The theoretical part deals with basic characteristics of low-temperature, low-pressure plasma. It also describes the principles of preparation of polymer and nanocomposite films using this type of plasma. It further explains the basic principles of methods used to characterize our samples. The experimental section shows a technology to produce hard polymeric coatings with metal (Cu) nanoparticles (NPs) fabricated by gas aggregation source (GAS). This approach has an important advantage that Cu concentration and matrix properties can be controlled independently. Characterization of the films in terms of chemical composition, morphology, optical and mechanical properties is described here alongside with description of Cu NPs production using GAS with variable aggregation length. The a- C:H matrix was deposited in a mixture of Ar and n-hexane on the substrates placed on a RF electrode. The beam of the NPs was normal to the substrate plane. In this arrangement it was possible to control hardness of the films and by operational parameters of the GAS also the amount of the NPs in the film. In the last section fabrication of nanocomposite films of titanium and nylon NPs is shown. Powered by TCPDF (www.tcpdf.org)