As the wireless communication technologies evolve and the demand of wireless services increases, spectrum scarcity becomes a bottleneck that limits the introduction of new technologies and services. Spectrum sharing between primary and secondary users has been brought up to improve spectrum efficiency. In underlay spectrum sharing, the secondary user transmits simultaneously with the primary user, under the constraint that the interference induced at the primary receiver is below a certain threshold, or a certain primary rate requirement has to be satisfied. Specifically, in this thesis, the coexistence of a multiple-input single-output (MISO) primary link and a MISO/multiple-input multiple-output (MIMO) secondary link is studied. The primary transmitter employs maximum ratio transmission (MRT), and single-user decoding is deployed at the primary receiver. Three scenarios are investigated, in terms of the interference from the primary transmitter to the secondary receiver, namely, weak interference, strong interference and very strong interference, or equivalently three ranges of primary rate requirement. Rate splitting and successive decoding are deployed at the secondary transmitter and receiver, respectively, when it is feasible, and otherwise single-user decoding is deployed at the secondary receiver. For each scenario, optimal beamforming/precoding and power allocation at the secondary transmitter is derived, to maximize the achievable secondary rate while satisfying the primary rate requirement and the secondary power constraint. Numerical results show that rate splitting at the secondary transmitter and successive decoding at the secondary receiver does significantly increase the achievable secondary rate if feasible, compared with single-user decoding at the secondary receiver. In overlay spectrum sharing, different from underlay spectrum sharing, the secondary transmitter can utilize the knowledge of the primary message, which is acquired non-causally (i.e., known in advance before transmission) or causally (i.e., acquired in the first phase of a two-phase transmission), to help transmit the primary message besides its own message. Specifically, the coexistence of a MISO primary link and a MISO/MIMO secondary link is studied. When the secondary transmitter has non-causal knowledge of the primary message, dirty-paper coding (DPC) can be deployed at the secondary transmitter to precancel the interference (when decoding the secondary message at the secondary receiver), due to the transmission of the primary message from both transmitters. Alternatively, due to the high implementation complexity of DPC, linear precoding can be deployed at the secondary transmitter. In both cases, the primary transmitter employs MRT, and single-user decoding is deployed at the primary receiver; optimal beamforming/precoding and power allocation at the secondary transmitter is obtained, to maximize the achievable secondary rate while satisfying the primary rate requirement and the secondary power constraint. Numerical results show that with non-causal knowledge of the primary message and the deployment of DPC at the secondary transmitter, overlay spectrum sharing can achieve a significantly higher secondary rate than underlay spectrum sharing, while rate loss occurs with the deployment of linear precoding instead of DPC at the secondary transmitter. When the secondary transmitter does not have non-causal knowledge of the primary message, and still wants to help with the primary transmission in return for the access to the spectrum, it can relay the primary message in an amplify-and-forward (AF) or a decode-and-forward (DF) way in a two-phase transmission, while transmitting its own message. The primary link adapts its transmission strategy and cooperates with the secondary link to fulfill its rate requirement. To maximize the achievable secondary rate while satisfying the primary rate requirement and the primary and secondary power constraints, in the case of AF cooperative spectrum sharing, optimal relaying matrix and beamforming vector at the secondary transmitter is obtained; in the case of DF cooperative spectrum sharing, a set of parameters are optimized, including time duration of the two phases, primary transmission strategies in the two phases and secondary transmission strategy in the second phase. Numerical results show that with the cooperation from the secondary link, the primary link can avoid outage effectively, especially