The objectives of this work is residual lifetime of heaters in petrochemical industry. There is no comprehensive publication about this theme. This paper lists and describes the most of main phenomena that has to be taken into account in the process of determination of residual lifetime. This paper focuses on creep damage of a real heater based on deformation measurement. It describes some heater failures that could cause unplanned operation interruption however, appropriate intervention made possible safe heater operation until planned heater shutdown. No compact method is given how to determine heater residual lifetime, but a direction is given how a complex method of residual lifetime assessment of refinery heaters could be created.

This paper deals with the variability of HRF, which may have crucial impact on outcomes of fMRI neuronal activation detection in some cases. There are three methods described - averaging, regression deconvolution and biconjugate gradient method - which provide HRF shape estimation. In frame of simulations regression method, which uses B-spline curves of 4-th order for window length of 30 s, was chosen as the most robust method. Deconvolution estimates was used as HRF models for classic analyse of fMRI data, concretely visual oddball paradigm, via general linear model. Enlargement of localizated areas was observed and after expert consultation with scientific employees from neurology clinic, outcomes was evaluated as relevant. Furthermore Matlab application, which provides confortable observation of HRF variability among brain areas, was made.

The main objectives of this thesis are to study theory of signal averaging, filtered residue method and methods of stretching/shrinking signal. It will also test the functionality of those methods. Thesis contains theoretical analysis, explanation of principles and testing of behaving of used methods.

This diploma thesis is a case study focused on the concept of the voting bonus for mayors, which it further expands. Voting bonus for mayors shows whether mayors have an advantage against their opponents and if so, how great this advantage is. It uses a dataset of mayors from all cities in the Czech Republic, whose population exceeds 10 000. These mayors were first elected to the office between years 2002 and 2014. The thesis itself examines the very concept of the voting bonus for mayors from several different angles. The first part of the thesis is devoted to the voting bonus in the municipal elections. It builds on previous research and addresses not only the advantage for mayors in their second elections but in all of the following elections. It also examines the bonus that mayors bring to their political parties. In addition, it shows the difference between the basic voting bonus for mayors and its advanced concept which counts with voter turnout. The second part focuses on the voting bonus for mayors in regional elections. It distinguishes between two things. First are the election results in the mayor's city and second are the results in the entire region. A significant part of the work is a comparison of those two results which shows the role of mayors in the regional elections. The thesis...

Diploma thesis is concentrated on the phenomenon called coocurance of primary prepositions. It is a construction of two prepositions directly standing next to each other, where each of them is part of another prepositional phrase. The first preposition is not directly in front of its phrases, but there is the second prepositional phrase inserted between the first preposition and its phrases. The aim of the thesis was to find these structures in the corpus SYN2009PUB, and their description of the semantic and formal aspects. Inserted phrase is in most cases syntactically incorporated into sentence, where takes the adverbial or object distinction. Comparison in length (in number of words) of inserted phrase with the phrases, which can be inserted, showed that during insertion depends on the length of the transferred phrases. The paper outlines other factors affecting coocurence, e. g. pronounceability.

The thesis completes the current programming equipment for experimental measurement of isolated animal heart signals. It adds a block providing the pre-processing of the signals. The signals measured are the elektrogram (EG) and the action potential (AP). The origin of individual signals, the measuring method and the possibilities of noise elimination are dealt with in the theoretical part of the thesis. The practical part describes the pre-processing block securing the noise elimination during the AP. It uses accumulative methods of averaging the corresponding time periods of the AP. Based on the results of measuring the signal to noise ratio, the thesis suggests the most appropriate accumulative methods and their variables. In order for the chosen accumulative methods to work well, it is important to divide the AP process into sectors of corresponding shape (repeats). The connection between the EG and AP processes is used to determine the beginning and end of the sectors. These points are identified by the detection of R and T wave peaks in the EG. To detect the R and T waves, the thesis uses methods based on wavelet transform. The efficiency and accuracy of detection methods is verified by test EG signals with hand-marked R and T wave peaks.

The thesis deals with the biological data averaging applied to a periodical and repetitive signal, specifically to an ECG signals. There were used signals from MIT-BIH Arrhythmia database and ÚBMI database. Averaging was realized with constant, floating and exponential Windows, where was used the method of addition of the filtered residue. This method is intended to capture the slow variations from the input to the output signal. The outcomes of these methods can be used as a basis for further work, or function as an example of principled methods. Methods and its outcomes were created in Matlab.

The main content of the diploma thesis is the strength calculation of the heat exchanger according to ASME Code. The introduction is a summary of issues within the design of this equipments. In the practical part there are a strength calculation of the main parts of heat exchanger and the FEM analys with their evaluation. In the last part there is the calculation of cumulative damage.

Práce se zabývá tvárným lomem, který je výsledkem víceosého kvazi-statického monotónního namáhání doprovázeného rozsáhlými plastickými deformacemi, přičemž pro degradaci materiálu je uvažován lokální přístup. Ve výpočtech o rozvoji poškození rozhodují použité mezní podmínky tvárného lomu. Tyto byly teoreticky studovány v úvodu práce a po výběru vhodné mezní podmínky byl stanoven postup kalibrace. Dále byl rozpracován plán měření a realizovány zkoušky při pokojové teplotě na slitině hliníku 2024-T351, zahrnující tah, krut a tlak, pro studium rozvoje poškození a věrohodnou kalibraci vybraného fenomenologického modelu tvárného porušování, vyjádřeného pomocí lomového přetvoření a závislého na hydrostatickém tlaku a deviátoru tenzoru napětí. Mezní podmínka tvárného lomu byla posléze svázána s podmínkou plasticity. Plasticita byla pro zkoumaný materiál uvažována ve tvaru zohledňujícím i stav třetího invariantu deviátoru tenzoru napětí. Celý navržený přístup, plně aplikovatelný na víceosé úlohy, byl implementován pomocí uživatelské rutiny do komerčního programu založeného na explicitní variantě metody konečných prvků. V závěru práce je předložena aplikace navrženého přístupu k modelování tvárného porušování v podobě verifikace na vybraných zkušebních testech, z níž plynou závěry a doporučení pro další práci.

This master thesis deals with the origin of goods which is one of the key concepts in international trade. The origin of goods signifies the country where were acquired and processed. The country of origin is defined by the rules of origin and then it could be preferential or non-preferential. The first aim of this work is to explain correct proof and determination of the origin of goods, especially the emphasis is put on preferential origin of goods in the EU. The cumulation of goods is an important part of this thesis that plays the role by the producer's decision from where certain materials would be imported. The entry of the Czech Republic to the European Union stood for the acceptance of the common trade policy but also the Czech customs administration and customs policy as a whole were transformed. The final part of the work is dedicated to their competences and responsibilities.