Le but principal de ces travaux de thèse fut la conception et la réalisation de biocapteurs par utilisation de méthodes de transduction sans marquage, comme la spectroscopie d’impédance électrochimique (EIS), pour la détection de cible d’intérêts. Pour cela, différentes architectures moléculaires, spécifiques à la molécule d’intérêt ciblée, ont été développées afin de permettre la transduction du signal issu de la reconnaissance entre le biorécepteur et son substrat, et conduire ainsi à la détection de la cible.Les systèmes mis au point reposent sur l’intégration de nanomatériaux, tels que les nanotubes de carbones ou le disulfure de tungstène, pour assurer l'immobilisation de l'entité biospécifique à la surface du capteur. L’intérêt de ces matériaux est multiple puisqu’ils permettent une très forte augmentation de la surface spécifique du système et sont également mis à contribution lors de la fonctionnalisation de la surface de l’électrode. Un des grands défis rencontré dans le développement des biocapteurs étant la stratégie d'immobilisation de l'entité biospécifique sur la surface du capteur.Ces travaux se sont donc dans un premier temps intéressés à la réalisation et à la caractérisation de films minces de ces nanomatériaux ainsi qu’à leur transfert à la surface d’une électrode. Dans ce contexte, le but est de concevoir des bioarchitectures poreuses à base de polymères fonctionnels électrogénérés autour des nanostructures de carbone permettant la pénétration de grandes biomolécules comme des anticorps pour développer des immunocapteurs de haute performance.La seconde partie de ce travail s’est donc orientée vers la conception de biocapteurs par utilisation de ces différents matériaux. La fiabilité du procédé de la construction de ces nanostructures poreuses a été validée par la conception de systèmes immunologiques pour la détection de l’anticorps de l’antitoxine du choléra et l’anticorps de la toxine de la dengue.Enfin, un dernier biocapteur enzymatique, s’appuyant sur l’utilisation de nano-bâtonnets de disulfure de tungstène, a été développé. Ce dernier permet la détection de deux molécules d’intérêts, à savoir le catéchol et la dopamine, par utilisation de la polyphénol oxydase. / The main purpose of this work was the design and the development of biosensors by using non-marking transduction methods, such as electrochemical impedance spectroscopy (EIS), for the detection of targets of interests. To this end, various molecular architectures have been developed to allow the transduction of the signal resulting from the recognition between the bioreceptor and its substrate, and thus lead to the detection of the target.The systems developed are based on the integration of nanomaterials, such as carbon nanotubes or tungsten disulfide, to ensure the immobilization of the biospecific entity at the surface of the sensor. The advantages of these materials are multiples, since they allow a very large increase in the specific surface area and are also used in the functionalization of the surface of the electrode. Indeed, one of the major challenges encountered in the development of biosensors is the strategy involved in the immobilization of the biospecific entity on the surface of the sensor.This work was initially interested in the realization and characterization of thin films of these nanomaterials as well as their transfer to the surface of an electrode. In this context, the aim is to design porous bioarchitectures based on electrogenerated functional polymers around carbon nanostructures allowing the penetration of large biomolecules such as antibodies to develop high-performance immunosensors.The second part of the work was oriented towards the design of biosensors using these different materials. The reliability of the process has been validated by the design of immunological systems for the detection of the anti-cholera toxin antibody and dengue toxin antibody.Finally, a last enzymatic biosensor, based on the use of tungsten disulfide nano-sticks, has been developed. The latter allows the detection of two molecules of interest, catechol and dopamin, by the use of polyphenol oxidase.

This dissertation explores the different ways to create thin film-based biosensors that are capable of rapid and label-free detection of cortisol, a non-specific biomarker closely linked to stress, within the physiological range of 10pM to 10 uM. Increased cortisol levels have been linked to stress-related diseases, such as chronic fatigue syndrome, irritable bowel syndrome, and post-traumatic stress disorder. It also plays a role in the suppression of the immune system as well. Therefore, accurate measurement of cortisol in saliva, serum, plasma, urine, sweat, and hair, is clinically significance to predict physical and mental diseases. In this dissertation, thin film-based electrochemical immunosensors were fabricated using a self-assembled monolayer (SAM) functionalized by cortisol specific antibodies to detect cortisol at 10 pM level sensitivities in the presence of a redox probe. The fabricated electrochemical cortisol immunosensors were able to detect cortisol in human saliva samples and the outcomes were validated using the standard Enzyme Linked Immuno Sorbent Assay (ELISA) technique. With the aim of improving signal amplification and label-free cortisol detection, copper nanoparticles were incorporated on screen-printed carbon electrodes (SPCE) for the fabrication of electrochemical cortisol immunosensor. This SPCE-based sensor showed a sensitivity of 4.21µA/M and the limit of detection 6.6nM. Both the SAM and SPCE-based immunosensors were not thermally stable due to the instability of antibodies at room temperature. To address this issue, an antibody-free immunosensor was fabricated. Molecular Imprinted Polymer (MIP) was used to template the target cortisol molecule. The MIP-based sensing platform was prepared using polypyrrole, a thermally stable conducting polymer. The conductivity of the polymer ensured good electrical performance. The polypyrrole-based MIP was synthesized by means of electrochemical polymerization and was used to detect cortisol within the physiological range at room temperature. MIP-based sensors exhibited the detection limit of 1 pM, and were cost-effective, easy to fabricate, temperature stable, and reusable. The sensing performance of the resulting sensors was comparable to those of commercially available technologies, such as ELISA. Aiming to perform cortisol sensing at point-of-care (POC), an Extended Gate Field Effect Transistor (EGFET) was integrated with a developed MIP cortisol sensor. The as developed MIP-EGFET sensor was used to detect the cortisol concentration in the range of 1 pM to 100 nM. A few of the major advantages of the developed sensor are its ability to provide a direct readout and simpler electronic systems, which are necessary for miniaturized Point of Care devices.