when the number of antennas at the secondary transceiver is large, while the secondary link can achieve a significant rate. Power is another precious resource besides spectrum. Instead of spectrum efficiency, energy-efficient spectrum sharing focuses on the energy efficiency (EE) optimization of the secondary transmission. The EE of the secondary transmission is defined as the ratio of the achievable secondary rate and the secondary power consumption, which includes both the transmit power and the circuit power at the secondary transmitter. For simplicity, the circuit power is modeled as a constant. Specifically, the EE of a MIMO secondary link in underlay spectrum sharing is studied. Three transmission strategies are introduced based on the primary rate requirement and the channel conditions. Rate splitting and successive decoding are deployed at the secondary transmitter and receiver, respectively, when it is feasible, and otherwise single-user decoding is deployed at the secondary receiver. For each case, optimal transmit covariance matrices at the secondary transmitter are obtained, to maximize the EE of the secondary transmission while satisfying the primary rate requirement and the secondary power constraint. Based on this, an energy-efficient resource allocation algorithm is proposed. Numerical results show that MIMO underlay spectrum sharing with EE optimization can achieve a significantly higher EE compared with MIMO underlay spectrum sharing with rate optimization, at certain SNRs and with certain circuit power, at the cost of the achievable secondary rate, while saving the transmit power. With rate splitting at the secondary transmitter and successive decoding at the secondary receiver if feasible, a significantly higher EE can be achieved compared with the case when only single-user decoding is deployed at the secondary receiver. Moreover, the EE of a MIMO secondary link in overlay spectrum sharing is studied, where the secondary transmitter has non-causal knowledge of the primary message and employs DPC to obtain an interference-free secondary link. Energy-efficient precoding and power allocation is obtained to maximize the EE of the secondary transmission while satisfying the primary rate requirement and the secondary power constraint. Numerical results show that MIMO overlay spectrum sharing with EE optimization can achieve a significantly higher EE compared with MIMO overlay spectrum sharing with rate optimization, at certain SNRs and with certain circuit power, at the cost of the achievable secondary rate, while saving the transmit power. MIMO overlay spectrum sharing with EE optimization can achieve a higher EE compared with MIMO underlay spectrum sharing with EE optimization. / Aufgrund der rasanten Entwicklung im Bereich der drahtlosen Kommunikation und der ständig steigenden Nachfrage nach mobilen Anwendungen ist die Knappheit von Frequenzbändern ein entscheidender Engpass, der die Einführung neuer Funktechnologien behindert. Die gemeinsame Benutzung von Frequenzen (Spektrum-Sharing) durch primäre und sekundäre Nutzer ist eine Möglichkeit, die Effizienz bei der Verwendung des Spektrums zu verbessern. Bei der Methode des Underlay-Spektrum-Sharing sendet der sekundäre Nutzer zeitgleich mit dem primären Nutzer unter der Einschränkung, dass für den primären Nutzer die erzeugte Interferenz unterhalb eines Schwellwertes liegt oder gewisse Anforderungen an die Datenrate erfüllt werden. In diesem Zusammenhang wird in der Arbeit insbesondere die Koexistenz von Mehrantennensystemen untersucht. Dabei wird für die primäre Funkverbindung der Fall mit mehreren Sendeantennen und einer Empfangsantenne (MISO) angenommen. Für die sekundäre Funkverbindung werden mehrere Sendeantennen und sowohl eine als auch mehrere Empfangsantennen (MISO/MIMO) betrachtet. Der primäre Sender verwendet Maximum-Ratio-Transmission (MRT) und der primäre Empfänger Einzelnutzerdecodierung. Für den sekundären Nutzer werden außerdem am Sender eine Datenratenaufteilung (rate splitting) und am Empfänger entweder eine sukzessive Decodierung – sofern sinnvoll – oder andernfalls eine Einzelnutzerdecodierung verwendet. Im Unterschied zur Methode des Underlay-Spektrum-Sharing kann der sekundäre Nutzer beim Verfahren des Overlay-Spektrum-Sharing die Kenntnis über die Nachrichten des primären Nutzers einsetzen, um die Übertragung sowohl der eigenen als auch der primären Nachrichten zu unterstützen. Das Wissen über die Nachrichten