This project, elaborated within the Engineer Diploma studies of the 2307 branch, presents a design of a production technology of a mobile phone plastic cover. A technology of injection of plastics on the Demag Ergotech 80 injection machine has been designed on he basis of belles-lettres of injection of plastics and calculation. A shedder has been used to eject the parts. Material ABS NOVODUR P2H – AT (manufacturer: Bayer) has been used to produce the part. The mould is designed with the axial injection technology (perpendicularly to the dividing plane), closing force is 800 kN.

This Diploma contains theme of injection of plastics. The theoretical section is focused on polymeric materials, their dividing and characteristics. From technologies for processing plastic is chosen injection of plastic, suitable for production technology of plastic switch frame. After that follows design of injection mould including calculation and designing drawing underlaid technical economic evaluation.

This master´s thesis deals with the complex manufacturing technology of plastic injection moulding. Literary work summarises knowledge of thermoplastic injection, thermoplastic bonding and choosing the right material for the given product. The reaction between the product and chemical substances plays a key role when choosing the right material. Therefore polypropylene is chosen for its high chemical and mechanical resistance. The given material is defined by technological data and technological process is proposed. A single-purpose injection mould for an existing injection machine is proposed for manufacturing the plastic mixing body tube corpus.

Master’s thesis deals with selection of a proper technology for manufacturing of chosen plastic part. The beginning of thesis contains part survey. Plastic injection was chosen as the most suitable manufacturing technology. Required theoretical knowledge for plastic injection mould designing were extracted in the recherche. Individual chapters deals with plastics, their manufacturing and plastic injection technology with all required knowledge about this technology, machines and moulds. Designing chapter contains every required calculation for mould design and all individual sections of mould design and injection machine selection. Injection simulations and their evaluations are part of this thesis aswell. Assembly and forms drawings as well as other documents used during thesis processing are included in the attachments.

This thesis describes a design of an injection mould for plastic part "Sleeve", that is intended for guiding of sliding door hardware. The part is manufactured from PE-HD, production quantity is 3 000 000 pcs annually. Based on calculations and review of specialized literature the design utilizes hot runners of MH system by Ewicon. The tool is assembled from normalized components by Hasco and an injection press BOY22D was suggested for parts production. Total costs for production of 1 part are 0,26 CZK.

This thesis deals with the production of a plastic body of the aperture by the method of injection moulding. The work includes a design of the injection mould for the given component. First, an appropriate material for the moulded piece was chosen and then the necessary calculations for the injection mould were made. A quadruplex injection mould with a heated inlet nozzle and pullout cores was designed based on these calculations. Modular components were chosen when designing the injection mould. The next part of the thesis contains the selection of the injection moulding machine for the given mould. The conclusion contains a technical-economical evaluation including the cost estimating for the injection mould and cost estimating for one moulded piece.

This project has been developed within the master study of Engineering Technology and Industrial Management a design of manufacturing technology for plastic cogwheel is introduced. The cogwheel will be produced by plastic injection moulding. POM material with a trade name Delrin 100 NC010 from DuPont Company will be used. An injection mould is a tool for producing a plastic cogwheel using injection moulding technology. Production will take place on the machine Allrounder 420 C Golden Edition 1000-290 from Arburg German Company headquartered in Loßburg, where the seat of parent company is situated.

The diploma thesis pointed out the possibility of using rapid prototyping methods in the field of plastic injection, specifically to make shaped inserts into the injection mold. The universal frame of the injection mold was used and only the shaped inserts were changed. The main part of the work was the construction of an injection mold with the subsequent practical production of shaped inserts for a specified part. In the introductory part, a theoretical search was performed, about which production methods in combination with suitable materials could be theoretically used. Furthermore, the polyjet and DLP methods were chosen, which were used to produce components (core and cavity). The result of the diploma thesis was a summary of all parameters, comparison of materials and production methods. Polypropylene and polyamide 6 materials were injected into the injection mold, from which the first prototype products were made. Instructions for the production of shaped inserts with the recommended technology and material were created for the selected type, which could be used in practice.

This thesis is concerned with the appropriate design of manufacturing technology for plastic program disc including the design of plastic printing technology. At the beginning of this thesis was made an analysis of requirements for manufactured device including selection of the most appropriate technology for its manufacturing – plastic injection. In the theoretical part are described all skills needed for designing and construction of the injection mould. Partial theoretical parts are concerned with the issue of plastic materials, tools and engines for injection, and of plastic printing technology. Practical part is concerned with description of design of each single system inside the injection mould including calculation. On the basis of these calculations was selected the appropriate injection engine. The end of the practical part is concerned with the selection of the appropriate engine for printing on the plastic device which is manufactured by the technology of plastic injection. For construction of the injection mould were applied normalities of the Hasco Company and the 3D CAD system Solidworks. The conclusion of this thesis achieves the technical- economical evaluation for manufacturing of designed plastic device.

The goal of this project is design of manufacturing technology for door elastomer grommet in a series of 400 000 units per year. As a proposed solution of manufacturing technology has been chosen multicomponent injection moulding. Appropriate thermoplastic elastomer and polyamide was chosen based on the knowledge gained in theoretical study of materials and technologies elaborated in the second part of the project. Moreover, the shape of the door grommnet was redesigned in accordance with the chosen technology. Working machine was chosen from manufacturer Arburg, model Allrounder 630S in a two-shot design, complemented by the index unit. A cost of production of one piece of the door grommet was determined in an economic evaluation. This cost was compared with current cost of production and new technology reducing manufacturing costs of one series by 25%.