This dissertation thesis deals with determination of the mechanical properties of weld materials based on instrumented hardness test. This work was caused by the research project between IAM Brno Ltd and CEZ corp., when the task was to develop a methodology for evaluation of mechanical material properties using NDT methods. For these reasons the development of methodology is reflected especially for use in practice focusing to determining the mechanical properties of the heterogeneous weld joint on the assembled equipment. The mechanical material properties are determined by carrying out non-destructive tests of the instrumented Vickers hardness. The developed methodology for determining of basic mechanical properties is based on the principle of inverse FEM modeling of the instrumented hardness tests, when output of the testing is indentation curve and measured surface imprint after unloading. The basic material mechanical properties are achieved by comparing the outputs of the experimental instrumented hardness tests and the outputs of the modeled hardness test using FEM.

This thesis describes what the theatre is and what types of machinery can be found there. Then the issue of stage technical machinery is presented into the czech context, respectively into the Europian legislation with the emphasis on the technical norms usage, which are necessary to fulfil in order to reach this aim. In the next part of the thesis is made the analysis of control systems, which are used in the stage technics with the emphasis on the functionality of these control systems, since this functionality determines number and range of possible danger and dangerous events, later on. These dangerous situations are named and specified in detail, thereby their existence, importance and necessity of solution is being emphasized. There is also a possible solution outlined that these dangerous events can be solved in many cases by using of these programmable systems relating to the safety, thereby safety functions realized by these functions. Then the single steps are described into V-model with appropriate documents of these V-model steps. Outcome of this thesis will be suggested model of method and its development and software validation for programmable and control systems in theatre technology.