erhält er entweder nicht-kausal, d.h. vor der Übertragung, oder kausal, d.h. während der ersten Phase einer zweistufigen Übertragung. In der Arbeit wird speziell die Koexistenz von primären MISO-Funkverbindungen und sekundären MISO/MIMO-Funkverbindungen untersucht. Bei nicht-kausaler Kenntnis über die primären Nachrichten kann der sekundäre Sender beispielsweise das Verfahren der Dirty-Paper-Codierung (DPC) verwenden, welches es ermöglicht, die Interferenz durch die primären Nachrichten bei der Decodierung der sekundären Nachrichten am sekundären Empfänger aufzuheben. Da die Implementierung der DPC mit einer hohen Komplexität verbunden ist, kommt als Alternative auch eine lineare Vorcodierung zum Einsatz. In beiden Fällen verwendet der primäre Transmitter MRT und der primäre Empfänger Einzelnutzerdecodierung. Besitzt der sekundäre Nutzer keine nicht-kausale Kenntnis über die primären Nachrichten, so kann er als Gegenleistung für die Mitbenutzung des Spektrums dennoch die Übertragung der primären Nachrichten unterstützen. Hierfür leitet er die primären Nachrichten mit Hilfe der Amplify-And-Forward-Methode oder der Decode-And-Forward-Methode in einer zweitstufigen Übertragung weiter, währenddessen er seine eigenen Nachrichten sendet. Der primäre Nutzer passt seine Sendestrategie entsprechend an und kooperiert mit dem sekundären Nutzer, um die Anforderungen an die Datenrate zu erfüllen. Nicht nur das Spektrum sondern auch die Sendeleistung ist eine wichtige Ressource. Daher wird zusätzlich zur Effizienz bei der Verwendung des Spektrums auch die Energieeffizienz (EE) einer sekundären MIMO-Funkverbindung für das Underlay-Spektrum-Sharing-Verfahren analysiert. Wie zuvor wird für den sekundären Nutzer am Sender eine Datenratenaufteilung (rate splitting) und am Empfänger entweder eine sukzessive Decodierung oder eine Einzelnutzerdecodierung betrachtet. Weiterhin wird die EE einer sekundären MIMO-Funkverbindung für das Overlay-Spektrum-Sharing-Verfahren untersucht. Dabei nutzt der sekundäre Nutzer die nicht-kausale Kenntnis über die primären Nachrichten aus, um mittels DPC eine interferenzfreie sekundäre Funkverbindung zu erhalten.

[pt] Sistemas multi-input multi-output (MIMO) massivos livres de células são uma variante de sistemas MIMO multi-celulares que consideram a ausência de células. Desta forma, a interferência entre as células é minimizada e a capacidade de cobertura do sistema é melhorada devido à menor distância entre os pontos de acesso (APs) e os usuários. É uma solução de comunicação MIMO massiva multi-usuário que envolve um número estendido de APs que podem ser equipados com tecnologia MIMO para fornecer serviço a usuários simultaneamente. Os APs são controlados por uma unidade central de processamento (CPU) para garantir a coordenação dentro da rede e para processamento e decodificação de informação. Possíveis arranjos para a arquitetura livre de células incluem esquemas centralizados e descentralizados. Para a configuração centralizada, os APs enviam todas as suas estimativas de canal e informações recebidas para a CPU por meio de enlaces de transporte frontais para processamento e detecção de sinais. Além disso, na arquitetura centralizada, os APs atuam como repetidores na rede. Outro nível de cooperação para sistemas MIMO massivos livre de células é o esquema descentralizado. Nesta proposta de tese, a arquitetura dos sistema MIMO massivos livres de células no canal reverso é estudada para as implementações centralizadas e descentralizadas. Em particular, estuda-se o desempenho de técnicas de mitigação de interferência para essas redes supondo-se conhecimento perfeito de canal e usando técnicas de detecção lineares e não lineares, seleção de APs, e esquemas iterativos de detecção e decodificação com códigos LDPC para melhorar o desempenho do sistema e reduzir a carga de sinalização. Para o caso em que há falta de compartilhamento de informações sobre os canais, o uso de pilotos para obter estimativas de canais é considerado e explorado. / [en] Cell-free massive multiple-input multiple-output (CF-mMIMO) is an advanced variant of network multiple-input multiple-output (MIMO) which considers absence of cell boundaries. Thus, the interference between cells in cellular systems is greatly minimised and the system s coverage capacity is improved due to the shorter distances between the access points (APs) and the users. It is a multi-user massive MIMO communications solution that involves an extended number of APs