1 |
Dependency-tracking object-oriented multidisciplinary design optimization (MDO) formulation on a large-scale systemAhlqvist, M. Alexandra 01 October 2001 (has links)
No description available.
|
2 |
A multidisciplinary algorithm for the 3-D design optimization of transonic axial compressor blades /Jones, James A. January 2002 (has links) (PDF)
Thesis (Ph. D. in Aeronautics and Astronautics)--Naval Postgraduate School, June 2002. / Dissertation supervisor: Raymond P. Shreeve. Includes bibliographical references (p. 157-161). Also available online.
|
3 |
Study on genetic algorithm improvement and applicationZhou, Yao. January 2006 (has links)
Thesis (M.S.)--Worcester Polytechnic Institute. / Keywords: tolerance assignment, genetic algorithms. Includes bibliographical references (p.59-65).
|
4 |
Layout optimization algorithms vor VLSI design and manufacturingXu, Gang, January 1900 (has links)
Thesis (Ph. D.)--University of Texas at Austin, 2007. / Vita. Includes bibliographical references.
|
5 |
Integrated structure/acutation synthesis for strain actuated devices /Forster, Edwin Ewald. January 2000 (has links)
Thesis (Ph. D.)--University of Washington, 2000. / Vita. Includes bibliographical references (leaves 96-100).
|
6 |
Optimization of waiting time at toll plazasBusam, Arvind Kumar 20 July 2005 (has links)
Toll plazas have several toll payment types such as manual, automatic coin machines, electronic and mixed lanes. In places with high traffic flow, the presence of toll plaza causes a lot of traffic congestion; this creates a bottleneck for the traffic flow, unless the correct mix of payment types is in operation. The objective of this research is to determine the optimal lane configuration for the mix of the methods of payment so that the waiting time in the queue at the toll plaza is minimized. A queuing model representing the toll plaza system and a nonlinear integer program have been developed to determine the optimal mix. The numerical results show that the waiting time can be decreased at the toll plaza by changing the lane configuration. For the case study developed an improvement in the waiting time as high as 96.37 percent was noticed during the morning peak hour.
|
7 |
Dynamic Model Creation and Scripting Support in the Horizon Simulation FrameworkButler, Brian Jeffrey 01 February 2012 (has links)
Dynamic model creation and support for the Lua scripting language was added to the Horizon Simulation Framework used for the verification and validation of system-level requirements. The addition of scripting support allows for subsystem models and their algorithms to be defined using a simpler scripting language, rather than C++. The Luabind library by Rasterbind software is used to expose the C++ algorithms and classes to Lua that are already defined in the framework. Interoperability between Lua and C++ code allows for the ease of use of a scripting language while utilizing the utility classes and functions already created. The dynamic model creation algorithm developed allows for the structure and logic of the simulated system to be defined completely using XML and text files as input to the framework. Dynamic model creation prevents the need to re-compile the framework every time small changes are made and greatly simplifies the changes required to simulate a different model. A runtime analysis shows that using a scripting language does not decrease the performance significantly, while increasing usability and decreasing the time required to set up simulations. Tests where the scripted code uses only classes and function exposed by luabind show that there is virtually no performance decrease when compared to the same algorithms in C++. Performance decreases as more of the algorithm implemented is executed in Lua. An example test scenario that represents the typical use of the framework showed only a minor decrease in performance. The multi-threaded scheduler developed works with the scripting support and allows for modern multi-core or multi-processor computers to be used most efficiently for simulations. This thesis describes the algorithms of dynamic model creation and scripting support, as well as the methodology used to expose C++ code to Lua. This thesis also presents the architecture changes required to support dynamic model creation, scripting support, and multi-threaded scheduling. Finally, runtime results of the added scripting support are presented.
|
8 |
A differential geometry framework for multidisciplinary design optimizationBakker, Craig Kent Reddick January 2015 (has links)
No description available.
|
9 |
Applying Human Factors Principles In Aviation Displays: A Transition From Analog to Digital Cockpit Displays In The CP140 Aurora AircraftPalmer, Ryan C. 01 August 2007 (has links)
A flight test program that evaluated the results of a CP140 Aurora cockpit modernization project was conducted between May 2004 and October 2005. This paper uses the results of that test program to show how basic human factors principles were violated which led to the identification of multiple design deficiencies. This paper proposes that the failure to apply good human factors principles when designing aircraft displays can lead to unacceptable deficiencies. The result can be poor modal awareness, confusion in the cockpit, and often negative training for the pilots. In particular, four major deficiencies were analyzed to determine the specific human factors principles that were breached. The violations included a lack of concise and relevant feedback to the pilot, unclear and ambiguous annunciations, poor use of colour coding principles and logic, a lack of suitable attention capture cueing, inappropriate alert cueing, an absence of aural cueing during specific degraded modes of operation, excessive cognitive workload, and a failure to incorporate the pilot as the focal point of the display design, also known as a human centred design philosophy. Recommendations for system design enhancements are provided to ensure safe and effective operations of this prototype system prior to operational implementation.
The evaluation of the prototype system design was conducted by a flight test team from the Aerospace Engineering Test Establishment in Cold Lake, Alberta and supported by the Maritime Proving and Evaluation Unit in Greenwood, Nova Scotia. The test program encompassed a thorough review of system design documentation, abinitio training and preliminary testing in a Systems Integration Lab and 40 flight test missions. The recorded deficiencies were based upon the observations of two Qualified Test Pilots.
|
10 |
Evaluating the design process of a four-bar-slider mechanism using uncertainty techniquesBartlett, Elizabeth Kay. January 2002 (has links)
Thesis (M.S.)--Mississippi State University. Department of Mechanical Engineering. / Title from title screen. Includes bibliographical references.
|
Page generated in 0.0914 seconds