Thesis (M.S.)--University of Wyoming, 2008. / Title from PDF title page (viewed on Apr. 1, 2010). Includes bibliographical references (p. 48-51).

Thesis (Degree of Aeronautical Engineer)--Naval Postgraduate School, June 1969. / Thesis advisor(s): Miller, James A. "June 1969." Description based on title screen as viewed on May 10, 2010. DTIC Descriptor(s): Incompressible Flow, Laminar Boundary Layer, Transformations (Mathematics), Matrices (Mathematics), Oscillation, Perturbation Theory, Taylors Series, Flow Charting, Subroutines, Computer Programs, Theses. DTIC Identifier(s): Computerized Simulation. Includes bibliographical references (p. 96-97). Also available in print.

Thesis (Ph. D.)--Ohio State University, 2006. / Title from first page of PDF file. Includes bibliographical references (p. 93).

No description available.

In 2009, based on its commitment to take action on the climate change, the aviation industry accorded a group of objectives to reduce carbon dioxide emissions. Although only 2% of all human-induced carbon dioxide (CO2) emissions are produced by the global aviation industry, the aviation industry is set to grow in the next 30 years. In order to maintain this growth without increasing its negative environmental impact, the future aircraft have to be cleaner and greener. In order to reduce carbon emissions and increase the operative efficiency, novel technologies have been developed and applied on aircraft. One of the recently introduced technologies is the flow control over the wing by employing active flow control methods. Amongst the active flow control methods, synthetic jets have emerged as a developing and promising technology. The latter have been extensively investigated since 1990 in laboratory based investigations. In spite of the fact that many experimental studies have been performed to design synthetic jet actuators for optimal flow control, due to the the vast number of operating parameters involved, and the lack of current measurement technologies, they can be impractical and highly expensive. Hence, there is a need for a systematic analysis to establish the optimal operating conditions with the highest effectiveness at the cost of minimum energy input, and the most suitable orientation of synthetic jet orifices. This would require enhanced comprehension of the inherent features of synthetic jets and their corresponding near wall effects. By using numerical simulations with a commercial CFD software (Star-CCM+), this thesis investigates some features associated with synthetic jet performance that are not fully understood, such as: • The optimal working configuration of a synthetic jet array embedded into a laminar detached boundary layer for flow separation control. • The effect of orifice orientation (inclined and skewed synthetic jets) over normal synthetic jets and their optimal working configuration in an attached laminar boundary layer.

<p> An implicit finite difference technique has been developed for the solution of the steady two dimensional boundary layer equations. </p> <p> The numerical method is free of stability limitations and similarity assumptions. Use has been made of Wu-type starting profiles which enable one to start the calculation from the leading edge. </p> <p> Attractive features of the technique are its simplicity, flexibility and applicability to a wide range of boundary layer problems. In addition, results obtained from several case studies indicate that the numerical procedure is both accurate and fast. </p> / Thesis / Master of Engineering (MEngr)

Boundary-layer flows near leading edges of generally curved obstacles have been studied for a long time. Apart from having many practical applications, the theory and approaches prevailing in this area stimulate development of a variety of computational tools and form a ground for testing them. The specific aim of this work is to study two-dimensional laminar boundary layer flows near the leading edges of airfoils and other elongated bodies, and to explore geometries for which boundary layer separation can be avoided. This class of problems is relevant to optimal design of wings, aircraft and projectile noses, laminar flow control methods and adaptive wing technology. One of the findings of this work suggests that local modifications to parabolic wing noses can yield up to 11% increase in the unseparated angle of attack. Another result obtained here is the set of shortest possible generalised elliptic noses of long symmetric bodies which allow unseparated flow. Methods adopted in this work are based on the combined use of numerically solved Prandtl equations written in Gortler variables, and inviscid solutions obtained semi-analytically by the conformal mapping method. The resulting technique being reliable, fast and computationally inexpensive, can complement or test the results obtained using a comprehensive CFD approach. / Thesis (Ph.D.)--School of Mathematical Sciences, 2002.

