This thesis deals with the preparation and characterization of electrode materials for Li-ion batteries based on elemental sulfur. The theoretical part is focused on the characteristics of Li-ion batteries, electrochemical reactions, the process of electrochemical lithiation of sulfur and solubility properties of intermediate polysulfides. The practical part of the thesis deals with the preparation of cathode materials for Li-ion cells with an active substance in the form of elemental sulfur. The prepared electrodes were investigated using cyclic voltammetry and galvanostatic cycling. Physical characterization by SEM and XRD was provided.

This master´s thesis deals with stability of electrolytes and electrodes using electrochemical methods of Li-ion batteries. The first part of the project is devoted to the characteristics of Li-ion batteries, electrochemical reactions and characteristics of electrode materials. Consenquetial part is concentrated on preparation and measurement of elektrolyte EC : DMC with 1M LiPF6. The elektrolyte was investigated using galvanostatic method, cyclic voltammetry and impedance spectroscopy.

Mgr. Martina Nádherná PhD. Thesis Applications of ionic liquids in electrolytes for amperometric gas sensors and Li-ion batteries SUMMARY The dissertation presents the results of preparation and characterisation of new aprotic electrolytes based on ionic liquids for the solid-state electrochemical gas sensors and for the electrochemical energy storage devices - secondary lithium-ion batteries. In the part dealing with the solid-state amperometric sensor for NO2 research was aimed at development of new solid electrolyte. This electrolyte is developed as a system of ionic liquid embedded in the structure of a polymer, when the ionic liquid joints the properties of a solvent and a dissolved salt. The electrolyte therefore does not contain any volatile component and is long-term chemically and electrochemically stable. Several series of electrolytes were prepared with different polymers or macromonomers and imidazolium-based ionic liquids. The composition, especially the polymer-IL ratio was optimized. The electrolytes were successfully tested in a solid-state NO2 sensor with a gold minigrid serving as the indicating electrode. The research included the determination of basic electrochemical parameters and study of the sensor behaviour under different conditions. The influence of atmosphere humidity,...

This Master’s thesis deals with a monitoring of the temperature influence on Li-ion batteries, literature search of this topic and proposal of experiments. First chapter contains the theory of evolution and fundamentals of the Li-ion batteries. Planned experiments with flow charts and block diagrams are described in the second chapter. The work station is explained along with a description of the execution of the experiments in the third chapter. The experiments are analyzed and results explained in the last chapter.

This master´s thesis deals with electrodes for lithium-ions batteries based on LiCoO2. The first part of the project is devoted to the characteristics of Li-ion batteries, electrochemical reactions and characteristics of electrode materials. The next part describes an experiment that deals with the effects of NA doping on performance of layered materials for lithium secondary batteries. The materials were measured by cyclic voltammetry, impedance spectroscopy and galvanostatic cycling.

This diploma thesis deals with materials used by production ofcathodes of Lithium-ion batteries. Primary this thesis deals with LiCoO2material and its subsidizing of alkali metals. The first part deals with the charakteristic of Lithium-ion batteries, used materials, possibilities of doping and charging. The practical part concentrates on production of active substance of cathode and doping this substance by sodium and potassium. The methods of evaluation were used galvanostaticcycling and x-ray analysis (XRD).

This thesis is interested in new materials for lithium – ion batteries. Two different samples were investigated, one intercalation and one conversion cathode material. The theoretical part is focused to the structure of cells, their advantages and disadvantages compared to other secondary batteries. Also other materials used in batteries are described. The practical part describes the preparation of cathode materials for subsequent testing by scanning elektron microscopy and thermogravimetric analysis. In conclusions two different materials were evaluated and compared with each other.

This work deals with problems of lithium-ion batteries. In the theoretical part are described electrochemical sources in general and their division. The main representatives of individual types of electrochemical sources are described in more detail. In the next part the thesis focuses specifically on lithium-ion accumulators, their history, electrochemical reactions taking place inside and materials of individual parts of which the accumulator consists. Next part focuses on electron microscopy and its division into scanning and transmission. Basic parts and the principle of operation are described. The practical part is focused on creating a small cell for examination under an electron microscope.

This master's thesis deals with a topic of determination of the most suitable ratio of cathode materials for the lithium-sulfur systems. The first two chapters provide a general introduction to the topic of electrochemical energy sources and present the commonly used primary and secondary battery systems with emphasis on their characteristics and applications. The core of the theoretical part is dedicated to lithium-ion and lithium-sulfur batteries, their working principles along with the benefits or drawbacks related to the particular systems, and widely used materials. The experimental part briefly comments on determining the suitable electrode paste preparation method, the subsequent main part is focused on evaluation of electrochemical performance of cells using different ratios of cathode materials. Five samples of cathode materials were prepared, where the sulfur ratio is in range from 64 to 88 wt. %. Finally, the comparison of all prepared ratios in terms of their electrochemical properties is provided.

The diploma thesis deals with electrode materials for lithium-ions accumulators, concretely layered materials prepared via new methods. The main objective of this work is dealing with new procedures prepare electrodes of newly developed layered electrode materials and subsequently their measure. Another challenge was a theoretical analysis of newly developed layered electrode materials for positive and negative electrodes and their preparation of new procedures. In this work the detailed procedures for the preparation of individual electrodes, electrolytes and other issues associated with these preparations. There were describing batteries of general, primary and secondary lithium cells, fuel cells, Lithium-ion batteries, layered materials forming the electrodes and of course the history these cells. Practical work is focused on separate measurements layered electrode materials prepared by new processes and assessment of results for individual layered materials. In the practical part has been made that the newly prepared layered electrode materials offer higher capacity and voltage.