that can either be equipped with MIMO or single antennas to provide service to users simultaneously. The APs are controlled by a central processing unit (CPU) to ensure coordination within the network and for information processing and decoding. Possible arrangements for the CF-mMIMO architecture include, but are not limited to: centralized and decentralized schemes. In this thesis, the uplink of a CF-mMIMO system architecture is studied for the centralized and decentralized implementations. In particular, we study the performance of interference mitigation techniques for CF-mMIMO networks using iterative detection and decoding (IDD) schemes. The performance of the system is studied assuming perfect and imperfect channel state information (CSI). Access point selection based on the effective channel gain to make the network more practical and scalable are devised. The use of low-density parity check (LDPC) codes that adopt message passing has been investigated. Furthermore, log likelihood ratio (LLR) refinement strategies have been proposed to improve decentralized processing for CF-mMIMO networks. Finally, the performance of the considered schemes is analyzed theoretically and simulations are used to assess the performance in terms of BER, number of fronthaul signaling, and computational cost.

Les principaux objectifs des opérateurs ferroviaires visent à accroître la sécurité, réduire les coûts d’exploitation et de maintenance et augmenter l’attractivité et les bénéfices du transport ferroviaire en offrant de nouveaux services aux passagers. Ceci ne pourra être atteint que grâce à la multiplication des échanges de données entre les différents acteurs du monde ferroviaire. L’interopérabilité, l’efficacité spectrale, l’optimisation de l’usage des ressources radio et l’amélioration de la fiabilité des communications sont des exigences fortes pour les applications de télécommunication ferroviaires. Les recherches dans le domaine de la radio cognitive ont vu le jour afin de répondre aux besoins de communication de l’armée ainsi qu’aux besoins dans les secteurs de la sécurité publique. Ces domaines partagent souvent les mêmes exigences que les chemins de fers. Ainsi, la radio cognitive a montré un potentiel prometteur pour répondre aux besoins listés précédemment. Une des principales fonctionnalités d’un dispositif de radio cognitive est de prendre conscience de son environnement radioélectrique et de détecter les bandes disponibles. Trois principaux éléments définissent l’environnement de la radio cognitive : l’utilisateur, les règles d’accès au spectre radio et les domaines radio. Cette thèse met en avant plusieurs contributions relatives à la reconnaissance de l’environnement radiofréquence et la détection de bandes libres. Plus spécifiquement, ces contributions portent sur la reconnaissance par la radio cognitive de l’occupation du spectre et de la modulation des signaux présents dans les bandes analysées. Ces fonctions ont été conçues pour le contexte ferroviaire, c’est-à-dire la grande vitesse et un environnement électromagnétique difficile en présence de bruit impulsif. / An essential goal of railway operators is to increase safety, reduce operation and maintenance costs, and increase attraction and profit by offering new services to passengers. These objectives will be reached thanks to a huge increase of data fluxes exchanges between railways stakeholders and infrastructures.Interoperability, spectral efficiency, optimization of radio resource usages, and improvement of communications reliability are of significant interest for railway applications. The Cognitive Radio (CR) research has been successfully applied to meet the communication needs of the military as well as the public-safety sectors, which share many of the same needs as railway. CRs have shown significant promise to answer all of the previously listed requirements. One of the main capabilities of a CR device is to sense and finally become aware of its environment. Three major domains define the environment of the CR, namely, the user, policy, and radio domains. This thesis highlights several contributions to radio environment awareness of a CR device. More specifically, these contributions lie in the spectrum awareness and waveform awareness functions of the CR. We designed these functions for the railways context, that is, a high speed vehicular context, besides difficult electromagnetic environments resulting a heavy-tailed impulsive noise.

