The thesis deals with Uninterruptible Power Supply (UPS) and associated problems of backup power in case of unexpected outages of electricity. Start of work is dedicated to limitation of the electricity supplies, as well as their causes and consequences. Furthermore, brief history of UPS and subsequently distinguish between UPS’s architectures. There is also a description of the energy sources such as batteries, flywheels or fuel cells. Part of thesis describes security of electricity supply in health care facilities, including requirements for emergency power. The own design of UPS is described in the end.

The subject matter of the master´s thesis is, in particular, an evaluation of the advantageousness of the construction of a pumped-storage hydroelectric power station in the vicinity of Cukrová Bouda. In the master´s thesis introduction the utilisation of pumped-storage hydroelectric power stations in providing reserve power generation to the operator of a power transmission system is discussed. The thesis then focuses on a technical design solution where two alternatives are drawn up for which the nominal parameters of individual designs for a pumped-storage hydroelectric power station are specified. The following part deals with the impact of the structure and the plant’s subsequent operation on the environment. A further key part is the determination of investment and subsequent operating costs and an evaluation of the plant according to economic pointers. The final part of the master´s thesis contains a SWOT analysis and an assumed programme of works for the plant’s preparation and actual construction. The conclusion contains an overall evaluation.

The thesis deals with Uninterruptible Power Supply (UPS) and associated problems of backup power in case of unexpected outages of electricity. Start of work is dedicated to limitation of the electricity supplies, as well as their causes and consequences. Furthermore, brief history of UPS and subsequently distinguish between UPS’s architectures. There is also a description of the energy sources such as batteries, flywheels or fuel cells. Part of thesis describes security of electricity supply in health care facilities, including requirements for emergency power. The own design of UPS is described in the end.

This Graduation Theses dissertate about a creation of a drawing documentation at the professional CAE EPLAN Electric P8 system. One original solution of a remote control and of motor-generator monitoring with a mobile phone, short SMS-aided in this case, was used as an example of the drawing documentation. As has allready been noted in previous Bachelor Thesis, this application can be use not only for a remote control of a motor-generator, but this solution is suitable for other electric devices too, which are out of reach of an attendance for example. In our case a generator with 6kVA power is concerned with rated output voltage 230Vac and rated current 25A. The system of a remote control has the advantage that it is created from standard components (electric instruments, a PLC – programmable automat, a GSM modem, an operating panel and the respective program in the PLC).