This study investigates electrochemical oxidation of m-cresol on boron-doped diamond electrode using direct current voltammetry (DCV), differential pulse voltametry (DPV) and cyclic voltammetry (CV). In aqueous media in pH range 2.0 - 12.0 m-cresol provides one oxidation peak. The electrode reaction is diffusion-controled. Because of electrode passivation two types of pretreatment were applied for reactivation of electrode surface., i.e. alumina polishing and anodic activation using potential of +2400 mV. Peak heights and potentials are strongly dipending on the type of pretreatment for DCV and DPV - the difference in peak potentials can reach 430 mV. Using optimal conditions for alumina polishing in 0.01 μmol·L-1 NaOH the linear dynamic range is 1.0 - 75 μmol·L-1 for DCV and 0.75 - 75 μmol·L-1 for DPV. And for anodic activation in BR buffer pH 2.0 the linear dynamic range is 0.75 - 75 μmol·L-1 for DCV and DPV. The influence of boron-doping level was investigated using a semiconductive and mettalic-type BDD film. For the latter the sensitivity in DP voltammetry is two times higer and for both types the linear dynamic range is ca 1 - 25 μmol·L-1 . The voltammetric response of m-cresol was further investigated in the presence of cationic surfactants. In the presence of CTAB and CPB the peak current...

In this work, the application of boron-doped diamond electrodes with various surface pre- treatment were tested on selected oxidizable and reducible model compounds, specifically para and ortho cresols and 2'-deoxycytidine and 7-deazaadenosine labeled by 4-nitrophenyl triazole. The aim of the study was the investigation of electrochemical and adsorptive processes with respect to the development of electroanalytical methods of detection of the selected compounds, or utilization of boron-doped diamond electrodes as detectors in liquid-flow systems. Cresols were used as the model oxidizable compound. On O-terminated and polished boron- doped diamond electrodes, cresols provide oxidation signal owing to their oxidation to methylphenoxy radical at comparable potentials as on other carbon-based electrodes used as a reference in this work, i.e., glassy carbon electrode, pyrolytic graphite electrode, and carbon paste electrode. These carbon electrode materials show relatively high propensity to adsorption of reaction products, while such adsorption is minimal on boron-doped diamond. In situ anodic activation allows for a rapid regeneration of boron-doped diamond surface prior to each scan. A differential pulse voltammetric method that was developed with a detection limit of 0.61 mol∙l-1 to 2.97 mol∙l-1...