This thesis deals with the study of the lifetime of charge carriers in perovskite single crystals. The principle of perovskite solar cells is formulated, their main structures are characterized and the history of the development of perovskite solar cells is summarized, especially in terms of efficiency. The properties of perovskite single crystals with perovskite solar cells are compared. For measurement purposes, transient methods, impedance spectroscopy, load characteristics and the dependence of sensitivity and photocurrent on the wavelength of incident radiation are described. The practical part deals with the method of measuring and evaluating the lifetime of charge carriers in the investigated perovskite single crystals.

Subject of the project is a concept of utilization of the basic quality devices during monitoring of critical parameters of silicon monocrystals’ production.

Title: Diffusion of native defects and impurities in CdTe/CdZnTe. Author: Lukáš Šedivý Author's e-mail address: luky.sedivy@seznam.cz Department: Institute of Physics of Charles University Supervisor: Doc. Ing. Eduard Belas, CSc. Supervisor's e-mail address: belas@karlov.mff.cuni.cz Abstract: In this thesis, the influence of structural defects on the electrical and de- tection characteristics of CdTe material was investigated. The performed research fo- cused on the reduction of structural defects in the material by annealing in Cd or Te vapor, while preserving acceptable features for X-ray and γ-ray detection. The mate- rial was characterized by measurement of the electrical resistivity and concentration and mobility of free carriers. Tellurium and cadmium inclusions were studied using infrared microscope. The static and dynamic properties of defect structures at high temperatures and de- fined Cd pressures was investigated, as well, and chemical diffusion coeficients describing the dynamic properties of these defects were experimentally determined. Keywords: monocrystal CdTe, structural defects in semiconductors, annealing in Cd or Te, chemical diffusion coefficient, γ-ray detectors. 1

This master´s project deals with design of an office building nearly zero energy standard. My master´s project consists of three parts. In the first one I work on technical design of the office building. It is a three-storey building with partial basement. Vertical load-bearing system is partially made from monolithic concrete walls and partially from clay blocks walls. The horizontal load-bearing structures are made of monolithic concrete slab. All roofs are designed as flat roofs. In second part I design all technical equipment in this building. In the last part I compare three types of roof, photovoltaic power plants and evaluate their environmental impact. First type of PV power plant is made by monocrystalline solar cell, second one by polycrystalline solar cell and last one by monocrystalline solar cell with battery system. Environmental impact of these systems is evaluated in Open LCA software. All structures comply with the valid standards and regulations.