Today, owners of small communicating device are interested in transmitting or receiving various multimedia data. By increasing the number of antennas at the transmitter and/or the receiver side of the wireless link, the diversity/Multiple-Input Multiple-Output (MIMO) techniques can increase wireless channel capacity without the need for additional power or spectrum in rich scattering environments. However, due to the limited space of small mobile devices, the correlation coefficients between MIMO antenna elements are very high and the total efficiencies of MIMO elements degrade severely. Furthermore, the human body causes high losses on electromagnetic wave. During the applications, the presence of users may result in the significant reduction of the antenna total efficiencies and highly affects the correlations of MIMO antenna systems. The aims of this thesis are to investigate and enhance the MIMO/diversity performance of multiple antenna systems in the free space and the presence of users. The background and theory of multiple antenna systems are introduced briefly first. Several figures of merits are provided and discussed to evaluate the multiple antenna systems. The decoupling techniques are investigated in the multiple antenna systems operating at the higher frequencies (above 1.7 GHz) and with high radiation efficiency. The single, dual and wide band isolation enhancements are realized through the half-wavelength decoupling slot, quarter-wavelength decoupling slot with T-shaped impedance transformer, tree-like parasitic element with multiple resonances, as well as the different polarizations and radiation patterns of multiple antennas. In the lower bands (lower than 960 MHz), due to the low radiation efficiency and strong chassis mode, the work mainly focused on how to directly reduce the correlations and enlarge the total efficiency. A new mode of mutual scattering mode is introduced. By increasing the Q factors, the radiation patterns of multiple antennas are separated automatically to reduce the correlations. With the inter-element distance larger than a certain distance, a higher Q factor also improved the total efficiency apart from the low correlation. A wideband LTE MIMO antenna with multiple resonances is proposed in mobile terminals. The high Q factors required for the low correlation and high efficiencies in mutual scattering mode is reduced with another mode of diagonal antenna-chassis mode. Hence, the bandwidth of wideband LTE MIMO antenna with multiple resonances mentioned above can be further enlarged while maintaining the good MIMO/diversity performance. The user effects are studied in different MIMO antenna types, chassis lengths, frequencies, port phases and operating modes. Utilizing these usefully information, an adaptive quad-element MAS has been proposed to reduce the user effects and the some geranial rules not limited to the designed MAS have also been given. / <p>QC 20130121</p> / EU Erasmus Mundus External Cooperation Window TANDEM

Τα τελευταία χρόνια χαρακτηρίζονται από μια αλματώδη ανάπτυξη των προϊόντων και υπηρεσιών που βασίζονται στα δίκτυα ασύρματης επικοινωνίας, ενώ προκύπτουν σημαντικές ερευνητικές προκλήσεις. Τα συστήματα πολλαπλών κεραιών στον πομπό και στο δέκτη, γνωστά και ως συστήματα MIMO (multi-input multi-output), καθώς και η τεχνολογία πολλαπλής προσπέλασης με χρήση κωδικών (code division multiple access, CDMA) αποτελούν δύο από τα βασικά μέτωπα ανάπτυξης των ασύρματων τηλεπικοινωνιών. Στα πλαίσια της παρούσας διδακτορικής διατριβής, ασχοληθήκαμε