Au cours des dernières décennies, les capteurs et les biocapteurs électrochimiques ont connu un développement considérable en raison de leur simplicité, fiabilité, rapidité et sélectivité. Ils ont constitué les alternatives les plus séduisantes pour les méthodes analytiques classiques dans des domaines aussi variés que l'agro-alimentaire, la médecine et la biologie clinique, ou le contrôle de la qualité de l'environnement. Dans ce travail de recherche, nous nous sommes intéressés, dans un premier volet, aux développements des immunocapteurs et capteurs électrochimiques à base des polymères à empreintes moléculaires (MIPs) pour le contrôle de la qualité des miels. La première partie de ce volet concerne le développement des immunocapteurs sur des structures dites Bio-MEMS basées sur des microélectrodes en or. L'élaboration de ces immunocapteurs a été dédiée à la détection des résidus d'antibiotiques à savoir la sulfapyridine (SPy) et la tétracycline (TC). Une nouvelle structure des nanoparticules magnétiques (MNPs) revêtues du copolymère poly (acide pyrrole-co-pyrrole-2-carboxylique) a été exploitée dans ces travaux pour leur réseau d'immobilisation tridimensionnel ainsi que pour leur stabilité pendant de longues périodes. La détection de la SPy et de la TC a été réalisée par différentes approches compétitives en utilisant des anticorps polyclonaux. Dans la deuxième partie de ce volet, nous avons fabriqué des capteurs à base des MIPs pour la détection de la sulfaguanidine, la doxycycline et le chloramphénicol dans le miel. Ces dispositifs ont été développés sur la surface des électrodes sérigraphiées en or en employant une matrice polymérique du polyacrylamide en présence des molécules empreintes. Les performances de ces capteurs et biocapteurs (limite de détection, sélectivité, reproductibilité, application dans les milieux réels) ont ensuite été évaluées. Dans un deuxième volet, nous nous sommes parvenus à appliquer un dispositif de la langue électronique voltammétrique (Langue-EV) pour des analyses agroalimentaires et biomédicales. Dans un premier temps, nous avons discriminé les miels issus de quatorze régions de la France et du Maroc par le dispositif de la Langue-EV. Nous nous sommes aussi parvenus à démontrer la fiabilité de ce dispositif à prédire les résultats des différents paramètres physico-chimiques d'après les réponses des méthodes analytiques utilisées. Dans un deuxième temps, nous sommes passés à l'application du dispositif de la Langue-EV en analyse biomédicale dans le but de discriminer les urines des patientes souffrants des infections urinaires avec celles des femmes saines / In recent decades, the use of electrochemical sensors and biosensors have grown considerably due to their simplicity, reliability, rapidity, and selectivity. They were the most attractive alternative tools for conventional analytical methods in various fields such as food control, medicine, and clinical biology or environmental control. In this research works, we focused, in the first part, on the development of immunosensors and electrochemical sensors based on molecularly imprinted polymers (MIPs) for the quality control of honey. In the second part, we managed to apply a voltammetric electronic tongue (VE-tongue) for food monitoring and biomedical analyzes. The first part of our research work concerns the development of immunosensors based on gold microelectrodes of the Bio-MEMS devices. The development of these immunosensors was dedicated to the detection of antibiotic residues namely sulfapyridine (SPy) and tetracycline (TC). A new structure of magnetic nanoparticles (MNPs) coated with the poly (pyrrole-co-pyrrole-2-carboxylic acid) copolymer has been exploited in this work for their three-dimensional immobilization network as well as for their stability for long periods. The detection of SPy and TC was performed by different competitive approaches using polyclonal antibodies. In this part, we have also synthesized the MIP sensors dedicated to the detection of sulfaguanidine, doxycycline, and chloramphenicol in honey. These devices have been developed on the surface of the screen-printed gold electrodes by employing a polyacrylamide matrix in the presence of the target molecules. The performances of these sensors and biosensors (limit of detection, selectivity, reproducibility, applications in real samples) were then evaluated. Regarding the second part of our research works, it involved the discrimination between honeys from fourteen regions from France and Morocco. We have succeeded in demonstrating the reliability of this device in predicting the results of the different physico-chemical parameters of honey samples according to the responses of the used analytical methods. In other steps, we proceeded to the application of the VE-tongue in biomedical analyzes to discriminate urine specimens of patients suffering from urinary tract infections and those of healthy subjects

Study of biosensors has become an essential part of research in biotechnology. Biosensors as fast, portable, highly sensitive, and low-cost bioanalytical detection devices have been utilized in many fields of human activity. The first part of the presented work focuses on electrochemical biosensors for rapid environmental screening of herbicides as water pollutants. A sol-gel immobilization method for a photosystem II (PSII) complex is studied in order to enhance the sensitivity and the signal strength and stability of a PSII-based biosensor. Computer simulations of a PSII biosensor are employed with the aim to find out how the immobilization membrane properties influence the biosensor parameters. Newly developed immobilization by a thin-layer membrane based on the results of computer simulations and revised measurement protocols are presented. The second part of the work is devoted to synthesis and electrochemical detection of newly developed metal labels for electrochemical immunosensors. The synthesis of dendrimer-encapsulated silver nanoparticles and biorecognition properties of biotin-nanocomposite conjugates are discussed. For detection of synthesized labels, a microfluidic detector was manufactured and tested and different approaches to packing of a microfluidic chip employing polydimethylsiloxane (PDMS) were investigated. Newly designed microstructures for a microfluidic separator of magnetic beads (MBs) were studied by computer simulations. The separator was made and trapping of MBs for the further employment in MBs-based immunoassays are presented