Boundary-layer flows near leading edges of generally curved obstacles have been studied for a long time. Apart from having many practical applications, the theory and approaches prevailing in this area stimulate development of a variety of computational tools and form a ground for testing them. The specific aim of this work is to study two-dimensional laminar boundary layer flows near the leading edges of airfoils and other elongated bodies, and to explore geometries for which boundary layer separation can be avoided. This class of problems is relevant to optimal design of wings, aircraft and projectile noses, laminar flow control methods and adaptive wing technology. One of the findings of this work suggests that local modifications to parabolic wing noses can yield up to 11% increase in the unseparated angle of attack. Another result obtained here is the set of shortest possible generalised elliptic noses of long symmetric bodies which allow unseparated flow. Methods adopted in this work are based on the combined use of numerically solved Prandtl equations written in Gortler variables, and inviscid solutions obtained semi-analytically by the conformal mapping method. The resulting technique being reliable, fast and computationally inexpensive, can complement or test the results obtained using a comprehensive CFD approach. / Thesis (Ph.D.)--School of Mathematical Sciences, 2002.

The stringing regulation on greenhouse gases emissions coupled with the rising fuel price and the growth in aviation transportation have imposed increasing demands on the aircraft industry to develop revolutionary technologies to meet such challenges. Methods of delaying flow separation on aircraft high lift systems have been sought which can lead to an increase in the aircraft performance and ultimately a reduction in aircraft operational costs and its impact on the environment. Synthetic jet actuators are a promising method of delivering flow control for aircraft applications due to their ability to inject momentum to an external flow without net mass flux and their potential in being integrated in MEMS through micro-fabrication with relative ease. It has been demonstrated in many laboratory experiments that synthetic jets are capable of delaying flow separation on aerodynamic bodies of various shapes. However, currently the operating conditions of synthetic jets are mostly chosen by trial-and-error, and thus the flow control effectiveness varies from one experiment to another. In order to deliver an effective flow separation control which achieves a desired control effect at minimum energy expenditure, a better understanding of the fluid mechanics of the behaviour of synthetic jets and the interaction between synthetic jets and a boundary layer are required. The aims of the present research were to achieve such a goal through a series of purposely designed numerical simulations. Firstly, synthetic jets issued from a circular orifice into quiescent air were studied to understand the effect of dimensionless parameters on the formation and the extent of roll-up of vortex rings. The computational results confirmed that the Stokes number determines the strength of vortex roll-up of a synthetic jet. Based on the computational results, a parameter map was produced in which three different operational regimes of synthetic jets were indentified and a criterion for vortex roll-up was also established. A circular synthetic jet issued into a zero-pressure-gradient laminar boundary layer was then investigated. The capability of FLUENT in modelling the key characteristics of synthetic jets was validated using experimental data. The formation and evolution of coherent structures produced by the interaction between synthetic jets and a boundary layer, as well as their near-wall effect in terms of the wall shear stress, were examined. A parameter map illustrating how the appearance of the vortical structures and their corresponding shear stress patterns vary as the synthetic jet operating condition changes was established. In addition, the increase in the wall shear stress relative to the jet-off case was calculated to evaluate their potential separation control effect.Finally, the study moved one step forward to investigate the flow separation control effect of an array of three circular synthetic jets issued into a laminar boundary layer which separates downstream on an inclined plate. The impact of synthetic jets on the boundary layer prior to separation and the extent of flow separation delay on the flap, at a range of synthetic jet operating conditions, were examined and the correlation between them was investigated. Furthermore, the optimal operating conditions for this synthetic jet array in the current study were identified by considering both the flow control effect and the actuator power consumption. The characteristics of the corresponding vortical structures were also examined.The findings from this work have produced some further insights of the behaviour and the interaction between synthetic jets and a boundary layer, which will be useful for ensuring an effective application of synthetic jets in practical settings.

No description available.