με την ανάπτυξη και μελέτη αλγορίθμων επεξεργασίας σήματος για τα δύο παραπάνω συστήματα, όπως περιγράφεται αναλυτικά παρακάτω. Σχετικά με τα συστήματα MIMO, η πρωτοποριακή έρευνα που πραγματοποιήθηκε στα Bell Labs γύρω στα 1996, όπου αναπτύχθηκε η αρχιτεκτονική BLAST (Bell Labs Layered Space-Time), απέδειξε ότι η χρήση πολλαπλών κεραιών μπορεί να οδηγήσει σε σημαντική αύξηση της χωρητικότητας των ασύρματων συστημάτων. Προκειμένου να αξιοποιηθούν οι παραπάνω δυνατότητες, απαιτείται η σχεδίαση σύνθετων δεκτών MIMO. Προς αυτήν την κατεύθυνση, έχει προταθεί ένας μεγάλος αριθμός μεθόδων ισοστάθμισης του καναλιού. Ωστόσο, οι περισσότερες από αυτές υποθέτουν ότι το ασύρματο κανάλι είναι: 1) χρονικά σταθερό, 2) συχνοτικά επίπεδο (δεν εισάγει διασυμβολική παρεμβολή), και κυρίως 3) ότι είναι γνωστό στο δέκτη. Δεδομένου ότι σε ευρυζωνικά συστήματα μονής φέρουσας οι παραπάνω υποθέσεις είναι δύσκολο να ικανοποιηθούν, στραφήκαμε προς τις προσαρμοστικές μεθόδους ισοστάθμισης. Συγκεκριμένα, αναπτύξαμε τρεις βασικούς αλγορίθμους. Ο πρώτος αλγόριθμος αποτελεί έναν προσαρμοστικό ισοσταθμιστή ανάδρασης αποφάσεων (decision feedback equalizer, DFE) για συχνοτικά επίπεδα κανάλια ΜΙΜΟ. Ο προτεινόμενος MIMO DFE ακολουθεί την αρχιτεκτονική BLAST, και ανανεώνεται με βάση τον αλγόριθμο αναδρομικών ελαχίστων τετραγώνων (RLS) τετραγωνικής ρίζας. Ο ισοσταθμιστής μπορεί να παρακολουθήσει ένα χρονικά μεταβαλλόμενο κανάλι, και, από όσο γνωρίζουμε, έχει τη χαμηλότερη πολυπλοκότητα από όλους τους δέκτες BLAST που έχουν προταθεί έως σήμερα. Ο δεύτερος αλγόριθμος αποτελεί την επέκταση του προηγούμενου σε συχνοτικά επιλεκτικά κανάλια. Μέσω κατάλληλης μοντελοποίησης του προβλήματος ισοστάθμισης, οδηγηθήκαμε σε έναν αποδοτικό DFE για ευρυζωνικά κανάλια MIMO. Τότε, η διαδικασία της ισοστάθμισης εμφανίζει προβλήματα αριθμητικής ευστάθειας, που λόγω της υλοποίησης RLS τετραγωνικής ρίζας αντιμετωπίστηκαν επιτυχώς. Κινούμενοι προς την κατεύθυνση περαιτέρω μείωσης της πολυπλοκότητας, προτείναμε έναν προσαρμοστικό MIMO DFE που ανανεώνεται με βάση τον αλγόριθμο ελαχίστων μέσων τετραγώνων (LMS) υλοποιημένο εξ ολοκλήρου στο πεδίο της συχνότητας. Με χρήση του ταχύ μετασχηματισμού Fourier (FFT), μειώνεται η απαιτούμενη πολυπλοκότητα. Παράλληλα, η μετάβαση στο πεδίο των συχνοτήτων έχει ως αποτέλεσμα την προσεγγιστική διαγωνοποίηση του συστήματος, προσφέροντας ανεξάρτητη ανανέωση των φίλτρων ανά συχνοτική συνιστώσα και επιτάχυνση της σύγκλισης του αλγορίθμου. Ο προτεινόμενος ισοσταθμιστής πετυχαίνει μια καλή ανταλλαγή μεταξύ απόδοσης και πολυπλοκότητας. Παράλληλα με τα παραπάνω, ασχοληθήκαμε με την εκτίμηση του ασύρματου καναλιού σε ένα ασύγχρονο σύστημα CDMA. Το βασικό σενάριο είναι ότι ο σταθμός βάσης γνωρίζει ήδη τους ενεργούς χρήστες, και καλείται να εκτιμήσει τις παραμέτρους του καναλιού ανερχόμενης ζεύξης ενός νέου χρήστη που εισέρχεται στο σύστημα. Το πρόβλημα περιγράφεται από μια συνάρτηση ελαχίστων τετραγώνων, η οποία είναι γραμμική ως προς τα κέρδη του καναλιού, και μη γραμμική ως προς τις καθυστερήσεις του. Αποδείξαμε ότι το πρόβλημα έχει μια προσεγγιστικά διαχωρίσιμη μορφή, και προτείναμε μια επαναληπτική μέθοδο υπολογισμού των παραμέτρων. Ο προτεινόμενος αλγόριθμος δεν απαιτεί κάποια ειδική ακολουθία διάχυσης και λειτουργεί αποδοτικά ακόμη και για περιορισμένη ακολουθία εκπαίδευσης. Είναι εύρωστος στην παρεμβολή πολλαπλών χρηστών και περισσότερο ακριβής από μια υπάρχουσα μέθοδο εις βάρος μιας ασήμαντης αύξησης στην υπολογιστική πολυπλοκότητα. / Over the last decades, a dramatic progress in the products and services based