. The youngest phase of igneous activity is represented by the Dragon's Back dike, which cuts across the complex in a north-westerly direction. Several veining phenomena, as well as an interesting variety of metamorphic and metasomatic rocks, are associated with the main dolerite intrusion. Six diatremes are situated in the vicinity of the intrusion. Pyroclastic rocks are represented by a variety of types, and are to be found outside the area of the intrusion, and as xenoliths within it. A tentative interpretation of the mechanism of formation of the intrusion, which appears to be related to volcanic activity and cauldron subsidence, is presented.

Boreholes NG1 and NG2 were drilled on the farm Nooitgedacht 406 KQ to intersect the lower Critical and lower Zones of the western Bushveld Complex. The aim of this study is to describe the textural features and chemical characteristics of the olivine-bearing rocks in the intersections, as determined by petrographic studies, XRF analysis and microprobe analysis. The olivine-bearing rocks are dunites, harzburgites and olivine pyroxenites. They comprise olivine and orthopyroxene, with minor chromite, clinopyroxene and plagioclase, and their textures vary between adcumulate, mesocumulate and poikilitic. The sequence intersected can be broadly correlated with that in the eastern Bushveld Complex. Of the whole-rock inter-element ratios, the MMF (MgO)/[MgO+FeO])ratio is the clearest indicator of cyclicity. The olivine-rich rocks are more primitive than the associated rocks, and seem to become more primitive with height in most intervals. The plagioclase in the olivine-bearing rocks is unusually sodic in corrposition, having a maximum Na₂0 content of 8.12%. A comparison of olivine and plagioclase compositions with those in other intrusions has revealed that the only other major intrusion with sodic plagioclase is the Kiglapait intrusion of Canada. In the Kiglapait intrusion the sodic plagioclase occurs in conjunction with fayalitic olivine as opposed to the forsteritic variety of this study. Chemical variations in the rocks sampled indicate that periodic replenishment of the magma from which the rocks crystallised must have occurred. In some of the olivine-bearing intervals where little fractionation is evident, replenishment seems to have been continuous. In other intervals fractionation appears to have continued uninterrupted for significant periods, prior to rejuvenation by fresh influxes of magma.

In the Middelplaats mine area of the Kalahari manganese field, two drill holes (MP53 and MP54) intersected anomalously high-grade manganese ore sitting stratigraphically just above an igneous body (likely a dike or sill). Manganese ore located within approximate 5 meters of the contact with the underlying igneous rocks has been substantially metasomatically upgraded from 25 percent manganese, to over 40 percent whilst the dominant manganese species within the ore has been altered to hausmannite. This report demonstrates the metasomatic alteration is related to devolatilization (removal and/or remobilization of H₂O, CO₂ and CaO) due to contact metamorphism caused by the underlying igneous rocks. The Middelplaats mine is situated in the southwest corner of the Kalahari manganese field where the paleo basin shallows out and ends. Within the mine area, several stratigraphic units pinch out or are truncated by the side of the basin. This pinching out of lithological formations has led to the underlying Ongeluk Formation being in contact with the much younger units of the Hotazel Formation. Therefore, geochemical investigation into the nature and source of the igneous rocks was also undertaken to see if the rocks from the two drill holes were related to one another and/or the underlying Ongeluk Formation. Results of these geochemical studies have demonstrated that the Middelplaats igneous rocks (dolerites) from the two drill holes (MP53 and MP54) share a co-genetic source region. There is also reasonable geochemical evidence that the source region of the Middelplaats igneous rocks was substantially similar to the source region of the Ongeluk Formation. This may indicate that the source region of the Ongeluk Formation was reactivated at some later stage resulting in the emplacement of doleritic dikes or sills in the Middelplaats mine area. The Middelplaats igneous rocks were also found to have undergone a slight but pervasive potassic alteration; with most of the original plagioclase feldspar showing some level of replacement by a potassium enriched feldspar. Although no source for this potassic fluid was found, the devolatilization reaction within the manganese ore appears to have released some potassium into the surrounding rocks. This additional potassium may be responsible for some localized potassic alteration.

D.Phil. (Geology) / Please refer to full text to view abstract

The main magnetite seam of the Upper Zone of the Rustenburg Layered Suite (SACS, 1980) on the Bushveld Complex is known to host the world‘s largest vanadium bearing titaniferous iron ores. The vanadiferous titanomagnetites, contain vanadium in sufficient concentrations (1.2 - 2.2 per cent V₂O₅) to be considered as resources and vanadium has been mined historically by a number of companies among them Anglo-American, Highveld Steel and Vanadium and VanMag Resources as well as currently by Evraz Highveld Steel and Vanadium Limited of South Africa. The titanomagnetites contain iron ore in the form of magnetite and titanium with concentrations averaging 50-75 per cent FeO and 12-21 per cent TiO₂. The titaniferous iron ores have been historically dismissed as a source of iron and titanium, due to the known difficulties of using iron ore with high titania content in blast furnaces. The economic potential for the extractability of the titaniferous magnetites lies in the capacity of the ores to be separated into iron rich and titanium rich concentrates usually through, crushing, grinding and magnetic separation. The separatability of iron oxides and titanium oxides, is dependent on the nature in which the titanium oxide occurs, with granular ilmenite being the most favourable since it can be separated from magnetite via magnetic separation. Titanium that occurs as finely exsolved lamellae or as iron-titanium oxides with low titania content such as ulvospinel render the potential recoverability of titanium poor. The Upper Zone vanadiferous titanomagnetites contain titanium in various forms varying from discrete granular ilmenite to finely exsolved lamellae as well as occurring as part of the minerals ulvospinel (Fe₂TiO₄) and titanomagnetite (a solid solution series between ulvospinel and magnetite) . Discrete ilmenite constitutes between 3-5 per cent by volume of the massive titanomagnetite ores, and between 5-10 per cent by volume of the magnetite-plagioclase cumulates with more than 50 per cent opaque oxide minerals. The purpose of this research was to investigate the mineralogical setting and distribution of the iron and titanium oxides within the magnetitite layers from top to bottom as well as spatially along a strike length of 2 000m to determine the potential for the titanium to be extracted from the titanomagnetite ores. The titanomagnetites of the Upper Zone of the Bushveld Complex with particular reference to the Northern Limb where this research was conducted contains titanium oxides as discrete ilmenite grains but in low concentrations whose potential for separate economic extraction will be challenging. The highest concentration of titanium in the magnetite ores is not contained in the granular ilmenite, but rather in ulvospinel and titanomagnetite as illustrated by the marked higher concentration of TiO₂ in the massive ores which contain less granular ilmenite in comparison to the disseminated ores which contain 3 to 8 percentage points higher granular ilmenite than the massive ores. On the scale of the main magnetite seam, the TiO₂ content increases with increasing stratigraphic height from being completely absent in the footwall anorthosite. The V₂2O₅ content also increases with stratigraphic height except for in one of the 3 boreholes where it drops with increasing height. The decrease or increase patterns are repeated in every seam. The titanomagnetites of the main magnetite seam display a variety of textures from coarse granular magnetite and ilmenite, to trellis ilmenite lamellae, intergranular ilmenite and magnesian spinels and fine exsolution lamellae of ulvospinel and ferro-magnesian spinels parallel to the magnetite cleavage. The bottom contact of the main magnetite seam is very sharp and there is no titanium or vanadium in the footwall barely 10cm below the contact. Chromium is present in the bottom of the 4 layers that constitute the main magnetite seam and it upwards decreases rapidly. In boreholes P21 and P55, there are slight reversals in the TiO₂ and V₂O₅ content towards the top of the magnetite seams.