No description available.

This master thesis deals with problems of determining operational and safety risks at gas boiler room in office building with total output of 4×49 kW. The gas boiler room is equipped with four boilers Geminox THRi 10-50. The aim of this master thesis is to determine the potential operational and safety risks of gas boiler room. The master thesis is divided into several parts, when the first part is describing the current situation with some theoretical knowledge and risk analysis. This part also outlines possible solutions for identification and quantification of risks to the gas boiler room. The specific risk factors are determined at other part of master thesis and there is also their analysis, which is solved by cause and effect diagram and by Failure Mode and Effect Analysis. The specific precautions are suggested for chosen risks in final part of master thesis.

The task of the diploma thesis was the theoretical and experimental design of radiators for the central heating and the prepartion of conceptual design for a pension with a wellness centre in Ostrava. The building is a free-standing three-to five-floor cellarless building. The heating system will be designed for pension rooms and a social base; within the wellness centre, the heating of a fitness centre, whirlpools, and locker rooms will be designed. The heat source will be a gas boiler house. Ventilation in the accommodation part will be natural and forced in the wellness centre with respect to thermal comfort of visitors.

The first part of the thesis deals with the issue of indoor climate in school buildings. The second part deals with the design of the heating system in the extension of the primary school, including the design of the source and the reconstruction of the source for the existing building in a variant solution. The last part of the thesis is devoted to experimental measurement of indoor air quality in elementary school.

This thesis describes the design of boilers for wood chips in a gas boiler house. Consisting of boiler house design from concept design suitable heat source to design components necessary for the proper functionality of the boiler house. Part of thesis is compilation of a functional diagram and design of possible solutions.

The diploma thesis is focused on district heat supply, heat sources, machinery and safety equipment of boiler rooms. The main goal of the thesis is to modernize parts of the heat sources with the respective boiler room equipment in accordance with the latest available technology. The generated thermal energy is used for heating or hot water production for residential and non-residential buildings in the vicinity of the boiler room. In the theoretical part, the thesis focuses in more detail on boiler rooms, specifically on heat energy sources, machinery and safety equipment of boiler rooms, system ventilation and combustion exhaust. The findings are applied in the design of the new boiler room layout. It is followed by a detailed description of the current state of the boiler room and heat networks. An essential part of the work is the assessment of layout of the current heat sources and the creation of a new design for the replacement of insufficient sources and related equipment. The last goal is an economic overview of the designed project solution.

This dissertation contains a comparison of the real possibilities for heating reconstruction and TUV reheating in three public buildings (located nearby one another) in Budišov township, with resulting recommendations of the best options for local operating conditions. The dissertation contains calculations of heating requirements for particular buildings, a generic theoretical part which summarizes basic data concerning long-term fuels (biomass and natural gas), proposals for technical solutions to heating sourcing concerning these fuels and its prospective distribution from a central boiler house, and its reciprocal comparison from the perspective of the economics of actual realization and operation, and from a perspective of fuel availability and ecology.

Thisdiplomathesisdealswiththedesignofamonitoringsystemforsolidfuelboilers.The first describes the sensors most commonly used in boilers room including a description of the principle of operation. The main content of the thesis is the design of the own boiler monitoring system. First the appropriate structure of the entire system is selected followed by the detailed design of individual parts of the device electronic wiring and selection of suitable sensors. The result of the thesis is the basis for the production of the proposed device and created service program.

A steel construction, divided into two parts, was designed for the building object of a production block of a bio power plant. The two parts separate the boiler room and the engine room. Due to the specific load caused by the operation equipment, also several plateaus, consoles, footbridges and technological constructions were designed. A system of principal pillars HEB, transversely frame-connected with plane solid girders IPE, forms the hall construction. Pillars in rows 1 and 4 are rigidly jointed to foundations. A bearing structure of the roof deck is imposed on the girders. It is composed of a system of purlins – rolled profiles type UPE. The rigidity of the roof is secured by horizontal bracing between the purlins. The construction of the boiler room is attached to the construction of the engine room, which is formed of frame-connected principal pillars HEB in rows 4,7 and 8. The roof truss IPE is designed for 12 900 mm span between rows 4 and 7 and for 4 800 mm between rows 7 and 8. The spatial rigidity of the structure is not only secured by the rigid connection of pillars and foundation combined with the frame-connected roof rungs. It is mainly maintained thanks to the system of vertical wall bracings interacting with the horizontal bracing of the roof. Between the pillar rows B, C, D, E, F and G and 8 to 9 a construction of a substation is attached. In the engine room is situated technological structure. The construction is formed by supporting frames consisting of pillars type HEA, rungs type IPE and HEA and vertical bracing of rolled profiles. Pillars type HEA are connected to foundation using articulated connection. The rigidity of the structure is secured both ways by vertical bracing and by the connection of the plateau beams with the hall girders.

Diploma thesis deals with problematics of offtake of flue gasses. In experimental part there was measured compound of flue gasses by analyzator of flue gates. Aplication is a project of heating of object of The Academy of Sciences of the Czech Republic in Brno. Project solves design of heating system, flue and of source of heat. Heating area is created by floor convectors,towel rails and radiators. Source of heat is designed in two variants : as a cascade of condensation boilers and as a cascade of low-temperature boilers.