on wireless communication networks has been observed, while, at the same time, new research challenges arise. The systems employing multiple antennas at the transmitter and the receiver, known as MIMO (multi-input multi-output) systems, as well as code division multiple access (CDMA) systems, are two of the main technologies employed for the evolution of wireless communications. During this PhD thesis, we worked on the design and analysis of signal processing algorithms for the two above systems, as it is described in detail next. Concerning the MIMO systems, the pioneering work performed at Bell Labs around 1996, where the BLAST (Bell Labs Layered Space-Time) architecture has been developed, proved that by using multiple antennas can lead to a significant increase in wireless systems capacity. To exploit this potential, sophisticated MIMO receivers should be designed. To this end, a large amount of channel equalizers has been proposed. However, most of these methods assume that the wireless channel is: 1) static, 2) frequency flat (no intersymbol interference is introduced), and mainly 3) it is perfectly known at the receiver. Provided that in high rate single carrier systems these assumptions are difficult to be met, we focused our attention on adaptive equalization methods. More specifically, three basic algorithms have been developed. The first algorithm is an adaptive decision feedback equalizer (DFE) for frequency flat MIMO channels. The proposed MIMO DFE implements the BLAST architecture, and it is updated by the recursive least squares (RLS) algorithm in its square root form. The new equalizer can track time varying channels, and, to the best of our knowledge, it has the lowest computational complexity among the BLAST receivers that have been proposed up to now. The second algorithm is an extension of the previous one to the frequency selective channel case. By proper modeling of the equalization problem, we arrived at an efficient DFE for wideband MIMO channels. In this case, the equalization process encounters numerical instability problems, which were successfully treated by the square root RLS implementation employed. To further reduce complexity, we proposed an adaptive MIMO DFE that is updated by the least mean square (LMS) algorithm, fully implemented in the frequency domain. By using the fast Fourier transform (FFT), the complexity required is considerably reduced. Moreover, the frequency domain implementation leads to an approximate decoupling of the equalization problem at each frequency bin. Thus, an independent update of the filters at each frequency bin allows for a faster convergence of the algorithm. The proposed equalizer offers a good performance - complexity tradeoff. Furthermore, we worked on channel estimation for an asynchronous CDMA system. The assumed scenario is that the base station has already acquired all the active users, while the uplink channel parameters of a new user entering the system should be estimated. The problem can be described via a least squares cost function, which is linear with respect to the channel gains, and non linear to its delays. We proved that the problem is approximately decoupled, and a new iterative parameter estimation method has been proposed. The suggested method does not require any specific pilot sequence and performs well even for a short training interval. It is robust to multiple access interference and more accurate compared to an existing method, at the expense of an insignificant increase in computational complexity.