No description available.

Despite the crucial role they play in transferring loads from the superstructure to the foundation, steel column-to-footing connections have received little attention in research. Though shallow embedded connections are typically characterized as pinned, studies have shown that they exhibit significant rotational stiffness. The objective of this thesis is to quantify the rotational stiffness of such connections. A method named the continuum model is developed by which the rotational stiffness of embedded connections may be calculated. Outputs from this model are compared with experimental data on steel connections embedded in concrete. The continuum model is shown to be capable of reasonably predicting the rotational stiffness of such connections. Results from the model were consistent with those of previous experimental studies that showed that embedment lengths greater than twice the column depth fail to significantly increase stiffness. Plots of rotational stiffness vs. embedment length developed from the continuum model are provided such that rotational stiffness may be calculated for any wide flange shape at any embedment length. Simplified equations provide a simpler way for engineers to estimate the same information.

In this study, a typical mat foundation and structural loading pattern is considered. Three dimensional finite element analyses, PLAXIS 3D, is performed to determine the soil / foundation contact stress distribution, settlement distribution, distribution of modulus of subgrade reaction as a function of column spacing, stiffness of the soil and thickness of the foundation. A parametric study is performed to demonstrate the dependence of those distributions on various parameters. Moreover, a relationship between size of the foundation, deformation modulus of foundation soil and modulus of subgrade reaction is proposed. Depending on the variations in those parameters, obtained shear force and bending moment distributions are compared. Consistency between the resulting shear forces and bending moments of a typical foundation, modeled in two different three dimensional finite element programs, PLAXIS 3D and SAP 2000, is discussed. It is found that the variation in the aforementioned parameters cause different influences on contact stress distribution, settlement distribution, distribution of modulus of subgrade reaction. The importance of those variations in beforementioned parameters, under different situations is discussed. A relationship between modulus of subgrade reaction and deformation modulus of foundation soil is proposed.

Este trabalho parte de um acervo pré-existente de provas de carga em placa (segundo os procedimentos ABNT-NBR-6489 e ASTM-D-1196) em solos da Formação Guabirotuba, importante unidade geológica da região metropolitana de Curitiba. O objetivo do trabalho é favorecer o entendimento destes solos no que diz respeito à sua competência como subleito para pavimentos industriais rígidos. É realizada uma revisão sobre modelos de fundação de pavimento, aspectos geológicos e geotécnicos da Formação Guabirotuba, e métodos de determinação do coeficiente de recalque. A análise baseia-se no coeficiente de recalque \"k\" obtido em trinta e duas provas de carga em placa e utiliza uma classificação prática dos solos, quanto ao seu nível de intemperismo: argilas cinzas \"inalteradas\", argilas vermelhas \"laterizadas\" e argilas variegadas \"intemperizadas\", as quais mostram valores decrescentes de coeficiente de recalque, nessa ordem. Notou-se que algumas correlações existentes na literatura permitiram obter razoáveis previsões do coeficiente de recalque, como aquelas baseadas em valores de SPT e de CBR. Os valores de coeficiente de recalque medidos para estes solos mostram-se superiores àqueles sugeridos por tabelas práticas. Devido à variabilidade de resultados encontrada e à influência do subleito no desempenho final do sistema de fundação, fica evidenciada a importância da realização de provas de carga em placa para obtenção dos parâmetros de dimensionamento de pavimentos industriais rígidos. / The present work employs a data base of plate load tests (performed according the ABNT-NBR-6489 and ASTM-D-1196 procedures) in soils of the Guabirotuba Formation, important geological unit of Curitiba metropolitan region. The purpose of the work is the improving of the knowledge of these soils related to their behavior as subgrade for rigid industrial pavements. It is provided a revision about pavements foundation models, geological and geotechnical aspects of the Guabirotuba Formation and methods of the determination of the modulus of subgrade reaction. The analysis is based on the modulus of subgrade reaction \"k\" from 32 plate loading tests and uses a practical classification of the soils, according to their weathering level: intact gray clays, lateritic red clays and weathered variagate clays that showed a derease of the modulus in this order. Some correlations were found to predict fair values of \"k\", such as those based on SPT and on DCP. It was also noticed that the values of the modulus of subgrade reaction obtained are higher than the usual recommendations of the literature. The variability and the influence of the subgrade in the final performance of the pavaments make evident the importance of the plate load tests for obtaining reliable design parameters.

Este trabalho parte de um acervo pré-existente de provas de carga em placa (segundo os procedimentos ABNT-NBR-6489 e ASTM-D-1196) em solos da Formação Guabirotuba, importante unidade geológica da região metropolitana de Curitiba. O objetivo do trabalho é favorecer o entendimento destes solos no que diz respeito à sua competência como subleito para pavimentos industriais rígidos. É realizada uma revisão sobre modelos de fundação de pavimento, aspectos geológicos e geotécnicos da Formação Guabirotuba, e métodos de determinação do coeficiente de recalque. A análise baseia-se no coeficiente de recalque \"k\" obtido em trinta e duas provas de carga em placa e utiliza uma classificação prática dos solos, quanto ao seu nível de intemperismo: argilas cinzas \"inalteradas\", argilas vermelhas \"laterizadas\" e argilas variegadas \"intemperizadas\", as quais mostram valores decrescentes de coeficiente de recalque, nessa ordem. Notou-se que algumas correlações existentes na literatura permitiram obter razoáveis previsões do coeficiente de recalque, como aquelas baseadas em valores de SPT e de CBR. Os valores de coeficiente de recalque medidos para estes solos mostram-se superiores àqueles sugeridos por tabelas práticas. Devido à variabilidade de resultados encontrada e à influência do subleito no desempenho final do sistema de fundação, fica evidenciada a importância da realização de provas de carga em placa para obtenção dos parâmetros de dimensionamento de pavimentos industriais rígidos. / The present work employs a data base of plate load tests (performed according the ABNT-NBR-6489 and ASTM-D-1196 procedures) in soils of the Guabirotuba Formation, important geological unit of Curitiba metropolitan region. The purpose of the work is the improving of the knowledge of these soils related to their behavior as subgrade for rigid industrial pavements. It is provided a revision about pavements foundation models, geological and geotechnical aspects of the Guabirotuba Formation and methods of the determination of the modulus of subgrade reaction. The analysis is based on the modulus of subgrade reaction \"k\" from 32 plate loading tests and uses a practical classification of the soils, according to their weathering level: intact gray clays, lateritic red clays and weathered variagate clays that showed a derease of the modulus in this order. Some correlations were found to predict fair values of \"k\", such as those based on SPT and on DCP. It was also noticed that the values of the modulus of subgrade reaction obtained are higher than the usual recommendations of the literature. The variability and the influence of the subgrade in the final performance of the pavaments make evident the importance of the plate load tests for obtaining reliable design parameters.

No description available.

No description available.