Les vibrations qui sont en général source de dérangement, d’usure et même destruction des machines et structures mécaniques doivent être contrôlées ou éliminées. Pour cette raison, la lutte contre les vibrations est devenue depuis des années un enjeu majeur pour les chercheurs de laboratoire et de développement dans l’industrie afin de développer des solutions efficaces contre ces problèmes. De nombreuses technologies ont donc été développées. Parmi ces technologies, les absorbeurs de vibration non linéaires présentent des performances importantes dans l’atténuation de vibration sur une large bande de fréquences. C’est dans ce contexte que cette thèse se focalise sur l’analyse et l’optimisation des absorbeurs de vibration non linéaires. L’objectif de cette thèse est d’analyser le comportement dynamique non linéaire des systèmes présentant des absorbeurs de vibration non linéaires. Pour cela, un modèle dynamique d’un système à deux degrés de liberté est développé mettant en équations le comportement non linéaire. La résolution des équations de mouvement est faite par la Méthode Asymptotique Numérique (MAN). La performance de cette méthode est montrée via une comparaison avec la méthode de Newton-Raphson. L’analyse des modes non linéaires du système ayant une non-linéarité cubique est faite par une formulation explicite des Fonctions de Réponse en Fréquence non linéaires (FRFs) et les Modes Normaux Non linéaires (MNNs). Un démonstrateur sur la base d’un système simple à deux degré de liberté est mis en place afin de recaler les modèles envisagés sur la base des résultats expérimentaux trouvés. / Vibrations are usually undesired phenomena as they may cause discomfort, disturbance, damage, and sometimes destruction of machines and structures. It must be reduced or controlled or eliminated. For this reason, the vibrations attenuation became a major issue for scientists and researchers in order to develop effective solutions for these problems. Many technologies have been developed. Among these technologies, the nonlinear vibration absorbers have significant performance in the vibration attenuation over a wide frequency band. In this context, this thesis focuses on the analysis and optimization of nonlinear vibration absorbers. The objective of the thesis is to analyze the nonlinear dynamic behavior of systems with nonlinear vibration absorbers. For this, a dynamic model of a two degrees of freedom system is developed. The Asymptotic Numerical Method (ANM) is used to solve the nonlinear equations of motion. The performance of this method is shown via a comparison with the Newton-Raphson method. The nonlinear modal analysis system with cubic nonlinearity is made by an explicit formulation of the nonlinear Frequency Response Functions (FRFs) and Nonlinear Normal Modes (MNNs). An experimental study is performed to validate the numerical results.

A large body of literature exists regarding linear and nonlinear dynamic absorbers, but the vast majority of it deals with linear primary structures. However, nonlinearity is a frequency occurrence in engineering applications. Therefore, the present thesis focuses on the mitigation of vibrations of nonlinear primary systems using nonlinear dynamic absorbers. Because most existing contributions about their design rely on optimization and sensitivity analysis procedures, which are computationally demanding, or on analytic methods, which may be limited to small-amplitude motions, this thesis sets the emphasis on a tuning procedure of nonlinear vibration absorbers that can be computationally tractable and treat strongly nonlinear regimes of motion. The proposed methodology is a two-step procedure relying on a frequency-energy based approach followed by a bifurcation analysis. The first step, carried out in the free vibration case, imposes the absorber to possess a qualitatively similar dependence on energy as the primary system. This gives rise to an optimal nonlinear functional form and an initial set of absorber parameters. Based upon these initial results, the second step, carried out in the forced vibration case, exploits the relevant information contained within the nonlinear frequency response functions, namely, the bifurcation points. Their tracking in parameter space enables the adjustment of the design parameter values to reach a suitable tuning of the absorber. The use of the resulting integrated tuning methodology on nonlinear vibration absorbers coupled to systems with nonlinear damping is then investigated. The objective lies in determining an appropriate functional form for the absorber so that the limit cycle oscillation suppression is maximized. Finally, the proposed tuning methodology of nonlinear vibration absorbers may impose the use of complicated nonlinear functional forms whose practical realization, using mechanical elements, may be difficult. In this context, an electro-mechanical nonlinear vibration absorber relying on piezoelectric shunting possesses attractive features as various functional forms for the absorber nonlinearity can be achieved through proper circuit design. The foundation of this new approach are laid down and the perspectives are discussed.